HOW TO CHANGE MERCEDES BENZ M276 CAM ADJUSTER AND CAMSHAFT PHASER
Vložit
- čas přidán 9. 09. 2024
- HOW TO CHANGE MERCEDES BENZ M276 CAM ADJUSTER AND CAMSHAFT PHASER
奔驰一旦冷启动正时凸轮轴调节器响,一定要及时确诊更换,拖久了就是换凸轮轴,甚至正时链条拉长!
#MERCEDESBENZM276
#MERCEDESbenz
#BENZ
#CAMadjuster
#CAM
#CAMSHAFT
#CAMSHAFTphaser
#凸轮轴调节器
#凸轮轴
#奔驰
如果喜欢我影片
请订阅我频道
请留言
请评论
收集更多资讯修车
让我带更多资讯给大家参考参考
如版权问题请联络我 我将会彻底删除影片
email :newtwo020@gmail.com
铝螺丝居然没有更换还用原来的,牛了
Why did you have to change both the camshaft and the camshaft adjuster instead of just changing the adjuster? Thank you for making this video
3:11 to 3:17. There's clearly a misalignment along the camshaft with the ledge on which the adjuster seats. Could cause a persistent timing issue.
@@questions703those are pressed on, and I've read of someone fixing one that was off with a pry bar to spin it back into place.
Can I ask why the camshaft was changed?
Probably rattle at start up
@@questions703 That would be the adjuster/phaser not the entire camshaft.
@@bm-rf4bc yea, I didn't read through the question properly. There was clearly a misalignment along the camshaft on the ledge where the adjuster sits.
And it's likely to cause a timing discrepancy.
@@questions703 All good. I just wanted to clarify.
It’s not a M276 engine
I also do not think this is the M276 engine!!! Look different than my SLK350 M276 engine...
This is M276.. Its from 3.0, and not a 3.5. Seen in E400, C400 and so on.
Bruh 😂 of course its a276
4:02 Too much sealant!!!