How to Replace Front Window Regulator with Motor 2003-2008 Toyota Corolla
Vložit
- čas přidán 7. 09. 2024
- Buy Now!
New Power Window Motor & Regulator Assembly from 1AAuto.com 1aau.to/ia/1AWR...
This video shows you how to install a front window regulator with motor on your 2003-2008 Toyota Corolla. Most power window problems can be traced back to either the regulator or the motor that drives it. TRQ produces affordable window regulators and motors that are designed specifically to fit your vehicle!
This process should be similar on the following vehicles:
2003 Toyota Corolla
2004 Toyota Corolla
2005 Toyota Corolla
2006 Toyota Corolla
2007 Toyota Corolla
2008 Toyota Corolla
Tools you will need:
• Phillips Head Screwdriver 1aau.to/obfq/1A...
• 10mm Socket 1aau.to/oa3L/1A...
• Trim Tool Set 1aau.to/o6Y/1AX...
• Ratchet 1aau.to/obuR/1A...
• Gloves 1aau.to/oUe/1AX...
• Safety Glasses 1aau.to/oMu/1AX...
• Pick 1aau.to/oLC/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Thank you for posting this. I just supervised my 15 year old daughter changing out a bad motor in our 2003 Corolla. We had one slight issue that you didn't cover in the video though. Our motor quit when the window was all the way down. Small hands and a little ingenuity resolved the issue. We removed the speaker and that gave her just enough room to get the forward bottom bolt. It took us quite a bit longer than it did you, however, I will forever cherish the time her and I spent together doing this. You're video is now part of a forever memory in our family. Much thanks.
+DiscipleJohn Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
Should have explained it if the regulator is out and the window is stuck down.
For everyone here with their window stuck down like mine was. If you will unscrew all the bolts for the motor, you can slide the whole assembly up and gain access to the other window bolt. You're welcome
This video was a life saver, I thought it'd be way more difficult but you made it so easy.
How do you raise the window if it don’t work. WHY would anyone be doing all this if the window worked.
How do you line up the bolt in hole if you can’t use master switch to roll window up? I believe my motor is shot. So basically I need a manual way to raise window up to line up bolt for removal. Every video I’ve seen they use the switch, must be nice! 😂
I am a 56yr old woman who tries to do things on my own(no bf/husband to help, lol, don’t need one. Anyway, with your instructions and advice I will attempt to do it this weekend. Fingers crossed nothing goes wrong 😂 Btw…best video posted on this subject!
+@RoseRodriguez-dz1yb Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
I picked up an '04 Matrix last week to learn manual as a project. Window died. Video saved me and I was able to perform the replacement solo. Huge accomplishment for me since I'm more of the lightbulbs and air filters crowd.
My car power window glass got displaced. Thank you. With your video, I was able to fix it by myself. Keep up the good work
What if my window regulator does not move up or down? How do i take the bolts out?
If your window is stuck down you can try taking the panel off, and while rolling the window up give the door a whack near the window motor and it may allow you to roll the window up. It worked for me and let me drive around for a couple weeks with limiting rolling ability
Thanks for the video, really well done, I don't understand English but it was understanding every step of the work, so I will be able to fix my window regulator on my corolla TS.
Do you have a video doing the window run channel seal? Excellent video!
If the window is stuck and you cannot access the nut through the hole, just unscrew all the nuts holding the regulator to the door and the whole assembly, including the window, can be moved freely. That's what I did for mine.
Very well done. Thank you for posting this.
My window will not operate now, how can you move the window when it wont move electrically?
Thank you for this video! Could not have done it without your guidance.
Thanks for this! It’s very thorough. Going to get parts and try it
❤very help video. Excellent demonstration and worked perfectly on my car. Thank you.
Use a heat gun to warm up the butyl seal removal and installation.
Thanks for the video......made the job doable!
Thanks for good video . Video can be improved by telling the name of different parts. Like hook and others parts help in morning slot
Thank you. You save my money.
Thank you sir, I just paid 200$ to a mechanic to replace it, I could easily done it myself shit
Thanks
One thing i do hate about doing mechanic work on cars is the dam connector's they are frustrating the different ways they design them 😠🤨😊
Amazing! Thank you for sharing!!!
my motor isnt working. and the window is closed. is there a manual way to lower the window so that i can use the access hole to unblock the glass from the regulator arm?
Awesome video. Thank you!!!!
Thank you!
Why did you replace it? What was wrong with the elevator?
I find it easier to replace the door