THANK YOU SO MUCH for this video! I couldn't find out how to clear that 103 Long Range Radio error code after I discontinued my monitoring with ADT. You explained it so clearly and showed the sequence of buttons to enter. I truly appreciate you help. I had searched so many web sites and videos before finally finding yours. Great job!
Hey I know this video is 6 years old but thanks a lot. You helped me find the manual which helped me fix a couple of minor problems. You are correct about when I first got my adt alarm a while back they did things for free. Now they charge you for every little thing. It really is too bad. But thanks again for the help.
Thank you very much. I had that long range error forever, but didn't know about your video then. This could have save me a ton of headache. I now need to do some other tasks and definitely your video comes in handy.
Hello , I wanted to let you know that ADEMCO Honeywell uses these panels. The installer code default for them and then they mass manufacture for ADT. ADT has the installer code manufactured for their installers to know. The Programming manual that you are looking at at the video is a generic programming guide for the LYNX Touch and that is the reason for the different codes.
Thanks for making the video. One slight difference my unit looks just like yours, but to re-program the user code I onl;y had to enter the new code once not twice. 6321 802 nnnn. II took me awhile to figure it out because I would get 3 beeps while key it the second time.
Awesome video! I somewhat have the same panel but was removed by another security company, now im trying to find out what ports for the power to the panel go into. Theres a big wire with 4 little wires in it... red/yellow are twined together and black and blue are together. Theres 11 ports where i can screw them into but not sure which..?
Good afternoon, PME. Great video on how to program the ADT Lynx Quick Connect Alarm Keypad. One question. How do I turn the keypad light on and keep it on ?
Hey PME, Great video. Learned a lot and printed off the manual for my reading. One question I have is can you set this system up to call/text my phone number so I can self monitor it? I learned just enough to get into trouble. LOL Please let me know if this is doable and how it can be done. Thanx a lot and looking forward to more vids!
FC is Failed Communication, the alarm is trying to call ADT and not getting anywhere. I'm assuming then your system is not being monitored. Somewhere in the video I physically disconnect the wireless cell phone unit, but you can also try [installer code] + 8 + 00, *41* *42*, exit programming with *99
Thank you very much for the video, I learned alot, however I was wondering if you new how to add a new key fab for the system. Mine recently broke, and I don't subscribe to them.
any suggestion on disconnecting the monthly test? every month the unit beeps until silenced, trying to connect to adt and it can't i'm assuming, the unit is not monitored and would love to shut this monthly beeping off.
Oh, by the way. I was following to your instruction and it didn't work. Finally I realized that you said pound (#) but you meant *. Any way I got the 103 Check LngRng error resolved.
on my app it says no cellular connection but nothing on my wall unit (I have this same one) how do I get that to connect back or is it just my app? I can't find anything about it except for people with the wireless box which I don't have.
How do you clear the memory display? I have false message and I need to clear it. I checked the manual and it says in section Memory of Alarm: To clear the display, note the zone number displayed and enter an OFF sequence ( Enter your security code and press the OFF key). I followed the instructions and nothing happened. Could you help me Sir please and thank you 🙏??
Te installer code is wrong in the manual because all ADT branded systems have it set to 6321 by default, but all others have it set to 4112 by default.
I have the same system. When I set the alarm I can exit out the front door but when I exit out the garage door to get into my car the alarm triggers. Solution?
Thats a bad alarm; let me explain. Well first of all the brains are all in the system. This is bad because if somebody breaks in through the front door, they can smash the alarm and the monitoring center won't be dispatched. The way to solve this would be getting crash and smash protection by the monitoring or having the motherboard in a closet, utility or garage. Having a radio backup is good too.
THANK YOU SO MUCH for this video! I couldn't find out how to clear that 103 Long Range Radio error code after I discontinued my monitoring with ADT. You explained it so clearly and showed the sequence of buttons to enter. I truly appreciate you help. I had searched so many web sites and videos before finally finding yours. Great job!
Hey I know this video is 6 years old but thanks a lot. You helped me find the manual which helped me fix a couple of minor problems. You are correct about when I first got my adt alarm a while back they did things for free. Now they charge you for every little thing. It really is too bad. But thanks again for the help.
Thank you. Bought a new house. Was able to reset my code and clear 103.
Thank you very much. I had that long range error forever, but didn't know about your video then. This could have save me a ton of headache. I now need to do some other tasks and definitely your video comes in handy.
Thanks for the 103 Check Radio error bypass guidance.
Thanks for the info.....now my keypad light can stay on constantly.
Hello , I wanted to let you know that ADEMCO Honeywell uses these panels. The installer code default for them and then they mass manufacture for ADT. ADT has the installer code manufactured for their installers to know. The Programming manual that you are looking at at the video is a generic programming guide for the LYNX Touch and that is the reason for the different codes.
Thanks for making the video. One slight difference my unit looks just like yours, but to re-program the user code I onl;y had to enter the new code once not twice. 6321 802 nnnn.
II took me awhile to figure it out because I would get 3 beeps while key it the second time.
Good help. But how do i get the sound back when i open my doors or window. They are registered but wont sound the voice when i open them
Awesome video! I somewhat have the same panel but was removed by another security company, now im trying to find out what ports for the power to the panel go into. Theres a big wire with 4 little wires in it... red/yellow are twined together and black and blue are together. Theres 11 ports where i can screw them into but not sure which..?
Good afternoon, PME. Great video on how to program the ADT Lynx Quick Connect Alarm Keypad. One question. How do I turn the keypad light on and keep it on ?
installer code and get into programming. *22 and make it a 0
Hey PME, Great video. Learned a lot and printed off the manual for my reading. One question I have is can you set this system up to call/text my phone number so I can self monitor it? I learned just enough to get into trouble. LOL
Please let me know if this is doable and how it can be done. Thanx a lot and looking forward to more vids!
My Quick Connect Keypad Is Displaying No AC When I have AC power connected?
So I tested out the alarm after I opened the door it goes off, i disarm, but now it doesn't allow me to arm again. It just shows the faults
FC is Failed Communication, the alarm is trying to call ADT and not getting anywhere. I'm assuming then your system is not being monitored. Somewhere in the video I physically disconnect the wireless cell phone unit, but you can also try [installer code] + 8 + 00, *41* *42*, exit programming with *99
Thank you very much for the video, I learned alot, however I was wondering if you new how to add a new key fab for the system. Mine recently broke, and I don't subscribe to them.
any suggestion on disconnecting the monthly test? every month the unit beeps until silenced, trying to connect to adt and it can't i'm assuming, the unit is not monitored and would love to shut this monthly beeping off.
Oh, by the way. I was following to your instruction and it didn't work. Finally I realized that you said pound (#) but you meant *. Any way I got the 103 Check LngRng error resolved.
The 9/09 is showing that this manual was updated in September of 2009.
on my app it says no cellular connection but nothing on my wall unit (I have this same one) how do I get that to connect back or is it just my app? I can't find anything about it except for people with the wireless box which I don't have.
How do you clear the memory display?
I have false message and I need to clear it. I checked the manual and it says in section Memory of Alarm: To clear the display, note the zone number displayed and enter an OFF sequence ( Enter your security code and press the OFF key).
I followed the instructions and nothing happened. Could you help me Sir please and thank you 🙏??
How do I go by adding another keypad upstairs. I have. 5828v I want to install
I still remember my code but the all sensors are disconnected. I cannot connect the sensors to the system. Please help.
What kind of cable/wire is the adapter hooked to?
Mosi Hawthorne, I used the same wire the original installer used, it's a generic 3 wire solid strand cable
Can I install an external siren to the ADT QuickConnect?
Frank Barone, yes, please see manual link in video
Te installer code is wrong in the manual because all ADT branded systems have it set to 6321 by default, but all others have it set to 4112 by default.
Thanks for adding that info, guess my installer code is different, just hoping this video can help
You did a really good explanation. I may be getting one of these systems soon and your video really helps.
@@HappyJigg ö ft
Can I program a motion detector myself a 5800pir-res?
Idk, this video may not apply to that system
Yes
I have the same system. When I set the alarm I can exit out the front door but when I exit out the garage door to get into my car the alarm triggers. Solution?
you garage door is not set as an exit entry door that's an easy fix they should be able to walk you through over the phone
How do you do fc code
just moved in to a house and inherited this alarm...how do i find out what the previous owners code was?
Look in the video and use the mentioned installer code, then program the one you want
@@PMEIncServices Thanks so much for the prompt response. I tried this but it didn;t register the new code i inputted :(
Your vid was great btw, in so far as i actually understood it!
Thats a bad alarm; let me explain. Well first of all the brains are all in the system. This is bad because if somebody breaks in through the front door, they can smash the alarm and the monitoring center won't be dispatched. The way to solve this would be getting crash and smash protection by the monitoring or having the motherboard in a closet, utility or garage. Having a radio backup is good too.