What Are The Differences Between The Denon 4800H And 3800H?
Vložit
- čas přidán 5. 09. 2024
- Become a Member of The Daily HiFi Crew
bit.ly/dailyhi...
AFFILIATE LINKS (Use our links if you would like to support our channel)
Crutchfield: howl.me/ckjnFE...
Amazon: amzn.to/3rZcX3U
Best Buy: howl.me/ckjnJ0...
Target: howl.me/ckjnK7...
Disclaimer: This may contain Affiliate links which earn a commission if you purchase using those links. This is at no additional cost to you.
DHF Crew Merch: shop.dailyhifi...
Listen to the audio-only version of this podcast: anchor.fm/daily... Welcome to the Daily HiFi Podcast where we talk all things A/V!
Denon 4800H: www.denon.com/...
Denon 3800H: www.denon.com/...
FOSI Audio: www.fosiaudio.com
What are all the differences in between the two Denons? List them out and include them in your comments! And towards the end Joe Brings up a FOSI amp that has a small amount of wattage, and small foot print, yet he likes it a good bit! How's that factor the SMALL SMALL SMALL amount of wattage difference in the 3800 and 4800?
Join our Aftershow! / dailyhifi
Listen to the audio-only version of this podcast on any podcast service or go to: anchor.fm/daily...
Follow us on Instagram: / dailyhifi
Subscribe to Joe N Tell: / joentell
Subscribe to Techno Dad: / technodad
Subscribe to Youthman: / youthman
Subscribe to Erin's Audio Corner: / erinsaudiocorner
Disclaimer: This may contain Affiliate links which earn a commission if you purchase using those links. This is at no additional cost to you.
This podcast will not go down as one of their best, that's for sure...
Monolith Amps..DDSC HD, AL32 Multichannel Processing, Made in Japan, More Wattage...the 4800H has the same exact build quality as the 6700h but is lacking 2 more power amps and only 11 channels of processing..come on people you guys are supposed to be the experts on youtube 🤦♂️
Yes, very weak review for these guys. I don't know why they bothered. Not sure why nobody has done a serious review testing the two units. Thanks all for the good comments
yes, pretty useless videos of dilettants who don't have a clue and are zero prepared.
The X4800H has better soundquality than the X6700H and a much better video section and supports 4 subwoofers. Nobody needs 13 channels. Auro 3D and the other upmixers cant even use the front wide channels. There is a reason most manufacturers never mention them.
@@Cenkolinobut all of the big names and processors do Auro3D., just up mixing movies that are not in Atmos is a great option, The Wizard of Oz Upmixed sounds so much better than the original.
Better Dac(via clock jitter reducer), Better Processor (32 bit), and yes 4800 is MIJ. It also has Audyssey LFC which is very useful for people in appartments/condo's. The 3800 has a very basic dac/processor.
You guy's miss this detail every time this question comes up. The wattage is the least important spec difference.
is it worth extra $1K+ ?
I dont think so.
Thanks. That's why you're here! We can't possibly know or even remember every spec for every AVR out there.
@@joentell yeah lol, Channa is too busy with AV10.
@@level80888 😂
@@joentell you can bring in the Ripewave Audio guy. He's very knowledgeable in such comparisons
Damn, I came here hoping to make a decision between these 2 receivers and the propeller-heads went all over the place. I got nothing! Ah well…
The component video ports, plus the additional watts, are worth it for me.
Was trying to make a decision between these 2 and really came to no conclusion after watching the video. Thankfully the 4800 went on a sale $200 less than the 3800 which made it a no brainer.
It seems that the just of this video is there isn't much difference and not worth spending more on the 4800. If it's $200 less, then definitely a no brainer.
I went with the 3800. I actually had the 4700, which should be the last model equivalent of the 4800, for awhile but returned it for the 3800.
3800 certainly brought it vs the 4700 as that didn’t have the updated UI and only 1 HDMI 2.1 port. 3800 has 4 independent sub outs and can do the directional 4 sub setup just like the 4800h.
I’m very happy with the 3800h running a 5.1.4 setup paired with a Outlaw 5000x amp.
What I would like to see is a measured comparison between Dirac Live and Audyssey on the 3800h!
Does it matter which AVER you choose if youre planning on using it as a pre amp and getting a dedicated amp for each channel?
4800 is made in Japan and has a monolithic amplifier section. Now my question is, if you’re using external amplification for L,C,R, is there a big difference between nine amp boards vs a single board?
Some more technical details: x4800h has the same amplifier modules as x6700h from the previous line-up. x4700h has two modules (5ch and 4ch). The difference should be in better channel separation but who knows how it incorporates to the overall performance of 4800/6700.
4800 had a third speaker zone. 3800 only has two
@@firstbloood1 No, he means 3800 has MAIN & ZONE 2, whereas 4800 has MAIN & ZONE 2 & ZONE 3 for two extra rooms outside the main room.
I upgraded from 4700 to 4800 for the ability to run 6 atmos channels and additional HDMI 2.1 inputs. Also looking forward to trying out Dirac.
4800 sounds better than 3800 in stereo or direct mode
All seven HDMI inputs are 4K/120Hz (8K/60Hz) on the 4800.
How does it play in stereo? 4800H
Aside from power, would the a more expensive AVR have better processing & upmixing vs the cheap Sony (S series Denon)?
Did anyone measure how many volts RMS the preamp stage is capable of, in case you want to add an external amp? 5 volts RMS is good.
Can you take a single AVR like the 3700/3800/4700/4800 and have 2 HDMI sources from Apple TV 4K and connect it to 2 TVs in different rooms with 1 TV having 5.1 speakers and the other having 2.0 speakers and play different audio/video content on each simultaneously? And if the 2nd tv had 2 pairs of 2.0 speakers could you play the audio on either/both?
so is it the 3800 then?
Youth man, I'm a little perplexed by your comment about the Sony AVRs. You said historically they have been trash. I'm about to pull the trigger on buying the Sony ES 7000. It's a new 13 channel AVR which is what I need. The only Denon option that has 13 channels is three years older and 1300.00 more expensive. Can you tell me what components in the Denon's that make them so price prohibitive. And what 13 channel AVR would you recommend for around 3 grand that would be better?
What did I just watch? Did the title of the video have ANYTHING to do with the content? Sure, perhaps 20s of the video did.
Sorry, but that’s seven minutes of my life. I want back. You guys should have done a little homework instead of the guessing game that went on and resorting to looking what others are saying. I am in the process of shopping for a new AV receiver and looked at the 3800 and 4800 back to back. Aside from the increased wattage and triggers, I believe there are additional I/O’s and the fit and finish of the 4800 is miles ahead with it solid machined aluminum face and drop down door, as well as the two main dials, whereas 3800 feels like really cheap plastic with buttons and dials that feel like they are going to fall apart. I think the stated THD is also lower on the 4800 and i have heard criticism that the 3800 gets a bit “crunchy” or distorted at higher levels. That being said, one of my biggest concerns with Denon, is overheating, as that is why I’m replacing my seven year old model that fried after many instances of shutting down due to heat. I also have another Denon in my main HT that has shut down a number of times from heat issues - and YES, they are both in well ventilated spaces. I have read and heard that this is a fairly common problem with Denon.
This was a hot take meaning we were taking a look at this live on air when it was announced. That's not the same as a review. I don't think we ever claimed it was. - Joe
Add a fan over the top for longevity! The AIRCOM ones seem highly recommended. Why pay to build cooling into the unit when the customer will just upgrade faster if it dies… :/
I also decided on the 8 series for the better HDMI and selectable pre outs. Went with the X4800H based on Amirm’s measurements vs X3800H and because 11 processing channels are perfect room to grow, I’ll just add a $100 Fosi or Topping Class D amp for the fronts once I max out the power channels.
There’s so much bloat and profit in this market, and it’s frankly enabled by channels that don’t do basic research. These guys were just delivering a hot take but it’s one of the only videos comparing these two so it looks pretty bad.
Hmm should I upgrade from my 3700 to the 3800?
Happy Thursday
I think that the x4800h is more metal,2 lbs difference,made in Japan
It has a larger transformer than the 3800 and an aluminum faceplate.
Changed thumbs down to thumbs up due to the good info in the comments section!
Thanks! We don't claim to know all the answers. No one knows everything, and anyone who claims to is just faking it. Our audience is part of our discussions. They often correct us and inform us of things we don't know. That's why we value them/you so much. - Joe
Wtf is a trigger output
It's a 3.5mm jack output that allows devices to communicate to turn on/off together
Affiliate marketers telling me my Sony AN1000 won't power the Polk R700. I just need there affiliate marketed $5,000 AVR and then I'll be good.
The CZcams AV community is incredibly gross.
You guys are uninformed. Sorry but this show is terrible and to attach the word HiFi to it is a crime.
Go ahead and educate us about things you think we missed.
First