Extruder calibration on geeetech i3 pro b 3D printer
Vložit
- čas přidán 18. 03. 2017
- With this simple calibration your print's will be much better quality.
i forgot mentioned, after you set the step/mm save changes in the menu.
Audio:
No Win 1:40 Silent Partner - Věda a technologie
Super useful information. Just got my Geeetech and now I'm trying to get it to print as perfectly as possible.
I'm 90% there I think this will take me to 100%
Thanks for your sharing, tintek. Best wishes!!
hey! nice videos! I love this printer with some tweaks...
can you share the design of the mount for the radial fan and the sensor? It's being impossible to me to fit the blower fan and the calibration sensor around the extruder... thx!
I'm running a i3 pro b and Ive had to replace my thermistor again... anychance you remember the voltage I can't remember and none of the manuals specify it... driving me nuts I should remember Ive replaced them so many times!
thanks bro, you are the best
thanks, and don't forget to save the changes
Hi i have geetech too (ctc i3 pro b) with GT2560, but when I overwrite the values in the control setting, I turn off the printer and turn on so I have original, default values, do not you know why?? the printer does not save anything, thanks 4 tips!
ulfrask hy, i forgot to mention, you must save before reset the printer, when you set steps per mm go back and find lower on the menu options to save parameters.
✨
m ha funcionado despues de 4 dias buscando informacion, t como la polla. te quiero t lo juro
Hola disculpa es el único comentario en español, porque mueve de 92 a 100?? De dónde saco ese cálculo?? Grácias
@@JUEGOSMISTERIOSOS447 fíjate que hay un vídeo de calibración de impresora, es un calculo que ahora estoy con el móvil y tengo que revisar, pero es una relación entre lo que pediste y lo que salio Realmente. necesitas un calibre
pensé que era lo que faltó extruir xD no tengo calibre, me servirá un cm de costurera?
@@NekosHandmade q dices lila
@@jgarciamk462 perdón, le hablaba a Bruno
I have never been able to get the 3mm filament to enter into my machine.
I'm pretty new to this myself, but from what Ive seen, these prusa i3's (including mine) take 1.75mm filaments.
when I want to extrude 100 mm the nozzle don't even do anything please can you helpe me ?? did I need to disconect the printer from repetier host ??
I found the problem but eaven when I changed what you said I still have some problems with underextrusion
Mathcraft don,t forget to save after make changes.
okay but how can I save because when I restart my printer I don't have the setting that I wrote so how can I saved them definitely ??
and alson I have a big problem with my extruder. Sometimes in the middle of the impression the extruder stop working and start to cool themself (but it's still rite /220 but I don't know where does this problem come from
Mathcraft search into menu for save option. For other problem don't know try to reinstall arduino merlin firmware.
WOW all of this seems so complicated for me I haave exactly the same model then you so normally I wouldn't have this broblems ifyou haden't got it
You had your encoder reversed. It can be reversed back in firmware but you probably fixed it by now. ;)
Rubafix989 no i didn't and always think why is it so, but till now it's normal ;-)
You forgot to save the setting after.
It's true, good eye ;-) that's why iention that somewhere into coment or deacription i don't remember exactly. Thanks.
tell people to save to memory too ;)
Bass Blom i remember that minute after uploading the vid. thanks
Hello,
i buy a geeetech prusa i3 pro b from ebay and i don't know what software i use and need drivers?
If someone can help me.....
Thanks in advance!
Xristos K if you bought on ebay you propobly got an email with all the drivers and software you need.
just read the manualy and you will understand all about software what you need how to setup and how to work with. if you don't got that email tell me email and i will resend you.
Thank you so much! I received in 5-6 days and if i don't understand i send you! Have a nice day!
tintek33 Hello,
I assembly my printer but I have a problem. The extruder does not take the filament down. The printer start printing but I haven't filament on my bed. The motor of extruder move down up, down up a little piece.
Can u help me?