Hi, do you know if this particular LCD model display can show the voltage and current display when using the battery? I'm not referring to P03 in the setup - but actually when using the bike to gauge the battery juice? I know the M5 can do this - but they seem to have swapped that mono LCD screen to this one, and I have a suspicion that some functions are no longer on this model display compared to their earlier generation.
i have the same display but on a ehora juliet.. could you find them for mine? please
Před 2 měsíci
in option 14 of display, you can pick the max ah the controller has ? or should i put in option 14 display, the amp's from the battery ? that is 52v 20a what do i need to put in the display settings ? what does it do if i put it on 15a and what happens if i put it on 40a ? Greets, jorn
WTF, what do I do to see anything on this video? All I can change on my display is the Pedal Assist Level, the speedometer reading, and the trip. How do I get the book he is scrolling through too fast for me to read?
Can't thank you enough for posting this I love the bike, but it came with literally no instructions whatsoever. I was looking for some instructions on removal of the rear wheel the de-railer and replacement of them. I had to remove the rear wheel to replace the inner tube. Do you know where any of that can be found? Thank you in advance.
nothing..............try getting a hold of Keteles USA, see if they can send some pict's of the setting's off a bike they have....I went back and forth with china about a bad battery I got with it and asked them about the settings. They sent me all those pict's.. they might do it for yours. They also sent me a new battery....It' a good company, I think they'll help you. @@marvlb
Dear Sir. I bought my Engwe e26 electric bike 2 days ago and unfortunately I completely messed up the settings. I can't reset the yl26c display. How can I reset or restore the factory settings? Thank you in advance for your help. Best regards, Gyula
1 pressione e segure os freios dianteiro e traseiro por 10 segundos 2. abra o instrumento e pressione o freio direito por 20 segundos 3. ajuste a engrenagem para 5
P01=003 (back light level) P02=000 (KMH or MPH) P03=048 (voltage) P04=010 (screen timeout 10 minutes) P05=005 (first number = when the motor helps 0 or 1, 5 = levels) P06=29.0 (tire size) P07=086 (? Not sure) P08=100 (speed limit in kmh) P09=000 (0 motor helps immediately when you peddle) P10=002 (0 is pedal assist only, no throttle, 1 is throttle only, 2 is both) P11=001 (sensitivity of peddle assist 1-24, 1 is the highest) P12=005 (intensity of power delivery 1-5, 1 is the most) P13=005 (number of magnets on crank sensor 5,8 or 12) P14=012 (max amp draw of controller) P15=38.0 (under voltage cutoff, 38v vs. 48v) P16=002 (reset ODO, hold mode button and ODO returns to 0) P17 = 00 (cruise control) P18 =01 (walk boost)
I got the 2000w k800 pro and can't get it past 11 mph no matter what I do. Think I have to return the bike. Update. The company helped a lot. the bike is great.
@@georgemichalakis8272turn off, hold on brake lever and turn on. Keep holding brake lever for around 15 seconds. Let go and turn on to Pas5. Sorted 30mph
Hi, do you know if this particular LCD model display can show the voltage and current display when using the battery? I'm not referring to P03 in the setup - but actually when using the bike to gauge the battery juice? I know the M5 can do this - but they seem to have swapped that mono LCD screen to this one, and I have a suspicion that some functions are no longer on this model display compared to their earlier generation.
i have the same display but on a ehora juliet.. could you find them for mine? please
in option 14 of display, you can pick the max ah the controller has ?
or should i put in option 14 display, the amp's from the battery ?
that is 52v 20a
what do i need to put in the display settings ?
what does it do if i put it on 15a and what happens if i put it on 40a ?
Greets, jorn
How can I get a copy of the Display Users Manual?
Different from the K800 pro in case anyone is wondering
WTF, what do I do to see anything on this video? All I can change on my display is the Pedal Assist Level, the speedometer reading, and the trip. How do I get the book he is scrolling through too fast for me to read?
Can't thank you enough for posting this I love the bike, but it came with literally no instructions whatsoever. I was looking for some instructions on removal of the rear wheel the de-railer and replacement of them. I had to remove the rear wheel to replace the inner tube. Do you know where any of that can be found? Thank you in advance.
I have no clue... Thanks for the kind comment and good luck!
You don’t remove the wheel to change the tube, just loosen one side
This is for the 1000W, NOT the AWD Dual Motor 2000W version of the bike, correct? Both are K800, but they are different models entirely.
Yes
I changed the title of the video......didn't know they were different, Thanks!
@@MrSpubby No prob. I have the 2000W and I screwed up the settings. I'm trying to find the default ones myself. Not doing too well.
Did you find any instructions for the 2000 watt? I can’t find anything anywhere!
nothing..............try getting a hold of Keteles USA, see if they can send some pict's of the setting's off a bike they have....I went back and forth with china about a bad battery I got with it and asked them about the settings. They sent me all those pict's.. they might do it for yours. They also sent me a new battery....It' a good company, I think they'll help you. @@marvlb
What color wire is the speed limiter
White
qualcuno ha il catalogo uso compreso computer di bordo per la keteles kf9 ? Ringrazio anticipatamente a chi può girarmelo via email.
Dear Sir. I bought my Engwe e26 electric bike 2 days ago and unfortunately I completely messed up the settings. I can't reset the yl26c display. How can I reset or restore the factory settings? Thank you in advance for your help. Best regards, Gyula
This is a keteles
how do you unlock speed limiter?
I have no idea, I'm just a guy who screwed up the settings , got this from Keteles and thus shared it with all of you.
1 pressione e segure os freios dianteiro e traseiro por 10 segundos
2. abra o instrumento e pressione o freio direito por 20 segundos
3. ajuste a engrenagem para 5
P01=003 (back light level)
P02=000 (KMH or MPH)
P03=048 (voltage)
P04=010 (screen timeout 10 minutes)
P05=005 (first number = when the motor helps 0 or 1, 5 = levels)
P06=29.0 (tire size)
P07=086 (? Not sure)
P08=100 (speed limit in kmh)
P09=000 (0 motor helps immediately when you peddle)
P10=002 (0 is pedal assist only, no throttle, 1 is throttle only, 2 is both)
P11=001 (sensitivity of peddle assist 1-24, 1 is the highest)
P12=005 (intensity of power delivery 1-5, 1 is the most)
P13=005 (number of magnets on crank sensor 5,8 or 12)
P14=012 (max amp draw of controller)
P15=38.0 (under voltage cutoff, 38v vs. 48v)
P16=002 (reset ODO, hold mode button and ODO returns to 0)
P17 = 00 (cruise control)
P18 =01 (walk boost)
@@TheCvp33 These setting seem to be the same for my Keteles K800 DUAL MOTORS. Thanks :)
It's 08p.
I got the 2000w k800 pro and can't get it past 11 mph no matter what I do. Think I have to return the bike. Update. The company helped a lot. the bike is great.
Hello. To unlock the higher settings. hold left brake and m button for computer and turn the ignition key
@@LeeSheran78 hello can you be more specific please ? Step by step ?
@@georgemichalakis8272turn off, hold on brake lever and turn on. Keep holding brake lever for around 15 seconds. Let go and turn on to Pas5. Sorted 30mph