How to Build $3000 Speakers for $500 - Soundstage 15
Vložit
- čas přidán 6. 01. 2021
- How to build a Pa Speaker? A lot of people are asking that, and they should. Take the JBL SRX815, it is close to $3,000 a pair. In this video, How to build a PA speaker, I wonder if I can design and build a similar PA speaker for closer to $500. If I can, that would be an insane value! So come along and watch how to build a PA a speaker, as I show you how I designed it. And see how close I got to my $500 mark.
Soundstage 15 Speaker Plans: toidsdiyaudio.com/product/pa-...
Parts Used:
15" woofer: parts-express.sjv.io/3PnB5A
Compression Tweeter: parts-express.sjv.io/4ebzkG
Waveguide: parts-express.sjv.io/QO9m2a
Port: parts-express.sjv.io/qnQM1n
🔥 Where to Buy Speaker Parts and Kits:
US and Canada: Parts Express: parts-express.sjv.io/jW7oZb get 5% off with code TOID
UK and Abroad: bit.ly/3skOGRJ
Worldwide: Amazon: amzn.to/3aPhKYD
Crutchfield: howl.me/cg5oP9UKd1Z
🏠Get Whole House Audio:
Arylic: bit.ly/2wFUUQ4
🍿Theater Seating
Valencia Theater Seating: bit.ly/3Jbagjm
📄Speaker Plans: toidsdiyaudio.com/shop
🎙️Sound Advice Podcast: anchor.fm/sound-advice8
🎧Buy Audiophile Headphones: howl.me/cg6GDjmAHzS
🆓Get it with Prime - Free for your first 30 days: amzn.to/326cZqe
FREE Audio Books for 30 days from Audible: amzn.to/3a7lBS9
👋Connect with Me:
www.toidsdiyaudio.com/forums
🤝 Support:
Patreon: / 123toid
Disclosure: This channel is viewer-supported. When you buy through links on my site, I may earn an affiliate commission. I only recommend products I would use myself and all opinions expressed here are my own. - Jak na to + styl
Finished mine several weeks ago. They are mainly going to be used for an outdoor theater space, however I was able to do some listening indoors for a few days. They sound amazing. I am amazed with how good the compression drivers sound. Also listening to several tracks of Victor Wooten which is primarily bass guitar, I am in love. I have a cousin that plays bass and have heard many hours of practice. While the sheer output can't match dedicated powered bass towers, the sound is reproduced better than any other tower I have owned. If I ever have the space to rebuild my home theater room, after having several children I had to disassemble the space I was using, I will definitely build a few more. Thanks again Toid.
I appreciate it. I'm glad you're enjoying them!
You have some very excellent designs but there are always questions that need answering. I joined your forum (March 2024) but there's no moderator. You don't reply to questions. Someone else does and that's after a week or longer. If you're going to have a forum, please be there to answer questions. You are after all, charging for your plans, so expect questions. Thanks!
15 months later and both the woofer and compression driver have gone up *fifty percent* in price.
While the wave guide has *doubled* in price.
Holy smokes.
Joe Biden's regime. $$$ Killing the middle class.
As of Jan 7 2024, woofer went from $150 to $200, tweeter from $50 to $80!, and waveguide from $9.73 to $18.98 (Dbl)!!. So from $210 - $300 per speaker or 70% increase ... my salary in 3 years- 6%. I'm sure crossover components and wood supplies have doubled as well; kind of knocks the fun from DIY projects doesn't it? Glad others are getting rich.
@@UltraNuggz I was planning on building this, really love it.. but in Europe these woofers now cost 341.55 Dollars... each... So that would be almost 700 $ just for the woofers... Tweeters are another 100 per piece...makes no sense...
Just calculated that the price of just buying the materials for these, it would be more expensive than a brand new pair of Klipsch RP 8000F II delievered to my door....Just to buy the materials.... This makes no sense....
I came across your channel at the right time, I just started my DIY Audio journey.
Excellent! Feel free to join us on the forum. www.toidsdiyaudio.com/community
Great build, thank you for sharing.
There's something about a large diameter light cone strong motor mid woofer that brings music to life. In the spirit of big beautiful vintage JBL studio monitors, I'm running a DIY 4-way (18", 15", big radial horns and ring/slot tweeters) actively multiamped system with crossover points at 100, 800, and 6k... stunning!
I totally agree, I am running jbl 4345 clones and the large mid is amazing.
@@callmebigpapa too cool! Anywhere I can go to see more details of your project? I'm working on posting mine somewhere, including sound clips if I can get around copyright rules.
Ok, now you need to build the "Soundstage 12". Love these builds Toids.
Thanks for making the vid man. Inspired me. 👍🤘
Always educational watching you builds man... love it. Really looking forward to doing some more diy vs kit builds in the future once I get some more time. Keep up the great work!
Thank you! I appreciate it.
@@Toid Hey brother. What do you say about DIY
1. Danley J5 caleb
2. Danley TH812 SUBWOOFER
3. Mccauley m421 SUBWOOFER
4. Bose MB24 WR SUBWOOFER
Btw, you won a subscriber. Would really appreciate if you look into my requests for possible plans & crossovers.
Note: please use Faital Pro drivers.
Awesome video! I think I'll take you up on this one! Thanks & Cheers!
Awesome! Here's the report from the guy who I built the speakers for: "They're great! Love them! I wasn't an audiophile before but I think I'm turning into one now! Listening to music now is more enjoyable than I thought possible, I can "see" the music now. Karaoke is on a whole new level now too! I love the clarity of the sound they produce, no discomfort to the ears. You don't realize how loud they are until you try to talk to someone because the purity of the sound is so clean."
@@ToidI still haven't gotten around to this project as I'm in a small apartment, but I did score a pair of JBL-L56s for $13.00 buckaroos at a local thrift shop. My question: As the Not Foam rubber like surrounds are intact/completely still there with some minor separation, can I dab a bit of white glue to hold everything in place until I get the kit to refurb properly? It will all be removed anyway... Any advice regarding would be greatly appreciated. Thanks!
Sooo welllll doneee! Love your work, could you please do a classic cerwin vega clone? Something like the at-15, 380se, or d9
Thanks for the knowledge
Thanks for the get back! That would be cool!
Good call on that blue, looks like the big JBL 4343 Studio Monitors back in the 70s
He is really a genius saving us so much money i would love to see his point of view on Concert Speakers or Line Arrays or Studio Monitor loudspeakers similar to ATC or Genelec farfield monitors 🙏🏾 PLEASE
Just found your channel, awesome videos! Subscribed! Have you ever thought of tackling recreating a set of KLIPSCH LaScala? That would be a great build.
I have been considering it. Recently I did the Klipsch KL-650 THX. So maybe the LaScala might be a future option. I've also been considering their cinema series. Designed for commercial theaters
Well done. I also like Parts Express :)
Good on you for doing a 15". It's about the sweet spot woofer size for 'life sized' output at reference levels in a residential environment. Was so glad to NOT see yet another "surprising bass output from such a small driver" design.
Thank you. I will have out a smaller version that should be really good for music and double as a nice surround speaker. It'll use a 10 in woofer and a compression driver.
I've done pretty well using 12" drivers.
@@Toid A bit smaller for on my desktop would be nice. And then I can put 2 in the back too.
Nice! Appreciate the content.
Helpful performance tip; utilize a "window" brace, instead of individual pieces. Significantly better bracing. Plus quieting the cabinet is really key with panel sizes like those... as only slight panel motion creates unwanted output.
Great video !! Build was awesome . Hey @toid Diy Audio , have you ever built a tower speaker like the Polk audio monitor 70 series 2 ? That's a awesome speaker too. What you do is amazing ! Love your work .
WHO love his work???
Nice build👍
Money saving is must in Corona pandamic..nice 👍 creations bro ..a great clone of JBL speaker....I like it very much..love you from India 🇮🇳 proudly
Wow!!! Awsome job!
Thank you so much 😀
Great Video! Loved it!
Glad you enjoyed it!
Nice build...! For outdoor theater use however I'd have probably gone with birch ply, rounded off those edges and cover the whole thing with white duratex dyed to my chosen colour and put on with a fine finish foam roller. And put a mesh screen on the inside end of those vents :-)
Great points!
Nice job. Could you share how much power they handle. And the db output at different power settings. I want to build. My amp has 500 watts. Thanks for sharing this speaker build. Do more. Good stuff.
I agee the price of audio systems is extreme.I realize why, marketing, in store to sell the size, the name brand carriers weight, packaging etc.I think it's wonderful that you can build your designs.Keep up the good work.Just discovered your post.Good luck in your future endeavors.
The prices are not extreme. There's people that have wages, pay taxes, they have insurance etc. The quality is also very good and the fabrication process is long and complicated. Transportation is also a costly part, especially when you need something from abroad or even from another continent.
Yeah they are. And what's sad is you open some of these expensive soeakesa up and they're made like shit
Pro speakers can be Really good for home use.
My current build is a mix of JBL STX825 (wave guide) , JBL MD2 (HF driver) and JBL M2 (LF driver)
:)
Great video!
Like this project a lot. I will probably build it. The link you posted for the woofer takes me to a 7" Esoteric speaker. You may want to check that link.
HI! Your build looks amazing! Do you know if its able to handle high bass Psytrance for partys? I mean i would build an subwoofer too. I want to make partys in small rooms for like 40-100 people. I will probably buy the guide and let the speakers and chassis grow by like 25% to make them a bit more powerfull. I love the build, best regards, Max.
Nick, did you happen to model the volume for a full range box? I'm wondering about extending the cabinet into a tower, and what the low end capability of the Dayton would be. Thanks.
Great job
Hey man, incredible build! Do you think they are suitable for a little home club/dj-booth?
Very interesting build! Do any of you think 50 watts could drive these well?
I’d love to see how these measure to the real ones. Great build
Excellent. I've been eyeballing that woofer since it was first released.
It's a great woofer. I really love it! Very versatile. In fact, I use one in my living room as a dedicated home theater subwoofer. czcams.com/video/7gmD0M0Ui0w/video.html
@@Toid
Very nice. I've been meaning to build some PA subwoofers for quite some time and connect two of them in parallel. And this is the very driver I was considering. So many projects, so little time!
@@firecloud77 I hear that! 😁
Thanks!
Nice job men
Thank you very much. Im ready to build mine. What amp would you recomend for them?
Nice Video !!
Sir, excellent on you for building these! I realize the finish or visual appeal was not your goal with these, however some simple steps will significantly improve the finish.
Use a sanding sealer on all the MDF...2 coats with a brush, sanding in between coats with 320 grit.
Prime with 2 coats, sanding each coat with 320 grit.
If you are not spraying the finish coat of paint, use a foam roller. 3 coats sanding in between with 320 grit.
3 coats of poly, sanding in between with 320 grit.
Its not complicated, just requires some patience. Make them look as good as they sound.
You're right, I think he knew that he would be moving them on and didn't want to spend the time on them. I'm looking at building a CSS Audio kit and want the front panel to be gloss white and the rest in timber veneer. I'll follow your tips. 👍
Hey,good subject! I have been designing/building small British style mini monitors for 25 years.goal: to achieve the incredible midrange/seamlessness/soundstage of the Quad ESL 57's.Succeded! I now have been building/upgrading horn designed types.(Klipsch Belle's Heresy's,JBL Mi 632A's,EV Marquis,etc....) Quality old school drivers ( EV tweeters, compression drivers,with alnico JBL cast frame woofers seems to be a marriage made in heaven!!) I love creating great sound for a fraction of the going price for substandard components.
Hi! love this :)
Is there an advantage of using the horns tweeters with that woofer? Or can I have a similar set up but with Ribbon tweeters instead?
The horn tweets give it quite a few advantages with this particular build. And give it a really wide sound stage while maintaining a very high sensitivity. Which means you don't need to push it very much, which makes it a very dynamic speaker.
In the case of individual speaker wattages, how do you pair speakers as such?
Example being a "60 watt tweeter" and a "300 watt" woofer, let's also say that their sensitivity is 100db each
How do you know if their output will be close etc.. thanks!
Very awesome. May I ask how much was your C&C machine and how much do you sell that flat pack for??🙏🙏
Hey I'm just getting into the whole crossover design and what components do what. What did you use for these?
Best sound 👍🏻
Estupendo proyecto compañero....Pero algunas dudas que tengo....¿no sería interesante hacer una prueba de sonido?.....¿no he visto que haya rellenado el interior del habitáculo de espuma adsorbente acústico?....También creo que para la potencia de ese subwoofer las paredes del recinto no tienen el grosor necesario.....Tampoco he podido ver los filtros o crossover de dicho altavoz......Un saludo cordial compañero.......
My mentor in the high end audio industry told me klipsch uses dirt cheap components but they sound good because they are really really good at engineering
Hi, super nice video, love to see how the thinking process is through this project.
Talking about JBL.......i always LOVED the old 70's and 80's very big JBL HiFi speakers, the 43xx seties with big 15" woofers, remember the deeeep bas (west cost sound) these fantastic speakers coug giv with the big soft 15 woofers.
Any chance that you would try to build a clone of such a vintage JBL studio monitor for hifi?.....
I was always wondering what characterize these highend 12 and 15 inc JBL woofers especially for hifi, and if there are cheaper alternatives to them out there?
Maybe in the future. You never know what I'm going to do next. In fact I don't even know what I'm going to do next. But it definitely sounds like a cool build
@@Toid thanks for the answer...:-), yes, JBL just did some awsome cool speakers back then......the JBL43xx series...15 inch woofers....big horns....and the studio monitor look........i just love it!........but maybe i am just a nostalgig....
Exactly what I was looking for!
Would it alter the sound appreciably to build these as a tower, with the lower portion completely sealed from the upper cabinet?
I noticed that the original uses two triangular ports so that the woofer mounts much lower on the baffle and acts as a crossbrace to boot. Seems like a better way to go, but a bit harder to make without a table saw.
Hey been watching your videos for the past whole year . Can you please make studio monitors like yamaha hs5 or 8 or KRK rokit 5's . Would love to build that .
Would that woofer ring really be enough support? I'm genuinely asking. I understand it's ultimately thicker but still only glued to that thin piece of mdf. Wouldn't making a double baffle be much more rigid? Would lose some internal volume but maybe just add some or account for it with increased port size, so the frequency response says the same? Really great video!
Would it been have possible to buy the same model jbl woofer? Just curious if it’s even possible to get your hands on one. Thanks!
Another good choice for this cabinet would be the Dayton PA380. 👍
Hey I was wondering if you have some diagram or something of the speaker response over the 10 khz? ( Im not sure where does the one in the video go to ). I am interested in using these horns for some home hifi listening with these waveguides and hf drivers, they say it goes up to 20 khz, but I dont know the exact response with this waveguide. And in your opinion does it do a good job of staying clear to the top in both party listening levels and very low levels like midnight listening and such, or would you add an aditional supertweeter to it for everyday cinema and music use (maybe horn or a ribbon one).
Hi. Is there any speaker you would recommend that could keep up with the DIYSG Titan 818? DIY of course.
Interesting please try a similar with midhorn design
Hi Toids, sorry for asking again: What speaker design you designed is best for a Highfi stereo setup? I don’t have room for full movie setup. A subwoofer or bank shacking experience that would be oke 😆
Can you do one with the faital pro 8pr200 and a compression driver with a 1.2-1.3khz crossover ? :P
Really want to build these for sides, backs, and heights.
And a MTM verticle for LCR with the same driver, with an f3 of ~70hz.
Hi Toid's,
What is the best speaker design you have?
1) For a high fidelity stereo setup in my main sitting room (full range sound)
2) For my recreation room, sleeping area and shed
3) A subwoofer, where would you add these and what design would be best (in your humble opinion :-)
I like, will this be a good studio monitor?
Thank you so much!!! I dont have any money to buy ): i am going to build Now thanks to you (:
I was inspired by your project and was looking at using the LAVOCE WAF153.00 which is also a 15 inch woofer but the calculated box volume (in WinISD)comes in at 5.4 cubic foot which is vastly different from your box. Why is it so different or have I got it completely wrong ?
very cool stuff!... go redsox!!!!
Mate, I'm starting to gather components to buy your course and to build this system. What amplifier/receiver will they work with? Tnx!
I'm wondering if you can make hy-end Active Studio Monitors like PMC IB1SAIII or Neuman kh 310, Adam's etc..
thanks for share! this video is a "guide" for refference ! XD !
I have two "empty" boxes of Sony Genezi speakers, I will install in them a new pair of JBL replacing the damaged OEM Sony speakers, still I'm thinking if install JBL or Cerwin Vega,
just the speaker or to install the speaker+tweeter+crossover to have the box complete as "new". of course same Ohms, similar Wattage, and for home audio non demanding.
*Very great video. Would like more of it.* ⭐⭐⭐⭐⭐
I have a JBL 4341Studio monitor. It's also very good.
Hey which plate amp would. you choose for this as an active setup. 800W should not be enough according to the specs of the woofer which already can take 800W RMS alone.
Did you wire the drivers in phase? It looks like the effective roll off of the woofer is close to third order even though electrically second order.
I have a set of GEMSOUND speakers id like to do a very similar upgrade to, but you didnt show the crossover however. The GEMs have an 18"LF, 3x7" MF and an array of 5 supertweeters. I simply want to start with getting a proper 3 way xover in there and a set of horns. Great work BTW, good stuff!
thank you. All the crossover information is in the plans which are linked in the description
Great! Love your work, best channel for DIYers ever! I've been playing with WinSD for vented projects, but I am confused what the port length means when specifying two ports instead of one. Does the figure displayed means that each one of the ports should be of that length, or that the total length of both parts should be this figure? Thanks.
Great question. It means each port should be whatever the figured length is in WinISD. SO if it says 2 ports 3" diameter 12" long. It mean both 3" both need to be 12" long.
Oh man I'd really like to build these they look sweet. The only thing holding me back from ordering the plans is the price of Dayton audio stuff around here (Netherlands). If you take into account the currency conversion it's almost twice as expensive. Eminence however, is almost the same over here. Strange huh?, since I believe they're both manufactured in USA. Anyway keep the vids coming man, awesome as always! Greetings
I ordered the parts for one of these speakers at parts-express USA and even though the shipping costs (to Switzerland) were horrendous, the total price for a single box was around 500 euros.
whats the power output for the speaker ? and what type of amplifier do you need for it?
bass midrange you use is more 3 way speakers. You can use 2 inch drivers but they are not always as good at the brightest frequencies
simply amazing build !!!! 😊 but what about beaming and cone breakup that's common with large woofers in a two way speaker....
The ideal xover point on a speaker like this is where the woofer matches the 90 horizontal dispersion of the waveguide, which is around 1.25khz on a 15" woofer I think, making all frequencies above the xover point uniform in the horizontal plane.
How much do the crossover parts cost approximately ? I am thinking of building these speakers but need to calculate the cost. Would be great if you could give me a clue.
Great work! - Keep the videos coming.
Thank you! And don't worry they will keep coming 😁
Awesome video! I'd love to see a DIY DynAudio Heritage Special type speaker. I'd love to own a pair because they sound amazing but they come at a hefty price point. I'm really interested to see how you would approach such a project.
check out CSS Audio and GR-Research kits
@@tallpaull9367 I've seen them. They have some very good ones.
How about off axis response ? Can it be used as a Hifi System ?
Would the tweeter you used work for a
TR125 pa speaker
1:35 oh hey, made in brazil, didn't expect that
These look impressive, though their power capability and sensitiveity quite high, I wonder how they would perform on a low power 20watt class a amplifier. Any thoughts would be great.
Probably greatly. They're sensitive
Did the tweeter end up wired in the same phase as the woofer or inverted?
Do a video showing your outdoors movie theater!
How do they compare to the JBL 200s?
Dude, u are like a speaker genius Obie 1 Konobi. Can that be interchanged with any Klipsch horn tweeters and speakers as well?
Haha, thank you! Really these are designed to use these specific drivers. I have to say these have the best soundstage out of any speaker that I've designed. In fact any speaker that I've heard for that matter. They are really special speakers for two-channel music listening.
I’ve ordered your plans. What I would really like to build is the Klipsch Cornwall. You could call it the Pornwall, lol. IMHO I think you would sell a tone of Plans. My last build was the Voigt pipe, that turned out amazing. Thank You for your hard work. I’m off to get some more Baltic Birch plywood !!!
Oh man that is an excellent idea. I'll have to look into it. I'd love to see the finished product when you're done. Feel free to email me some pictures or put them on the forum. I'll make sure to repost them on Instagram as well. I love seeing what other people do.
+1000 for this idea!!
Great! Design a Cornwall on steroids!!!
Super inspiring, Thanks for the tips! Not happy with the price and performance of top industry standard speakers, I am interested in building something in between the soundstage 15 and the orange Klipsch 10" 2 way videos you posted. Looking to build some powerful pole mount 12" two way speakers I can use for vinyl performances in smaller venues and at home (pair with a compact 15" sub for the extra low.) Do you have any examples or recommendation for 12" 2 way? Something punchy, clean sounding and not too heavy? looking to get 40-20khrz if possible . Looking at dayton audio odium apollo 12" neo and selenium tweeter. Originally I was looking at archived builds by B&C but very expensive and complicated. Any recommendations would be appreciated. Thank you for these great videos!!
I don’t currently have any recommendations. I am later this year going to design a two way with a 12” that will e similar to the Cornwall. However, that might be more than you’re wanting to spend. I’m guessing around 1k for the pair.
Hi man i have build speaker only ones in my life. Not really successful. I have used 4-chennel car amplifier with 6in. sub (sensitivity < 80) and 2 full range speakers 4'" 91db. sensitivity each (100-20kHz). But i got a problem LF and HF drivers didn't play in compliance. I could arrange them by amp gains but they still was playing with different loudness on different volume. Why did it happen?
I appreciate your build videos that model high end products. It provides the budget conscious viewers and diyers with the opportunity to enjoy quality audio. What are your thoughts on build a powered PA system? is there a plate amplifier that would be ideal to go along with components you used for this build?
I made a flip 6 killer for 64 2mwith Dayton audio 30 watt driver @12v
How do these compare to the JBL Partybox 300 that's sold for $400?
Hi so if i build these for Dj-ing/Mobile Dj-ing or PA in rooms of 100-300 people would they do the job? i'm currently doing a Karoake gig where i need a lil more oomf and would love if these could be part of my upgrades along with two dual 18's for Bass and ofcourse more powerful amplifiers.
current setup
Mids n highs: 2x 15 inch mids+two comp tweets with wave guide 360watts RMS each
Sub: single 18 inch 700watt midlevel front loaded subwoofer
Mids n highs amp: 2x385watt RMS@8ohm bridged 8 ohm 1100watts
Lows amp: 1x850watt amplifier Bridged
i only run a Behringer CX2231 crossover(something like that forgot the name)
so please if any input can be shared i would appreciate it.
I am looking for JBL K2 9800 or 9900 plan. Can you clone those speakers? I think there are a ton of people will buy if you can clone those JBL.