2015 Ford focus fog light

Sdílet
Vložit
  • čas přidán 15. 05. 2018
  • How to remove front fog lamp on a 2015 Ford focus

Komentáře • 16

  • @abradley4771
    @abradley4771 Před 2 lety

    Thank you great video!

  • @DATDesign
    @DATDesign Před 5 lety

    Thank you for this! I just replaced both of my fog light bulbs in less than half an hour after trying to squeeze my hand down from the top yesterday. I knew there was a better way!

  • @wilburwilson1034
    @wilburwilson1034 Před 2 lety

    I replace a burnt out fog light bulb this evening on my 2015 Ford Focus. Followed the steps taking care to use a wash cloth to prevent scratching the paint while taking off the black trim piece with the nylon pry tool I bought at Harbor Freight. FYI, the dealer quoted me $400+ to replace the bulb. Said they had to take off the bumper.

  • @Every-picture-tells-a-story

    Thank you James 👍⭐️

  • @mrconta
    @mrconta Před 6 lety +1

    cheers for info

  • @AC-jn6ks
    @AC-jn6ks Před 5 lety

    How did you remove the grille?

  • @nathandavis5770
    @nathandavis5770 Před 5 lety

    Thx

  • @johnlafave6053
    @johnlafave6053 Před 3 lety

    If you wanna do something extra you can get KLM air filter. Take the cover off of old stock filter and leave off. Car sounds meaner. Gets more airflow to engine like it should. Plus 2 hoursepower and 3 to 5 miles extra to gallon since you drive highway. Worth every penny. Average cost 60 bucks

  • @dalewagner7718
    @dalewagner7718 Před 2 lety

    Or you could turn the wheel in, unbolt the inner fender well, reach in and unscrew the lamp socket and replace the bulb and do the reverse to put it back in and you don’t risk breaking the trim!

  • @johnlafave6053
    @johnlafave6053 Před 3 lety +1

    And my 50W led green fog lights are on the way. Haha

  • @litlred412
    @litlred412 Před 5 lety

    I've been watching a lot of these videos about fog light bezels. Having trouble reinstalling bezel. Any tips, please? It's not just a simple reverse order!

    • @jamespfeiffer5402
      @jamespfeiffer5402  Před 5 lety

      Unfortunately most parts on cars are plastic and can need a lot of force to pop them back in. There is a very fine line between between too much force and just enough. Make sure all the tabs are there and no cracks. Sorry I am not more helpful. Good luck

  • @urbina682
    @urbina682 Před 5 lety

    I even took the tire down to change these fog lights

  • @jabmdp03
    @jabmdp03 Před 3 lety

    Thank you can you tell me what is the bulb number?

    • @jamespfeiffer5402
      @jamespfeiffer5402  Před 3 lety +1

      H8 I believe. Any automotive parts place will let you know for sure