Very many were wrecked. I had to kiss my original 98, goodbye last year, one ckynder, developed internal corrosion. I sold it for parts. Now on an 05. Great bike you have there, nice sound.
Was going to buy a Kawasaki 636 from 2005, but after i watching this video. I fell in love with the older R1, the more i watched your clip the more beautiful your bike became. - so after weeks of searching for an R1, i am actually gonna buy one today :-D Regards from Denmark.
Great looking Bike, I ride a 2001 R1, glad to see someone else riding these. still lots of fun. really like the shorty exhaust. I had my fairings and gas tank all line x , so all black now and indestructible.
Very nicely done. She looks classy, not pimped. I too have a mint 2000 and just enjoy looking at her from time to time. By the time I'm 70 she'll be 25 years and eligible for a collector plate... not sure I'll still be able to lift my leg over tho'! ;-)
Nice job man. Very clean. I have a 2001 yamaha R1. No where near as nice. I'm going with coffman's, and jet my carbs very soon. Please post more videos and keep up the good work.
Hey, love the bike! I have the same one and want to put on the same slip on. Was wondering how your exhaust system is set up and what you did to it? How did you remove the catalytic converter and did you put the slip on directly or weld/clamp a pipe first?
Thank you for doing the video. Much appreciated. I have the Coffman as well on my R1 so my question is what would you advise me to do? Leave the baffle on or off? Will it affect the power on the ride if we remove it? Thanks for responding.
I just got a 2000 R1 I love it but it seem like it didn't have the power it should for the year.when I get on the throttle it seems like it takes a second to response any suggestions???
Dustin Daniel really hard to say without having to bike to look at and test ride hope you figure it out by now. could be something to do with the Jets being clogged
I perchased them off ebay from bk-rider and yes they are VORTEX, but i changed the foot pegs out and used M-FACTORY pegs, also found on ebay. I paid $350.00 for the rearsets.
Thanks bro. Make sure if you go with carbon wrap. Buy only 3M product and use the 3 M primer on your edges. Don't make the mistake I did the first time by going cheep with a different brand of wrap. Good luck and take care.
michael memphis im looking to change it out when I bought it it was cheap and just want to get rid of the stock with intentions to get something else thanks for your thoughts.
This is by far the best looking (older) R1 I've seen. I love how you did the custom wrap, everything is perfect. props!
Very many were wrecked. I had to kiss my original 98, goodbye last year, one ckynder, developed internal corrosion. I sold it for parts. Now on an 05. Great bike you have there, nice sound.
Was going to buy a Kawasaki 636 from 2005, but after i watching this video. I fell in love with the older R1, the more i watched your clip the more beautiful your bike became. - so after weeks of searching for an R1, i am actually gonna buy one today :-D
Regards from Denmark.
Did you buy the R1 and if so how do you like it?
Great looking Bike, I ride a 2001 R1, glad to see someone else riding these. still lots of fun. really like the shorty exhaust. I had my fairings and gas tank all line x , so all black now and indestructible.
01 was the last year they used carbs
Elliott Machamer yeah you’re right. My R1 is a 01 & has carbs
Still love this bike best one I owned. Nice custom work looks great!
I wish I was still in Wa. I pay you to redo my 2000 R1, but you have inspired me. BEAUTY BIKE.
Very nicely done. She looks classy, not pimped. I too have a mint 2000 and just enjoy looking at her from time to time. By the time I'm 70 she'll be 25 years and eligible for a collector plate... not sure I'll still be able to lift my leg over tho'! ;-)
Thanks, you should check out my u tube cjanel to view my video of all the changes I have made to this bike. Thanks again and have a good day.
Thats a Sweet Bike! Great job on the build. I love the way those bikes look.
one of the cleanest bikes I have seen on CZcams 👌
I like the tail and the carbon wrap! i have to 2000 r1 and i wanted to update the look a little more.
Excellent work, very good attention to detail. Beautiful bike man. Good job
Very nicely done! Love the CF... Def makes it look more modern.
Thank you..
Hey, share link to store where I can get those carbon fiber covers for York and Speedo and tank... Looks amazing
Nice job man. Very clean. I have a 2001 yamaha R1. No where near as nice. I'm going with coffman's, and jet my carbs very soon. Please post more videos and keep up the good work.
Bike looks great but needs a stock exhaust. The Coffman only sounds good on 600s
2000 01 r1 sound the best
Sexy bike want one. I'm actually looking at a few of them now
dude this thing is SICK!!! i love it
Robert Clayton thanks bro
Hey, love the bike! I have the same one and want to put on the same slip on. Was wondering how your exhaust system is set up and what you did to it? How did you remove the catalytic converter and did you put the slip on directly or weld/clamp a pipe first?
this looks like the best bike in the world man.. i love it...
Hello, thank you. I have made alot of changes to this bike, To check them out, subscribe to my chanel and watch the videos. Take care
Check out my latest mods to this 2000 R1 by subscribing to my chanel. Thanks and enjoy.
Dude that is a bad ass looking bike....even for 2000
yousaiditzero thank you very much
where did you get all the graphics/wraps for this thing? Looks amazing
my first of my favorite bikes
Beautiful bike👌
Great job ! Beautiful bike!
DrifterGoneWild thank you
Carbs are cool I think.
Thank you for doing the video. Much appreciated. I have the Coffman as well on my R1 so my question is what would you advise me to do? Leave the baffle on or off? Will it affect the power on the ride if we remove it? Thanks for responding.
Sexy bike . Sounds awesome.
Amazing 👍🏾💯👍🏾💯👍🏾
love the bike.
Abraham Carrete thank you
very clean good looking R1.but sound litle lean for me
Thanks, Check out my chanel for all the new mods
fucken sick!!!!
i bought a coffman after seeing your vid, only question is is that with or without the baffle ?
I have an older 99 r1 that im restoring any advice
Is that slip on or full exhaust? Any loss of power in low rpms?
Clean
Check out my chanel for the new look
U don't see them because there used in the track
nice bike
MrFameone206 thank you
I just got a 2000 R1 I love it but it seem like it didn't have the power it should for the year.when I get on the throttle it seems like it takes a second to response any suggestions???
Dustin Daniel really hard to say without having to bike to look at and test ride hope you figure it out by now. could be something to do with the Jets being clogged
where you get the paint scheme
Sick bike.Where did you find the carbon decal kit?
No kit, all done free hand using knifless tape and 3M dinoc vinal rap. Thanks for the comment.
is what plug and play?
What website did you buy the gauge cluster CF overlay?
not sure what you are asking, what cover are you talking about?
Bill Henderson the vynal carbon fiber you have on the face plate of your gauge cluster.
Dan Kocek ebay
Hey where did you get the clips for the fairings
they are 1/4 turn D-ring fairing fasteners off of ebay.
+Bill Henderson thanks man
where did you get the rearsets from?? they look like vortex
I perchased them off ebay from bk-rider and yes they are VORTEX, but i changed the foot pegs out and used M-FACTORY pegs, also found on ebay. I paid $350.00 for the rearsets.
ok great. thanks alot Bill i will look into them. there very nice. are they easy to install. do i need power grinder involved
MrCowboy420 There is no modifications needed. They bolt in place.
kool
Do you still have this bike?
Yes, check out my chanel for all the new changes I have made to it.
do you have to jet carb for that exhaust?
you could probably get away with out jetting the carbs. If anything it would probably loose power at the top end if any.
So might as well jet carbs?
That is with no baffle.
Nice clean bike. ...you gave me a idea with the carbon wrap to use on mine.
Thanks bro. Make sure if you go with carbon wrap. Buy only 3M product and use the 3 M primer on your edges. Don't make the mistake I did the first time by going cheep with a different brand of wrap. Good luck and take care.
i got the same muffler sounds like shit. disappointed
michael memphis im looking to change it out when I bought it it was cheap and just want to get rid of the stock with intentions to get something else thanks for your thoughts.
3 years later this comment made me reconsider getting one.
dude this thing is SICK!!! i love it