Parduc® P40 Profiler Adjusting the hollow radius position ENG

@parduc_sharpeners
This video includes the following topics of P40 profiler & skate sharpener:
6 Parduc P40: Adjusting the hollow radius position.
6.1 If the hollow radius sharpening groove (ROH) is not on the runner's center, it can be adjusted.
6.2 Loosen the fastening bolts on the diamond dresser frame, using a 4mm allen key
6.3 Adjust the diamond unit by rotating the adjusting bolt with 4mm allen key. Adjust only small amount at a time.
6.4 By tightening the bolt, the groove is moving towards the back of the machine. When loosening the bolt, the groove moves towards the operator
6.5 One full turn equals 0.8 millimeter movement on the groove position, so adjust the bolt in small steps.
6.6 Tighten the fastening bolts
6.7 Profile the grinding wheel and perform test sharpening
www.parduc.com