The Charlie Show /// Episode 203 /// AXE R2 complete setup
Vložit
- čas přidán 7. 09. 2024
- From the box to ready to drive The AXE R2 combo gets a run down of everything. Soldering, Firmware Update, Calibration, Testing, and Programming Features.
This video should cover all the topics for setting up and installing your Axe R2 Combo.
Need the App? In your Device App Store, Search for "HW Link V2".
"Servo Test Video" - If your calibration, won't work, please check this video:
• The Charlie Show /// E...
Axe R2 info:
www.hobbywingd...
HOBBYWING Official CZcams
+++++ Cars & Trucks +++++
Xerun series (Professional grade)
Ezrun series (RTR / MAX upgrade)
QuicRun (starters)
+++++ Helicopters & Airplanes +++++
Platinum Series
Flyfun Series
Skywalker Series
+++++ DRONE +++++
XRotor Pro Series (Pro.Filming /industrial, Gov. research)
XRotor FPV "M" Series (FPV Racing)
XRotor Series
+++++ Marine +++++
SEAKING Pro Series (Speed racing)
SEAKING Series (Marine)
Our mission: Help create memorable moments worldwide.
HOBBYWING Factory: www.Hobbywing.com
HOBBYWING North America: www.HobbywingDirect.com
Hobbywing
Hobbywing_
Copyright & Trademark
HOBBYWING is a registered trademark of Hobbywing technology.
#HOBBYWING #NerdTheNewCool #HDUB - Jak na to + styl
Great video I’m a virgin to soldering and was very helpful and detailed thanks
Just installed the 3300kv into a Gatekeeper. Really excellent system for crawlers, best drag brake out there.
Yes.
Great video ! Mine arrives on friday for my SCX10 iii Gladiator
3300 baby !
Great combo, have this on my trx-4 defender :)
Upgraded my Gen8 Axe with an R2 540L 2800, Great upgrade. Planning on upgrading the Spektrum system in the RYFT with the R2 550 3300KV. Not impressed with the RYFT power train.
What did you do with the original setup?
🤘
Very cool New AXE setup. I have the one from Redcat Gen8 Axe edition. This one has some cool new features and upgrades👍
You think Hobbywing will maybe do firmware update to XR10 Pro for drag racing? Example stages of power
Thank you 👍✌️
We are always working on updates, and should have some very good tools for drag racing. No ETA at this time.
To get faster answers, feel free to email us directly - NorthAmerica@hobbywing.com
Just wanted to make sure on the 540 that if I run the bec at 7.4v the fan will be fine running at the higher speed.
Hey ! I used the 2800 kv one but it has a very bad slow mode 😤 I also had the fusion 1800 kv and it is so much smoother in start and very slow driving 🤷♂️
I just installed the 2300kv,had the fusion before...the fusion was better controllable but it kinda jerked in low not that smooth...I need to turn down the power on the transmitter, it kind of working...not yet figured everything out
Hi there.
I'm having issues with my axe system I got to put in my Phoenix build.
Quick question what Is your esc and motor temp normally run at.
I seem to get to over 40 degrees pretty fast.
Is that normal.
The motor rotation isn’t changing for me :( in the Bluetooth app. I’ll go from cw to ccw and nothing
Did the update pairing the motor but the green light stay bling no red light to say its done
Can you set up multiple different profiles for the parameters? Say if I use a truck for two different things; crawling and bashing. Can i have two different saved parameter settings so i can easily switch between them without having to individually change each parameter?
Great video, question for a 14lbs TRX6 rig, what AXR R2 combo would you sugest ?? I have single speed tranny, so spped is not my concern. Thank you !!!
hello just instaled my axe system with1400 kv motor when is not use is making tiking sound and gentle vibrate (almost like coging but not moving the wheels) I set my endpoint do this is normal ??
thx for the video helped me a lot i got worry at i dont get my axe work whit 2300kv motor and was my first time ever lol needed do that calibration diferently than in this video whit mine axe 1,1 when you got it forward on video i did go backwards and when did you go backwards i did go forward so now it goes how it should on my crawler but its alot faster when i go backwards whit it idk why
Could I put my axe r2 system in my traxxas 4tec if I turn off the crawler specific settings off or to a minimum?
What temp range do you normally have your soldering iron at for the 60/40 type solder?
750-850F usually works well.
To get faster answers, feel free to email us directly - NorthAmerica@hobbywing.com
I seem to have a faulty system, bought brand new, followed every step in this guide, although I know how to set them up anyway, figured I'd try and copy your settings and such and it's so jerky, it's like the FOC is set to super high all the time, even when it's low.
Is their a way to turn the FOC completely off so I can test it?
Like, I come up to a small stone or tree root or something and it hits to about half throttle and jumps over, my tx/rx are fine and have worked in another rig.
Very strange behaviour.
Okay, so I got ahold of a set in 1400kv for a Globe Liner, because This Has The _Oomf_ and the Yokomo I bought from the (now defunct) R/C store is actually a drift car motor.
Since I started messing with the racing motor, there's one thing I can't see on the Axe motors.
I can't see any information in the manual or on the can itself about adjusting the end cap to put mechanical advanced timing on the motor.
Is physical timing advance a thing I'll need to mess with?
(Please say no)
The Axe motors are for Crawling, and "do not" have any adjustable motor endbell timing at all.
Idk why..but I can’t see any drop down profile selection in the latest app version.
Will this fit on the Vanquish Phoenix Portal?
If I don’t pair them will it still work? Mine still works just my slow crawl is now the slowest.
Pairing should be done if there are any basic operational issues. May work "okay", but could work "better" if that makes any sense.
soder?? What does it actually say on your roll .. i beleive it has a L in there....
Hi friends. I have buy combo axe R2 2800kv 540 motor. But I have an issue, to connect the Bluetooth program. They didn't find Xerun device on app HW Link V2. But my phone Samsung A51s they working normally to other devices. Some one can help me? Appreciate
the 550 axe set up dose it come with pinion gear as its a 5 mm shaft ? can you get back to me befor i bye it ?
It does not.
To get faster answers, feel free to email us directly - NorthAmerica@hobbywing.com
Do they still make the normal 540? If not will the 540L fit in a VS 410?
It was discontinued.
To get faster answers, feel free to email us directly - NorthAmerica@hobbywing.com
Sodder...roflmao, why can't Americans pronounce it properly with the L in it???
It's solder, not sodder 🤣🤣🤣🤣🤣
🤘