How to Install a Tempered Glass Screen Protector on your Phone

Sdílet
Vložit
  • čas přidán 24. 07. 2020
  • This video will show you how to install a tempered glass screen protector on your smart phone (Iphone or android).
  • Jak na to + styl

Komentáře • 481

  • @sunnyscott4876
    @sunnyscott4876 Před 2 lety +18

    Thank you so much. I am a 73 year old lady and I just got a brand new smart phone.
    Your suggestions are excellent, especially using Scotch tape as a hinge. I didn't get me screen protector on perfectly (a few small bubbles) but I can live with those. You can only see them if the screen is completely black.
    Thank you again for ou very kind and helpful suggestions.🧡💛💚

  • @christwist8397
    @christwist8397 Před 5 měsíci +15

    Very helpful video.
    Some suggestions:
    - As you lower the protector, push 3 spread fingers from your spare hand against its hinged edge. This prevents the edge of the protector from raising slightly and shifting. With this technique, there is no need to use a stickier tape. The provided sticky tabs work well if you do this.
    - When making minor adjustments, the provided sticky tabs are easier to adjust than very sticky tape.
    - Before removing the protective film, practise the folding technique repeatedly, until you are certain that you are doing it correctly.

  • @jayczzzya
    @jayczzzya Před 3 lety +139

    Installing a screen protector used to feel like brain surgery before I watched this video. Your instructions were perfect. There was a scary moment though when I noticed in the corner of my eye my cat was staring at me the whole time waiting to pounce on the screen and get her fur in there just before I pressed the screen protector. But, she behaved.

    • @chocho6766
      @chocho6766 Před 2 lety +5

      nice cat

    • @erysyy
      @erysyy Před 2 lety +5

      this made me so anxious dkfjhdjkfh

    • @rmwolfe
      @rmwolfe Před 2 lety +6

      😂

    • @notundermywatch3163
      @notundermywatch3163 Před 2 lety +7

      lmfao must have been so nerve racking😂 My four year-old walked into the room and came breathing in my neck right at that moment getting ready to poke it any time. I kept my cool and said " Honey, please get out of the room."

    • @GreatMindsSeekTruth
      @GreatMindsSeekTruth Před 2 lety +3

      I’m cracking up right now because I just told my kitten to get her hairy tail off my phone 🤣

  • @SANA-bw2nx
    @SANA-bw2nx Před 7 měsíci +6

    Very helpful to encourage people to do it by themselves. I had change mine at the mobile store the price with 5 times more expensive than the real price of the glass screen. Thank you for the clear demonstration without wasting time.

  • @mastersofimpact5740
    @mastersofimpact5740 Před rokem +24

    After taking my phone to a shop for years when it was time to refresh the glass, I decided last night to remove the tempered glass on my own and install a new one. I watched several videos, but I was still hesitant to give it a go. Until you saw your video suggesting to hinge the screen on one side with tape. I am so pleased with the result. It's absolute perfection, far better than the shop installation that was always acceptable but had a little bubble here and there. Thank you so much!

    • @DrMurdercock
      @DrMurdercock Před rokem +2

      How much if you don't mind me asking? I think I've been in the wrong business of fixing game consoles, I should be offering this as well

    • @mastersofimpact5740
      @mastersofimpact5740 Před rokem

      @@DrMurdercock £10 in London done, but I remember paying $30 in the US years ago.

    • @DrMurdercock
      @DrMurdercock Před rokem +2

      @@mastersofimpact5740 You know, after thinking a bit. I never attempted to do this before seeing this video. And if I had an expensive phone and the cover was also somewhat pricey, I would have probably taken it in too.
      I wouldn't feel right charging 30 charging bucks for this. Who ever charged you that here needs to step in fresh cat poo. 10 bucks you is like 12 bucks me so thats way more in the ball park of paying for a service like thart

  • @wayneborland6974
    @wayneborland6974 Před 2 lety +3

    This actually was the first time ever I tried to install a Screen Protector. I went from the video to our two phones following directions to a tee. I did good and actually surprised my wife. Today was a good D A Y. Just follow the instructions and you shall succeed. Have fun and good luck.

    • @gamer2101
      @gamer2101 Před 2 lety +2

      Happy wife=happy life!! Lol

  • @saracosta1989
    @saracosta1989 Před 2 lety +12

    First, thank you SO MUCH for not trying to be "cutesy" or long-winded with the intro...no one likes that, and you got straight to the point. Second, you are extremely well-spoken, concise and meaningful; what you said and pointed out made absolute sense and was very easy to follow. Whatever you do or your career aspirations are, you make a great speaker, trainer and presenter. Well done here. One slight hack: rather than making multiple "hinges" with the tape, apply it LENGTH-wise (not width wise in several places) and you'll get a much better/solid "hinge" as well as a better gauge on whether or not you've aligned it well (the tape will becomes your guide).

    • @mi2maui
      @mi2maui Před rokem

      How about using 1.88" FROG TAPE for the hinge? One piece length-wise? I just bought a roll for other reasons, is it sticky enough? I think so ...

  • @jayc3110
    @jayc3110 Před rokem +19

    That was an excellent and detailed demonstration. Well done. Thank you and best wishes.

  • @snowballinhell
    @snowballinhell Před 3 lety +30

    I did it, I put my glass protector on my phone. Went great and that is because of your great directions. Thank you!!!

  • @rawlsrules
    @rawlsrules Před 8 měsíci +6

    It is an excellent demonstration and it is greatly appreciated by someone brand new to this stuff. Thank you.

  • @wakeup7157
    @wakeup7157 Před 8 měsíci +3

    I have just put mine on by following the process. In a few seconds it sticks automatically perfectly without any bubble. One more tip - I folded a bit of the edge of the tape so that it's easier to remove from the protector.

  • @philwilliams8328
    @philwilliams8328 Před 13 dny

    Great idea using the tape. Worked flawlessly and not one little bubble to contend with.

  • @sskzzx
    @sskzzx Před rokem +52

    this was my first time installing a glass protector, i usually have it done by the people who work at the place i get it from and this video was endlessly helpful, i managed to flawlessly do it to mine and my mom's phones!! thank you so much, this is the best tutorial ever

  • @mercedesescoto-wagner4015
    @mercedesescoto-wagner4015 Před 6 měsíci

    Thank you so much as long as I have been using tempered glass I always messed it up for the sheer fact that I had no idea what the guide stickers were for and finally this time my tempered glass is on without dust spots inside and aligned perfectly! Thank you for this video!!!

  • @theMRminty
    @theMRminty Před 2 lety +4

    I ended up just dropping it on there, lol! But thank you for the instructions! I have a one year old who wasn't trying to let mommy hold the phone that long without his help. 🤣♥️

  • @ShastaBean
    @ShastaBean Před 9 měsíci

    First time putting one on...no telling what sort of cluster-jumble I would have accomplished w/o your video.
    In the end, it came out perfect!
    Thanks!

  • @OldFirmBoots
    @OldFirmBoots Před 3 lety +7

    Just followed your steps, it worked perfectly, thanks for that!❤️

  • @primis82
    @primis82 Před rokem +3

    Thanks so much for clear and easy to follow instructions, I never knew what those guide strips were for before!

  • @sagittariusinneedoflove
    @sagittariusinneedoflove Před rokem +13

    Thank you so much for the tape trick ❤ I made the hinge, cleaned the screen again, peeled the tab off & let go with my eyes closed 😂😂 opened my eyes & it was bonding to the screen with no air bubbles 🥳🥳🥳 I will tag this video in my Amazon review as a reference.

  • @domainNameDotCom
    @domainNameDotCom Před 3 lety +42

    This was very helpful. I'd only add "make sure you have a bright picture on screen so you can check alignment really easy"

    • @mcpardanme3443
      @mcpardanme3443 Před 3 lety +2

      Lmao yeah I had to have a bright screen to check the alignment worked out great tho

  • @angrydogface
    @angrydogface Před 3 lety +14

    Very helpful. The cover didn't come with any instructions!!! Your video made it all easy and doable. Thanks!

  • @asktarotkim2326
    @asktarotkim2326 Před 3 lety +3

    I watched the video link that came with my screen protector, but they talked too quickly plus some extra implements for application were used that I didn't get in my package so it was confusing as well. You present a very friendly helpful video very suited to the middle aged+ crowd. Thank you.

  • @PhysicalHydrology
    @PhysicalHydrology Před 26 dny

    Thanks so much! Your method works well! Did not see the black part forming for my particular protector screen, but no bubbles: the protector screen fitted perfectly in one go.

  • @ophelion3641
    @ophelion3641 Před 3 lety +107

    Thanks for your walkthrough, dear sir. Installing glass is always terrifying (what if a speck of dust remains under the glass forever, what if it is 1 mm off, what if, ...), so your video made it much easier for me.

    • @ronch550
      @ronch550 Před 3 lety +6

      It's much easier to install glass than plastic screen protectors. Much easier to avoid bubbles.

    • @wanderingandroid
      @wanderingandroid Před 2 lety +3

      that speck of dust will annoy you especially if it is somewhere in the middle. the glass i just installed had a speck of dust but thankfully it is somewhere along the edge. so i can live with it.

    • @pennyhardaway7491
      @pennyhardaway7491 Před 2 lety

      Turn on shower for 5-10 mins to steam the room and reduce airborne dust particles

  • @wakeupuk3860
    @wakeupuk3860 Před rokem +25

    As an ex teacher from industry who has taught Physics and CDT to kids and novice teachers it is an absolute delight to find a CZcamsr who actually knows how to present properly, very clear, nice touch with the tape, warm enthusiastic voice and considering in the past with two older mobiles made a right mess of things, now feel very confident of doing it properly. Will certainly now look to see what else you have on here.

  • @murderdoggg
    @murderdoggg Před 2 lety +2

    Thank you. The trick of using the tabs to hold the glass straight really helped.

  • @komalsingh30677
    @komalsingh30677 Před 2 lety +2

    Excellent job .For the first time I have put my screen guard perfectly!!!!Thank you so much

  • @oakjand
    @oakjand Před 8 měsíci

    Excellent instructions! I had zero bubbles to push out.

  • @RainbowUnicorns2023
    @RainbowUnicorns2023 Před rokem +2

    Hi Geo, thank you so much! First time I ever installed a screen protector!
    Total success with using tape!👍🏻👍🏻👍🏻👍🏻👍🏻

  • @sherylanecarino5454
    @sherylanecarino5454 Před 2 lety

    Installed tempered glass on my phone for the first time. Thanks for sharing this helpful video!

  • @LoLa-uf8yu
    @LoLa-uf8yu Před 8 měsíci

    Thank you! I thought I had destroyed my last screen protector when I removed it to get a speck of dirt off. Washing it and drying with a hair dryer worked! ❤

  • @RadimSafran
    @RadimSafran Před 2 lety +2

    Wow, I just used your technique and I'm amazed at how well it works... 👌☺

  • @theyjustwantyourmoney4539
    @theyjustwantyourmoney4539 Před 5 měsíci

    Thanks for the tape hinge idea, 🙏 I was dreading to even start the installation bubbles

  • @pm8196
    @pm8196 Před 3 lety +2

    Simply the best video.! Good on you for keeping the instructions simple

  • @mutsasamanthasithole2108
    @mutsasamanthasithole2108 Před 10 měsíci

    Thank you, followed your instructions and it's flawless!!

  • @supersaiyanjohn3012
    @supersaiyanjohn3012 Před rokem +1

    Just did it perfectly without a single bubble, thank you !

  • @JohnGlen502
    @JohnGlen502 Před 6 měsíci

    Lots of big tape as sturdy hinge on other side of pull tab was super helpful. Thank you.

  • @Hope-ip5fj
    @Hope-ip5fj Před 2 lety

    Best video ever, no bubbles. Perfect!!

  • @caroldelong4732
    @caroldelong4732 Před 3 lety +1

    Thank you so much. I've never gotten one on before, worked great, not one bubble.

  • @TheNicky9905
    @TheNicky9905 Před 2 lety +1

    Brilliant thanks so much, I've never had much luck installing these things, now I'm confident I can get one onto a new FitBit Charge 5 with a curved face I've kept in its box for the last week (a gift I've been cautious of defacing before getting the screen protector on it) it really did help me out, I really did enjoy it, I've given a thumbs up and subscribed as requested, thanks again!

  • @mjp23
    @mjp23 Před 2 lety +2

    This is always a very challenging thing to do. I didn't know how to use the tape or sticky guides, so thank you

  • @DrMurdercock
    @DrMurdercock Před rokem

    Ty sir. Never put one on before. Got it on perfect

  • @nurulhusnamohamadfadhil5886

    I had tried this method and it's 100% working!Thank you!

  • @patwiggins7299
    @patwiggins7299 Před rokem +1

    This was perfect! Great video. I still ended up with what seems like a tiny flaw/bubble thing - bu nothing compared to the old cracked screen protector I replaced. Feels like I have a new phone 😂- but, no, it's pretty old, it just looks great now.

  • @IwdddeDOawwa
    @IwdddeDOawwa Před 2 lety +1

    Thanks for this video. Managed to install the protector without any issues!!!

  • @Trish7725
    @Trish7725 Před 3 měsíci

    This worked like a charm. I am so happy I checked you out, saved a lot of money.

  • @sazonada
    @sazonada Před 3 lety +1

    Wow! I didn't have a single bubble. Thank you so much for the advice!!!

  • @cbsakron
    @cbsakron Před 10 měsíci +1

    Thank you for your video! I have a perfectly placed, bubble free phone cover. The tape is an awesome idea!

  • @Bossmanrocks
    @Bossmanrocks Před 11 měsíci +1

    Thank you so much for this. My kit did not come with tape to hold it in place, so it is great to know that I can use regular tape to do the job.

  • @ryannarain3539
    @ryannarain3539 Před rokem

    Thank you! Very helpful!

  • @TheFrostlarsen
    @TheFrostlarsen Před 2 lety +1

    Just what I needed! Thanks!

  • @dankeith6756
    @dankeith6756 Před 2 lety

    I've only installed one screen protector and it didn't go well. LOL Never tried the hinge method. It worked great!! Thanks

  • @jswarpaint6215
    @jswarpaint6215 Před 2 lety

    Great video thanks for being thorough - Realizing we are looking for a video to help us do something that we may be completely clueless on what we are doing

  • @lizpahlke379
    @lizpahlke379 Před 3 měsíci

    This was a very, very helpful video. Thank you!

  • @mspenny719
    @mspenny719 Před 6 měsíci

    Excellent idea to tape screen to form a "hinge". Works great!!

  • @SuperPatatim
    @SuperPatatim Před rokem +1

    Thank you! That was flawless!!

  • @kevinwhitley5577
    @kevinwhitley5577 Před 10 měsíci

    Awesome advice just bought a really nice promotional cell phone bad thing is there's no accessories available yet other then what come with the phone so only one screen saver most don't get it right the first time including myself however your video helped me ace it the first time and no bubbles either . Thanks my friend

  • @dgriffin6074
    @dgriffin6074 Před 10 měsíci +1

    Perhaps masking tape e.g. the blue 3 M painters' tape would work better for the "hinges"? I know some of the screen protector companies supply a model specific plastic frame to ensure proper alignment of the SP and phone screen. I just used one with on my Galaxy S8, and it was the least troublesome installation I've had and no bubbles whatsoever.

  • @MrBen101199
    @MrBen101199 Před 2 lety +8

    Thank you. I didn't know what was the "guide stickers" for. So I just installed the protector without them 😂

  • @VengeFulHemi
    @VengeFulHemi Před 3 lety +15

    Great video, excellent tip with the scotch tape too. For the bubbles you could use a kitchen rolling pin(very gently of course), or buy a dowel frome depot or Lowes before starting another screen protector job.

    • @GrammyGottaGo
      @GrammyGottaGo Před rokem

      I have always had good luck with a credit card

    • @haleyh2912
      @haleyh2912 Před 2 měsíci

      @@GrammyGottaGothat’s what I use every time a credit card and it works well

  • @eilachisholm5037
    @eilachisholm5037 Před 5 měsíci

    This is a very clear explanation how to put on the screen protector. Very cleaver way to use the tape. Thanks so much. I am glad I found this video!

  • @Dahstin
    @Dahstin Před rokem

    You are a damb genius Gump! You will be a 4 star general one day...outstanding!

  • @lydianiewesley9076
    @lydianiewesley9076 Před 3 lety +3

    Your video was very helpful..thanks a lot!

  • @marikagreene3735
    @marikagreene3735 Před rokem

    Thank you so much. I really appreciate this

  • @misswordlesswonder
    @misswordlesswonder Před rokem

    Thanks so much for this, super helpful and you explained it so well, my new phone is protected and doesn't have any bubbles!

  • @marieocheong8679
    @marieocheong8679 Před rokem

    Thanks, turned out great!

  • @vivwhite8673
    @vivwhite8673 Před rokem

    This is very helpful, thank you!

  • @gabriellakorda7477
    @gabriellakorda7477 Před 3 měsíci

    Thank you so much. I used your guide and feel like a professional haha. It worked perfectly and I don't need to waste money anymore for someone else to do it for me 😀

  • @imadaaoun
    @imadaaoun Před rokem +3

    This was an excellent video demonstration. Thank you so much. One question : do you have a method to remove scratches from the mobile screens ? Thank you for your reply .

  • @margaretgosselink8535
    @margaretgosselink8535 Před rokem +1

    Could not have done it without you! Thanks

  • @danielamarinsejnaui9611
    @danielamarinsejnaui9611 Před 8 měsíci

    What an amazing video!!! Worked perfectly following your instructions. Thank you

  • @stephenmason5682
    @stephenmason5682 Před rokem

    excellent demo... !

  • @langstonanderson6558
    @langstonanderson6558 Před 3 lety

    Very helpful! THANK YOU.

  • @rodolfohernandez772
    @rodolfohernandez772 Před rokem

    Thanks for this!!

  • @tongkatali6904
    @tongkatali6904 Před rokem

    Excellent! Thank you

  • @tMasterAO
    @tMasterAO Před 2 lety +1

    Thanks for an informative guide to apply the screen protector!

  • @jonelljones5631
    @jonelljones5631 Před 7 měsíci

    Thank you for making this application so simple.😊

  • @hvyduty1220
    @hvyduty1220 Před rokem

    Thank you much nicely done!

  • @lelo4718
    @lelo4718 Před 2 lety

    Applied an iPhone 12 glass protector following every steps in this video and it came out flawlessly

  • @sydneymarshall3204
    @sydneymarshall3204 Před 6 měsíci

    Finally had to find a vid after fighting the remaining protector I have to not have all these weird dirt specks under it. It makes me so mad. Broke down and ordered more. Better study up for the big test!
    The hinge is genius. Can’t believe I didn’t think of that in the battle of the screen protector today.

  • @JWiLLfoReaL
    @JWiLLfoReaL Před rokem

    I tried this and it worked no bubbles. Instant subscriber.

  • @jmadhusudhanan
    @jmadhusudhanan Před 2 lety +2

    This helps me to do with perfection. Absolutely no bubbles.

  • @GrapeWizard667
    @GrapeWizard667 Před 2 lety

    Thank you for the upload. You've been a great help!

  • @MariG-uc1rw
    @MariG-uc1rw Před rokem

    Thank you! Tape is the way to go to hinge I applied mine perfectly for the first time ever, proud moment! The little things. Thanks again!

  • @Bulldogandtea
    @Bulldogandtea Před rokem +1

    Brilliant, thank you very much! 🙂

  • @lenkabrnova8258
    @lenkabrnova8258 Před 2 lety

    Awesome video, screen protector now on phone without bubbles, really practical tips, thanks

  • @CombatCoulture
    @CombatCoulture Před rokem

    Thank you for the video, this method has worked the best for me...

  • @deepali222
    @deepali222 Před 15 dny

    Helpful, thankyou.

  • @marthakamara8870
    @marthakamara8870 Před 8 měsíci

    This is the easiest method so far.
    Thanks 😊

  • @ChaniiStyles
    @ChaniiStyles Před rokem +3

    This technique worked perfectly. I used to try to go from the bottom up but the hinge method is much better!!! I got absolutely no bubbles! Thanks for being so thorough

  • @deborahelizabethshedd6262
    @deborahelizabethshedd6262 Před 3 měsíci

    Thank you for video..helped me so much 😊😊😊

  • @BruceNewhouse
    @BruceNewhouse Před rokem

    Thank you. Nice teaching style.

  • @bellgaming4001
    @bellgaming4001 Před rokem

    Thank you soo much man ur the best

  • @Runstr8t1
    @Runstr8t1 Před 8 dny

    Thanks this was so helpful

  • @bobbycole3968
    @bobbycole3968 Před rokem

    This method works great, it would be hard to foul up, installed mine with no problems at all...Thanks good video.

  • @jessieconnelly9716
    @jessieconnelly9716 Před 2 lety +1

    Made installing my screen protector so easy thank you so much

  • @chapioliva
    @chapioliva Před 2 lety

    Great video to follow, many thanks!

  • @mi2maui
    @mi2maui Před rokem

    I went to APPLE store yesterday and asked for help putting my new protector on thinking since I spend $$$$$ there they would be helpful. NAH! You have to overpay for a protector for them to help!!! So here I am, thanks this is very helpful. I feel like your steps provide the safety net I need to be brave!!! Do you have a video on taking off the old screen?

  • @marieerby5060
    @marieerby5060 Před 2 lety

    Very Helpful Video!! Thank You!!

  • @lilaloves
    @lilaloves Před 2 lety

    Great video, thanks for the hinge with tape idea.