Assembling the Suncast Tremont 8x10 Resin Storage Shed
Vložit
- čas přidán 25. 06. 2020
- Putting together the plastic Suncast Tremont 8' x 10' storage shed. Hope this helps in your research!
Snapchat @ StewartMotoring
Instagram @ stewartmotoring
Facebook @ stewartmotoring - Jak na to + styl
Best video I've seen on the actual assembly yet. Thank you both for your time and hard work.
I put this up yesterday. Already had a good base from my old shed. I put it together by myself in 4/12 hours. Nice shed.
puling that mower in is what I needed to see. Helps me decide on shed size. - great review... thank you, sir!
Watched your video. Then studied the instructions and stood my Tremont up with 2 helpers in under 4 hours. Thanks so much or the video, super helpful and my shed is tight!
That's good news! Can you tell me how long it took to do the pre-assembly step? I need to hire someone to build mine and I want to be sure I'm charged a fair price. Thanks!
Getting ready to start mine, thanks for taking the time to help others!
Thanks for making this video, it was very helpful! I'm trying to choose a shed right now and this was really informative.
Just bought this for my Harley. Going to assemble it tomorrow with my old man. Thanks for the vid appreciate the tips 🤙🏻
First video I saw which showed any mention of screwing the floor down to the foundation. Great job. Thanks
Great Video, thank you for your time! Waiting on ours to deliver. We are going to bolt it in with 4" to 6" steel anchor rods.
What a nice thing to do thank you! You just sold me on buying one!
You've convinced me to purchase this shed. Very well made video.
Thank you
Best video I've seen on a shed!
Did all pre assembly on 8x10 tremont...waiting for 2 son n laws ta come over soon and put walls and roof on...and then I'll tie up loose ends....so far has been fairly easy
I like it! Nice shed. More space in the garage and shop! Gud job!
That's the plan!
Start on the left side, it went together pretty well. My floor didn't line up right, had about 1/4 in gap in the back left piece, played with it and got the outside diameter to line up.
I think this was the final nail in the coffin so to speak as this helped me make the decision to purchase this shed.
Thank you. Very helpful video. Is the structure and walls pretty sturdy compared to a wood Tuff shed in windy conditions?
Thank you for sharing. Helped give me a good idea of the project
The shed looks great. Can you provide the dimension of your concrete pad foundation and slanted entranceway?
A few questions, please -
1. How wide are the double doors edge-to-edge when both are swung fully open? I had my eyes on the same shed and would need to move the fence anyway.
2. Do you need any workspace in the back when putting up the back wall and the roof? If so, how much would you recommend?
3. You bolted the floor to the concrete slab at the end. I thought you'd always have to bolt the floor to the concrete slab before commencing erecting walls and things. In your opinion, which would make more sense?
4. I (will) have 110VAC at the site. Does the shed have any provision, such as anchor holes for conduits, for overhead work lights? I intend to use the space for my work bench and need power for my tools.
Thanks in advance for your answers.
Very well done video Stewart. I bought one to build & convert into a cat shelter (I have a mini cat rescue). I'm going to install shelving, have doggie doors installed and I contacted Suncast to find out they do have some windows I can purchase to install.
In your video you said it took approximately 5-6 hours to assemble. Does that include the pre-assembly time as well? Also, it looks fairly simple to disassemble (what's your thoughts?). This is going up temporarily, until I move.
Thanks!
Injust got mine on Wayfair. It was aabout $1800, and the placed it on special and on top I had a 15% coupon. I got it around $1680. Looks great. Will install today.
Im looking at the same shed. Few questions, is it reliable? Do you think can handle strong winds?
Where should I place this 10 by 8 shed in my 54’ wide and 50’ depth backyard? Should I place it at the corner with a 2 feet clearance? Facing which direction? my backyard faces west. Thanks
How are any gaps or holes in the shed? I'm looking at this shed, and am worried about mice in the winter.
Thank you! Very helpful!
Thank you so much for this video
Thanks for the video. Did you anchor it into the concrete somehow? I’m about to assemble same shed on a concrete slab and wondering if it’s necessary.
I did, I use some tapcon concrete anchors with the correct size drill bit in a couple spots on the floor. Only used 4-5 of them and they weren’t very long. Probably 2-3 inches long. Put a washer on them as well. Hope that helps
Great review ! 😄
Glad you liked it!
I just bought a plastic shed and my back yard is all concrete floor and it’s pretty flat and level. Should I just build the shed on it or should I have some kind of base built?
The base looks great I wish you also did a video when making it.
There are plenty of videos online of diy concrete slab foundations.
I seriously thinking about it. I know the biggest issue is the foundation. I'm only going 8x10 but I plan to use the block and wooden frame style foundation. I'm treating the wood with sealant then plywood on top of the wood. It's going to be a long job. Anyone tried the steel prefabed foundation?
Unrelated but how do you like the cub cadet? I've been looking at that one but can't decide lol
Working good for me, I cut twice a week. Does sometimes struggle if you let grass get too long or if your trying to scalp a yard. There is a boost setting though sometimes helps. But I cut often it doesn’t stress. I bought used and last year could cut my .5 acre yard 3 times before charging.. this year about 1 time as I think I need to replace batteries. They are probably still oem batteries so several years old. I knew buying it they may need replaced.
@@StewartMotoring how long did it take to put this together
Hey just a question - can we replace the locks or door handles on these sheds? Having a hard time figuring out if I can buy a replacement part on this shed. Wonderful video - thank you!
Sorry, I am not sure. I haven’t looked into replacement items
Next video. Does the front and back air vents Have any kind of screen to prevent pests from coming in included?
Yes, a screen goes over the vents. Like a door screen
Can you screw into the walls for shelves and hanging tools etc?
Good video, thanks!
How is the shed holding up 2 years later?
Do you think it seals up well enough to keep rodents out? Mice ect?
great video
We built ours yesterday, cant find where to put the long thin angled metal strips (roof supports???)
Great video for those of us that are not pros, and restored my faith in humankind at the same time. Thank you🙂
What was the cost of that concrete foundation? I just ordered the same shed.
For future reference, the "bar" that spans front to back would be the "ridge" beam.
I was thinking the exact same thing lol
Thank you for the video. I'm leaning towards Suncast versus Lifetime however I would prefer a 10x8 instead of 8x10. Based on my searches Suncast doesn't make a 10x8. What were the dimensions for the concrete slab? If the shed is 8x10 I'm guessing maybe 9x11 for the slab not counting the concrete ramp?
9x11 would be good. I made my slab I bit smaller. Essentially when I did the measurements I gave 3 inches of space on each side. So + 6 inches on the width and length. I recommend going to the Menards website and looking at the demensions as the actual size isn’t exactly 8x10. I think it’s a couple inches bigger. www.menards.com/main/outdoors/sheds-accessories/sheds/suncast-reg-tremont-reg/bms8100/p-1444444189057-c-9658.htm
Overall Width
100-1/2 inch
Interior Width
93 inch
Overall Depth
122-1/4 inch
Interior Depth
117 inch
Hey looking into buying this shed for my yard - quick question. What are the measurements of the boxes the parts initially come in? Want to make sure I have a large enough vehicle to pick them up in.
Sorry I can’t answer that. I’m not sure.
How much was the concrete pad? How much psi rating did you go with?
what are the measurements of the base concrete ?
thank you for your comprehensive video. Do you think putting the shed on pavers would work?
Yea I think pavers would be fine as long as you’re base below the pavers are the appropriate material. Like you’re doing a sidewalk with them
@@StewartMotoring thanks for the feedback.
Shed looks awesome , I just bought one, yours looks great, you happy with it still even though its been two years since this video was done ?
Yep
Did you have trouble with the nuts and bolts? My nuts seem to have a stopper making it impossible to tighten?
Sorry I don’t remember having an issue like that
Hmmmm. I was looking into tough shed but something this size is over 3K, might go with something like this now!
Great video, thank you! Do you think I could cut it and add windows? I want to convert it into a goat barn. Thank you!
Definitely
Shout out to your wife for doing all the hard work. Lol
Nice job boss
When you put the metal hinges on the door how did you do it? Cause I noticed the round part is still molded to the door did you have to cut it or just fight with it a little bit to get the bracket on?
Sorry I don’t remember any issues with the hinges. I thought they just fit snug over the plastic. I can try and help and send some pictures but you gotta message me on fb or Instagram
@@StewartMotoring I ended up getting it with a little more research and sleep haha if your hinges snap I did find a fix that makes it even better.
I just got the exact same shed . Thanks for the video . Please come help me in NC
Haha good luck with that. I tried every friend I had, NOPE. Just me and the girl had to tackle this one
How big was the cement pad that you poured? And what was the cost that you paid?
I made the cement pad about 3 inches wider than the shed on each side and then in the front made the ramp. It was about 250~300 dollars for the concrete pour and I spread it myself
nice video - to save cost and not have to rent a van from Menards, do you think the 2 boxes would fit in a say the back of a Jeep cherokee sport? based on the video, my visual view thinks it might but do you recall the size of the boxes (Length, width)?
I don’t think it will. My van fits 8x4 sheets of osb board easy and these were not going to fit so I had to get a trailer. But, you could go up to Menards and give the boxes a measure before you purchase.
@@StewartMotoring thanks for the quick reply, I think I might just bite the bullet and rent a van from Menards for $30 bucks. It's not really the money , just trying to save myself an extra trip back. I'll be going to Menards after work to check it out but I think you sold me as this was a great video.
What’s the dimension of the concreate slab for a 10 by 8
I did the same shed but I poured a 12 x 9 slab. This left room in front of the door way and roughly a few inches around the shed. Look at the shed dimensions, remember the dimensions for assembled size is larger than the interior dimensions. The sun cast tremont shed assembled size is 8’ 4-1/2” and 10 ft 2-1/4”.
Great video. Where did you get it from and how much?
Menards it was around 1,100 after rebate. Was supposed to be 900s but taxes!!
Where to buy this shed?
Candace should be assembled if you only have access from the inside. I only have about 12 inches of space all the way around the outside so it may be difficult to work around the perimeter
what size is the floor ?
Great job. How about adding some catches to secure the doors open so they don’t flap in the wind?
Yea, I’m thinking a rod that can drop down into a pipe I put into the ground. Kinda like chain link fences gates. Maybe idk
Nice video. If you don't mind me asking, how much was that concrete slab? Dimensions?
Thanks
I paid 300$ for the concrete. I can’t remember how many yards it was and my pad was 1ft bigger in lxw than the shed
@@StewartMotoring Thank you, appreciate it. Looking at starting mine as well. Just trying to get an idea of the foundation. I like how you did yours.
Hi, where did you buy this one and how much was it ?
And great job. Looks great
Menards, but I can’t remember how much. It was a bit more than 1k I think
Thank you
Do you know the size of the tool that they gave you for the tan color plastic screws?
sorry I don't
How has the shed held up so far? Looking at this or a wooden one. Thank you.
Holding up good. No real complaints at this point. I did build wood shelving for storage in it
so I just poured my slab at 10x10. you think it'll be too small for this shed?
Here are the specific dimensions of the shed. Dimensions: 8' 4-1/2" W x 10' 2-1/4" D x 8' 7" H
Stewart Motoring so I’m screwed , it’s gonna hang over about an inch on each side
If you really want this size shed, there are options. First one I think of is laying like 2ftx2ft pavers on the side. Adds extra room, maybe gives you a walk way? Just a thought.
What did you do for anchoring the shed down?
Tapcon screws through the plastic floor into concrete. Big washers on them
How does it do in high winds
I guess I'm going to find out when I have some high winds...
I just got this same 1 too with no instructions where did you find them online?
hw.menardc.com/main/items/media/SUNCA001/Install_Instruct/1932670-BMS8100-manual-41416.pdf
awesome thanks say a prayer its just me and my wife doing it too lol
@@StewartMotoring Thanks for the link
Where did u order the extra corner shelves from? Can't find for suncast...
They came with mine
@@StewartMotoring ok. where can u get extra shelves?
Is it still holding up and water proof?
Still doing good. No leaks that I know of
Any issues with the wind? I know you bolted to the cement. Just curious with it being lighter than wood.
Still standing strong
Is there a way to not have the floor mats and just have it on the concrete?
The flooring holds the walls together. Can’t see a way around that
do you ever see mice in there? are there any gaps around the bottom?
Have not caught any rodents in there so far. Gaps are quite small and minimal around the base because of the way the plastic squeezes together.
Unfortunately my cement foundation got poured exactly 10x10' Will it still suffice for this Tremont?
Sheds actual dimensions
Overall Width
100-1/2 inch
Interior Width
93 inch
Overall Depth
122-1/4 inch
Interior Depth
117 inch
So it looks like you’ll be about an inch short on front/back.. imo it would still fit. Maybe outline it in bricks if you don’t like how it looks but I think an inch overhang would be fine. Or 2 inch overhang in the back would fine if you don’t want it overhanging in the front. Just my opinion
@@StewartMotoring I kinda figured on that. I still appreciate the reassurance! I was pretty bummed when I measured it. Should of just had them do 11 x 11! lol
I have the same issue with a previously poured pad. My intention is to add a border of gravel to the rear of the shed where it would overhang. Leaving the front of the shed with a few inches near the doors/ramp. How did you make out with assembly?
@@pumpkin13pinkoe It was fine. That little bit of difference was nothing to worry about. Just cut the difference when you place the floor.
Good job....wife needs more credit.
How big is each box? Will one fit in a mini van?
Dat Tran I don’t think they will fit in a minivan
No they will not, package dimensions are just over 4 feet wide. I was pretty pissed when I went to pick this up, never had a project I couldn't fit in the back of my Grand Caravan, lol.
Lmao, I have a minivan too and I use it to pickup everything. OSB board 4x8 and pvc pipe, everything. But yea had to use a trailer for this shed.
Can I just put it on level ground without concrete
I wouldn’t suggest it. But I’m sure having it straight on dirt would work for a while.. but the floor may become uneven and unstable since dirt easily subject to water and downward pressure. Id recommend at least some pavers below it.
Any chance you made a video on that poured concrete foundation for the shed, great video.
I didn’t. It wouldn’t have been helpful though as I had barely a clue of what I was doing. Basically make a form - put some rebar in it inch or two above grade - call a cement company have them come pour it - buy some cheap concrete tools from menards and rent their expensive float tool. Do the best you can. Lol
Would of been nice to actually get an assemble step by step type of video but either way thanks for the video was nice to see the situation with it all payed out
How much did the concrete cost?
320$ for only the concrete
Can you slide it to a different location once it has bin put together? IT BLOCKS MY KITCHEN WINDOW NOW I DIDN'T RELIZE IT WAS GOING TO BLOCK THE WINDOW
Yea, it’s pretty light
Is it necessary absolutely to have a base?
Not at all, but some kind of base, patio pavers at least would be better than on dirt. But hey, on dirt would still probably workout fine
@@StewartMotoring thanks a million, starting mine as we speak
Would you happen to know the maximum width of the entrance?
That info should be in the specification document of the shed. I don’t know off my head
bro im more interested in that electric zero turn
The thing scoots
How much do the shed cost?
Was around 1k
You wife doesn't look happy. Strange, they say the couple that builds a shed together stays together :> Good shed and good looking couple. Any updates? I heard some of the rubbermaid ones had walls that bow out.
Lol. It’s holding up still. Walls are fine. No leaks
OP
Looking at your video, it seems like the shed is actually 6' x 8' ? I mean, no way are you 8' tall. ??
what was the measurement of the base
Should be in the comments or description. I’ve put dimensions before
Best, mua, here is my kiss
How much was the shed?
Think it was on sale just a bit under 1k pre tax..
@@StewartMotoring thx. Good vid
How about give some credit to the beautiful helper she is a hard worker 😊😊😊😊😊
That woman does not look enthused
What's the point in making a how to build video when you fast forward far away shot construction over music with no narration?
How expensive was this shed to purchase please let me know thank you