Great job in showing the complete install of this BBK! @6:32, the video showed torque as lbs/ft which is incorrect !! Torque is always expressed with a hyphen (-) and not a slash (/). When you express it with a (/), it litterally means 12lbs per ft which is meaningless and not a measurement of torque. 12lbs-ft means the force of 12lbs applied at a distance of 1ft for the lever arm. Writing it another way 12 ft-lbs is the same - a lever arm of 12 ft with a force of 1 lb applied and is equivalent so you can express torque with both methods.
What is the min wheel size & specs(offset & backspacing) Will you be doing a stopping step to show how much better they perform? Brembo also makes an 8 piston for this truck is this only for monster tire sizes? Thanks great vid!
Hey Mike, that's a really tough question to answer because there are so many variables in Wheels. These could work with one version of an 18" wheel just fine, but then not work with another 19" because the spoke design, offset, and barrel design can be so different. So, essentially, you need to evaluate each wheel. Brembo supplies "crossections" of their brake kits to help you understand the exact dimensions, then you can use that on a physical wheel, or you can sometimes send the crosssection to a wheel manufacturer and they can confirm whether or not it'll work. In this case, these wheels are Venom Rex VR601 in "Desert Bronze", 20"x9" with an ET 12 offset (-12mm), and they cleared the brakes just fine. Regarding the 8-piston kit, we talked to them about that a little bit, and basically, there's a lot of modifications that have to happen to make those brakes work with any wheels. We didn't dive into it, but sounded like relocation kits, and fabrication, and we just weren't looking to do all that. Thanks for asking let us know if we can help with anything else.
@@Motoroso thank you very much for taking the time to reply, great feedback, I hope you do a performance demo video! Would be great to see 5K worth of brakes in action!
Hey Andrew! Yeah, and the video barely does them justice, they look so good in person! Seems a little flashy, but then you see them, and it's just classy! The wheels are Venom Rex VR601 in "Desert Bronze", 20"x9" with an ET 12 offset (-12mm). We are a Venom Rex dealer, we'd love to help get you set up with a set. Venom Rex also makes a VR602 for the Gen 2 Raptor fitment. Let us know if we can help out, can visit us at Motoroso.com, live chat, or call us toll free at 1.833.MOTOROSO (1.833.668.6767)
Great job in showing the complete install of this BBK!
@6:32, the video showed torque as lbs/ft which is incorrect !! Torque is always expressed with a hyphen (-) and not a slash (/). When you express it with a (/), it litterally means 12lbs per ft which is meaningless and not a measurement of torque. 12lbs-ft means the force of 12lbs applied at a distance of 1ft for the lever arm. Writing it another way 12 ft-lbs is the same - a lever arm of 12 ft with a force of 1 lb applied and is equivalent so you can express torque with both methods.
What is the min wheel size & specs(offset & backspacing) Will you be doing a stopping step to show how much better they perform? Brembo also makes an 8 piston for this truck is this only for monster tire sizes? Thanks great vid!
Hey Mike, that's a really tough question to answer because there are so many variables in Wheels. These could work with one version of an 18" wheel just fine, but then not work with another 19" because the spoke design, offset, and barrel design can be so different. So, essentially, you need to evaluate each wheel. Brembo supplies "crossections" of their brake kits to help you understand the exact dimensions, then you can use that on a physical wheel, or you can sometimes send the crosssection to a wheel manufacturer and they can confirm whether or not it'll work. In this case, these wheels are Venom Rex VR601 in "Desert Bronze", 20"x9" with an ET 12 offset (-12mm), and they cleared the brakes just fine. Regarding the 8-piston kit, we talked to them about that a little bit, and basically, there's a lot of modifications that have to happen to make those brakes work with any wheels. We didn't dive into it, but sounded like relocation kits, and fabrication, and we just weren't looking to do all that. Thanks for asking let us know if we can help with anything else.
@@Motoroso thank you very much for taking the time to reply, great feedback, I hope you do a performance demo video! Would be great to see 5K worth of brakes in action!
Will these fit onto the 2023 Ranger Raptor?
Sir, sorry for asking,, do we need put some grease on brake pad sides or back pad sides? thank before
what are the specs on those rims and tires? I think you've made me love bronze
Hey Andrew! Yeah, and the video barely does them justice, they look so good in person! Seems a little flashy, but then you see them, and it's just classy! The wheels are Venom Rex VR601 in "Desert Bronze", 20"x9" with an ET 12 offset (-12mm). We are a Venom Rex dealer, we'd love to help get you set up with a set. Venom Rex also makes a VR602 for the Gen 2 Raptor fitment. Let us know if we can help out, can visit us at Motoroso.com, live chat, or call us toll free at 1.833.MOTOROSO (1.833.668.6767)
i just want to know if those fender flares and hood are real carbon fiber or wrapped? if wrapped where can i find that vinyl?
Real
Anderson composites
bullshit u didnt share the proces of installing and bleeding procceses...
$$$$$$$$$$$$$$