Ridstar Q20 Aftermarket S866 LCD
Vložit
- čas přidán 9. 12. 2023
- In a previous video, I covered the installation. As a follow-up, Here are the P-code settings to have full power. At the end of the video, I have linked the installation for this S866 LCD display.
This is a great video! I like the Q20 design, and it's cool to know there's options for the display.
I got the same contoller because mine quit working like yours. Put new controller on bike drives good but speedo doesn't work and have e10 code. All settings set to same settings you put on your new controller any ideas why same bike as yours
hello, my back tire is flat, can you make a video demonstrating how to fix flat tires on the q20?
It’s the same as any bike
Hi. When I hold down the minus button the wheel moves. But it caps the speed at 6km/h. Is there anyway to adjust this
No, it's factory set in the firmware.
Thanks for the great review. Do you happen to know if the s866 will work with the dual motor q20 pro?
I would think not due to the second motor.
@sagarevstore4524 when im riding at 30km/h for example ... if i stop pushing throtle for a couple of seconds- like when you see a car geting close from ahead temporarily-and after a second or two start to push it again the vehicle jerks badly ....you push the throtle but for the vehicle its like you pushe onto the brakes ..jerks and you have to decrease alot of speed to get acceleration agaon
I got the same display for my ridstar after my display went out too, but the pin colors didn’t line up. It’s the same display in the description you posted. Also, I had to change the wiring to the proper order, then I’m stuck with a e-10 error, lights work, but throttle does nothing. I can’t access p10-p20 either
I wish I could be more help. I do know that the pin colors have to be the same.
As to the error code that you're getting it's a communication error between the controller and the lcd. It tells me that something has occurred in the rewiring that you don't have good communication. That's my best guess from what I understand and my research.
Which brand of s866 did you buy?
does this display come in color screen, not just black and white? thanks in advance
I do not know of a compatible color display for the standard Q20.
@@astroventure2221 thanks a lot. I really appreciate you. Subscribed and love the videos
Do you think there would be a problem running a 52volt with the s866?
I can't find any of this particular LCD that shows 52 volt. I will go through my settings and see if it shows 52 volts as an option.
Mine has a 52v setting
What is maximum speed with this controller?
29-30 mph - weight and tire dependent.
Hi Sir. My q20 is dead after 20 miles.... I think the controller is fried? I guess it is under warrsnty but seems like huge hastle to send back, etc... would you recommend trying to ordet a new controller and swap? Thanks a lot🎉
I assume the LCD display is not powering up? Is the display that is bad and not the controller. Replacing the display with this same one, verify it has the same plug, and the bike will be fixed.
@@Ridstar_Q20 Thanks! Yes I saw another one of your videos and figured it was the display! I ordered one on amazon. Gosh that was a pain to pedal home 😁
This bike sucks to pedal.
@@Ridstar_Q20 especiallu uphill 😆
Yeah my battery wasnt registering and it died i had to pedal for a hr i was struggling and felt like i was going nowhere 😅@@Ridstar_Q20
What's the name of this electric bike ?
Ridstar Q20