HB Toys Wilderness R1011 Wrangler Brushless Upgrades and Waterproofing
Vložit
- čas přidán 7. 08. 2024
- HB Toys Wilderness R1011 (or the R1012, R1013, R1014), the upgraded version of the R1001 Beluga, gets major upgrades for this RC crawler. Maybe a Traxxas TRX4 clone but for the price of the trail truck and the experience with the HB Toys Wilderness Beluga R1001, it is worth the upgrades. We upgrade the motor to a brushless HobbyWing Fusion SE 1800kv, FlashHobby 35KG servo, Treal wheel, Injora Silicone Inserts, and we address the receiver issue by attempting to waterproof it! This truck should now be a Trail Truck Master and very formidable and competent RC rock crawler.
The Truck:
www.banggood.com/custlink/Gvm...
HobbyWing Fusion SE 1800kv
amzn.to/4afull9
HobbyWing Programming Card
amzn.to/3UVvY3i
FlashHobby 35KG servo
amzn.to/3y9Jib8
ARB diff covers
amzn.to/3JWDbcX
Treal Metal Beadlocks
amzn.to/3WD93uK
Ascent Fusion Tires
www.redcatracing.com/products...
Injora Silicone inserts
amzn.to/4dsFIZU
Silicone Conformal Coating
amzn.to/3UF8Ap4
#rccrawler #rccar #upgrades
Look at you go! Nice video!
Thanks, man!
Great videos, I’m following along. I’ve got one of each the beluga and the wilderness (Jeep 😂).
They’re really good for the price! Makes upgrading then affordable
Great upgrades Corey
Thank you, Dirk!
great upgrades, should make a huge difference 😀😀👍👍😎
This thing is a monster now!
Awesome up-grades for a very cool RC!!!
🐼🏆🐻❄️👍🏻
Thks for the tutorial and info share!!!
Appreciate the kind words!
You're welcome my Friend!
Keep the Awesome Work
Anything other than Traxxass is great! I've been looking at these and I really like them alot from what I've seen. I'm curious about how yours will perform..... Hopefully well
Pretty well! There is one more video on this truck where I finally get to test out the upgrades, I have a playlist for the R1001 and R1011, appreciate you checking out the video!
Thanks for the video, Corey. Besides the plastic gear in the video, can you check if the transmission gears are metal or plastic?
Next time I have it open I'll let you know, but I'm guessing they're plastic
Man I'm trying to figure out how to change the color on the lightbar. Is only white. I can change the settings on the regular lights but not the bar. I can't see when you press the light button to change the lights because is of camera.
Give me a bit and I’ll fire mine up, not at home at the moment. One of the buttons you need to hit twice in quick succession to toggle between the colors.
@@YARCWest Thanks a l ot for your reply. I played a little with it and managed to find the setting. Thanks! :)
Awesome!
What grease do you use? I was told TA black grease is good. Is it?
For the R1011 I used Super Lube 92003 Silicone Lubricating Grease with PTFE, which seems to be great and is much cheaper than "RC grease". I don't really see myself switching to anything else in the future.
Great video. I just got mine and I will replace the motor as well but i will use a 2300kv, which I already have. I would like to know what is that wire coming from the stock ESC and going to the rear for? Is it for the lights? I noticed you removed the ESC but didn't say anything about the wire, and I assume you didn't connect that wire again? Is the red and black wire coming from the ESC and going to the rear of the car.
I replied to the comment in the other video but in case anyone may have the same question and sees your comment, that wire that runs from the ESC to the rear of the truck is the power switch
@@YARCWest So were you able to use it after you removed the ESC?
To be clear, we're talking about the wire from the stock ESC to leads to a switch right?
The wire at 2:28 that runs to the back is the on off switch for the stock ESC, once you install the brushless motor (if it is Hobbywing) it is a motor and ESC in one so it has it's own power switch.
@@YARCWest Ok thanks. I was just wondering if you decided to use that switch. so you ended up using the power button that comes with the motor.