Restoring the original PlayStation (PS1) - Vintage Console restoration & repair
Vložit
- čas přidán 17. 08. 2023
- This Original PlayStation was sent to me to be restored and repaired by a subscriber who didn't have any use for it.
I will restore this broken and yellowed PlayStation. The console doesn't read discs, which is a very common and easily fixable issue with these old consoles.
First, I remove 6 security screws from the base to allow me to separate the two halves then once inside I can start to take it apart properly, first, I removed the power switch then the cartridge ejection lever I then removed all the screws from the motherboard and removed it from the lower casing.
During the disassembly, I found the remains of a spider and a spider nest. It's very common I find bugs inside these old devices, I'm, not sure why, maybe they're dark and warm places?
The capacitor was swollen, in all cases, swelling is due to the buildup of internal gases as part of progressing failure mechanisms. A failing electrolytic capacitor typically generates hydrogen gas as the electrolyte solution begins breaking down. This causes a build-up of internal gas pressure which swells the case.
To fix the disc drive I only had to clean the lens. In some cases, the laser has gone old. You can try adjusting the screw I show to give it more life. It increases the voltage going to the laser and if it's adjusted to the highest voltage at the factory the laser would burn out faster.
I then washed the plastics in soapy water to remove all grime and grease in preparation for the next step which was to soak them in Cream Peroxide Developer 40 Volume and UV light for several days to remove the years of yellowing that has taken place, this process is also known as retr0brite.
Restoration & Repair of broken Xbox 360 and Fix the Red Ring of Death
• Restoration & Repair o...
How to remove yellowing from old plastic (retro bright) the BEST method
• Restoration & Repair o...
How to fix cracked plastic
• Restoration & Repair o...
I will show you how to remove the yellowing from vintage plastics with the Retr0bright method.
This video will show you how to make your yellowed SNES look almost new again.
Coat the plastic in hydrogen peroxide to fix discoloration. Hydrogen peroxide works well on plastics that have turned entirely yellow instead of in just one spot. Fill a plastic bag with enough hydrogen peroxide to cover the plastic. Stick the plastic in the bag of hydrogen peroxide and lay it out in direct sunlight. Wait 3-4 hours before rinsing it off with clean water.
You can purchase hydrogen peroxide at a drugstore or big box store.
If you’re treating some sort of plastic mechanism, make sure you remove all the parts that aren’t plastic before putting them into the hydrogen peroxide.
You can also use an old toothbrush to scrub the hydrogen peroxide onto the plastic if desired
Thank you for watching my video!
ASMR relaxation restoration
electrolytic capacitors
The failure of electrolytic capacitors can be hazardous, resulting in an explosion or fire. Bipolar electrolytic capacitors which may be operated with either polarity are also made, using special constructions with two anodes connected in series.
(Retrobrighting)To return the yellow color of the plastic to its true white color
Thanks for watching, I hopy you enjoyed the video!
---------------------------------------------------------------------
SUBSCRIBE ▶▶▶ / restorationeg
---------------------------------------------------------------------
ASMR relaxation restoration
----------------------------------------------
Some of my tools:
----------------------------------------------
Screwdriver:
amzn.to/3hPBOiC
Isopropyl Alcohol 99.9% Electronics Cleaner:
amzn.to/2XvnTHl
Hot Air Gun Kit:
amzn.to/3lJ2SkG
My main camera:
amzn.to/2XHl6er
UV LED Strip Lights
amzn.to/3kXhSMU
Black gloves:
amzn.to/3zo0ZyQ
----------------------------------------------
#gaming
#Playstation2
#resurfacing
#asmrrelaxing
#restoration
#repair
#playstation
#asmr
#tech
asmr no talking
![Using Other Songs for Audio Reference [Audio]](http://i.ytimg.com/vi/heFZ6qQXfDw/mqdefault.jpg)
The PS1 intro....it's so beautiful
Thank you, I really appreciate it.
👍Well done sir. The PS1 is one of the first consoles that I purchased myself. A lot of fun times.
It really is!, thanks for the visit ❤️
Na moral. Esse é o melhor canal do CZcams de restauração. Muito obrigado pelo conteúdo, vida longa e próspera pra ti.
Only long term watchers of restoration eg know that this is a re upload of this restoration
Great job. PS1 was the first console I ever opened, but I just replaced the shell, didn' t fix it because it was functional. I liked the UV light part, and the sabling device, the screwdriver you are using was my first type of screwdriver that I got, I have it as a set and mine is called 'Impacter'. Keep it up.
its always cool to see someone repurposing stuff like this old rock and dead bug collection box. never fails to amaze me the stuff people can make.
Was that a DK oldies sticker? Cause then it makes sense 😂
Beautiful video. Loved watching it ❤️
The strange housing and PCB is the SCPH-1002 model, and sold with the SCPH-7502 sticker 😳
Wonderful job. Congrats.
Thank you very much!
Parabéns!!! Excelente trabalho!
修理できるのは本当に凄いと思います。いつも見てます❤
ありがとうございます、本当に感謝しています。❤️
@@resEGbro casually speaks japanese
14:57 funny, but this is not SCPH-7502 as shown by the sticker. It is SCPH-1002. Cinch connectors, antenne out, and laser it's closer to PSU.
También comenté lo mismo...
Meaning?
Great video. Good job
Отличная реставрация👍👍
Trabalho maravilhoso!
Obrigado eu realmente aprecio isso.
excellent
Good job men
gran video
Thanks for kind words!
We kinda have the same model number but mine is a 7501 model without the av ports. I already fix mine just replace the laser that's it an easy fix. the only issue I hate is the overheating that it has
Eita muito emocionante saindo fumaça do console eu tinha um estragou amo seus vídeos ❤❤❤❤❤❤❤🎉🎉🎉👍👍👍👍tamo junto parceiro
Thanks for the visit
@@resEGeu que agradeço muito
@@resEGvocê tras conteúdo bem bom mesmo
even though I started with Nintendo consoles back in the '80s, PS1 is the console of my childhood.
to espantado é do cara ter conseguido um ótico de ps1 fat novo
One of the most beautiful experience!
Sympa toutes ces restaurations de consoles, je m'abonne! ;-)
good to see it fixable. almost made a joke at start about all the magic smoke coming out and killing it for good. ;)
The Perfection
Bonjour,
Très beau travail comme toujours 😊
Mais j’ai une petite questions qu elle est la crème blanche que tu utilise sur la console car je n arrive pas à voir celle que tu utilise exactement?
Et combien de jours tu le laisse agir car ça fait un très beau travail 😊
Merci bc 😊
Un video davvero molto eccezionale sei stato veramente bravo. Volevo chiederti per togliere ingiallimento delle plastiche cosa bi sogna fare? Ho visto nel video che metti un prodotto, poi avvolto in una pellicola, messo sotto una luce di colore blu, poi con la lucidatrice quale prodotto usare? La lucidatrice che disco mettere?
Ironically, back in 2000 when I had my PS1. I also put a Pikachu sticker on it not knowing it was a Nintendo exclusive IP. I only watch the animated show but I was never a Nintendo fan, just a pure Playstation gamer.
Ps1 nostalgia
Great Video #ASMR
Cool
Thanks for the visit
This looks very fishy, no dirt or dust or lint inside , the parts look very clean, but the outside looks dirty but not, looks like its painted on you can see brush marks , iv watch a few from Restoration EG and they looked genuine ,but this one looks 'fishy'?
I was going to say the same. We can clearly see brush marks all over the console shell and if you take a close look at the memory card slots you realize they aren't dirty at all.
My question is why was it smoking?
@@red-man7017 Because of the blown capacitor. or a smoke bomb strategically placed inside and then filmed ??
Thank you so much! I share this video on facebook
Awesome, thank you! I’m glad you like it.
Dude just took a normal console, wiped his ass with it, then reversed the footage
you fixed the PS1
*WonderGil Vídeo Dear Brother Restoration EG... Nice Repair of Playstation 1 Console!!! Super Big Thumbs Up...* 😎😁😀📱💁🏻♂️📺🎥🎬🎮🕹👨🔧⚒🧤💦💿📼👊✌👍
In my country,when you see electric and smoke run and hide bro. Why didnt you put it away then it started smoking? But awesome restoration keep going maaan 👍💪
I was really wrong about this. Thanks, buddy! Have a great day.
I've never seen smoke coming out of a console before
I’m looking to restore my old ps1 can I use isopropyl alcohol on the motherboard and psu? I just want to make sure I don’t damage anything
Yes, Isopropyl alcohol removes oils, adhesives, fingerprints, soldering flux, and other contaminants, making it ideal for cleaning electronics. However, it is important to note that only alcohol with a grade of 90% or more should be employed on circuit boards and other internal electronics. Commonly, 99% isopropyl alcohol (IPA) is used on electronics for cleaning circuit boards and reworking components (removal of flux). In the US, 91% is common at pharmacies and some use 91%, being careful to dry the board thoroughly, removing any excess water, using canned air or a conditioned air compressor line.
Dispiace un po' per l'adesivo, chissà da quanto tempo era li 😅
that was perfect I had a question, are you Iranian?
Thank you for your answer❤
No, Thanks for the visit❤️
Xbox jasper kronos with internal memory.
It randomly lose power no matter if it was boot into xell or dashboard, with or without DVD/HHD.
Sometime, the fan turned of, no image out, but the yellow power light still on. Push the power button will turned it off and another push will not turn it back on. I needed to unplugged powersupply for about10 seconds and plug it back before it can be turn on.
HDD made more screeching noise when it lose power than when it was shut down properly. What do you think is the problem?
Tried switching between rgh 1.2 rgh 3.0, and high wattage xenon power supply didn’t fix it.
If you could I helped me, I would be very thankful and a jasper will be saved from junkyard. I worked on it for 3 months and out of idea now.
how much alcohol do you clean your ps1 with?
😊😊😊😊👍👍
Thanks for the visit
😊
Ты крутой чувак 🤘🏿🤟🏿🧡🧡🧡🧡😊😊😊
Каждый раз измазаны каким-то "вареньем". Ну не бывает такого, ни разу не видел на барахолках таких ушатанных вещей. Обычно такие консоли могут быть пыльными, но не измазанными непонятно чем в сверху и до низу. Он сам их пачкает, а потом типа отмывает, восстанавливает.
Legal
Bien por la reparación, pero la etiqueta que está debajo de la consola que dice mod.7502; no corresponde a la placa que estás reparando y consola que estás reparando...
probablemente otro video mas de restauraciones falso
Model used: SCPH-7502
😮
AVER GENTE ESTOS VIDEOS PUES SERAN FALSOS O REALES COMO SEA LE AYUDA A PERSONAS QUE NO TIENEN NI IDEA DE DARLE MATENIMIENTO Y LIMPIEZA A SUS CONSOLAS Y VIDEO JUEGOS,AMUCHOS LES SIRVE
¡De todos modos, muchas gracias!
❤❤❤🌹🌹🌹👍👍👍
0:59 OH NAHH
Ты классссс🎉🎉🎉😊
This has a SCOH-7502 sticker. And also why the fake smoke?
I’m still wondering what happened to that Pikachu sticker 🤔
la ps1 del infierno
sometimes, I buy some stuff to restore from the local junk market
czcams.com/video/IQIexee0mJY/video.html
You are a peaceful dude
Do a n64 next if you can
Where do you find these things?? Or you purposefully make them that way?..... NOT CRITIZISING!! Just a simple question!!
Sometimes it's from subscribers, sometimes from ebay. And assuming OP has friends i imagine he gets those from them
sometimes, I buy some stuff to restore from the local junk market
czcams.com/video/IQIexee0mJY/video.html
Thank you for your time. I appreciate it
@@resEGnah, i bet you get normal old consoles, make them run like garbage, and slap some dust on there.
qual o nome deste produto ai
საიდან ჩითავ ამ დისკებს?
Sinto tesão em ver esses videos de restauração
Cause they are fake
Is this a Pikachu sticker on the top of the PS1 in the thumbnail?
I need to restore and repair my Ps1 . How to I Contact You?
PSA: If an electric device starts smoking when you provide electricity, don't knock and push it around for a few seconds like an ape. Pull the fucking plug. ☝
Unfortunately, the surprise made an incorrect reaction , thank you for giving me this information
This is just a replay of a video done a year ago
Copyright danger
La consola de la miniatura es otra
Just a quick question, this one came from Hungary?
really sus that all your consoles are covered with the same type of dirt
Hola
Why did you deliberately add the "dirt" on the outside and small stones on the inside? Just to make for a more obvious transformation? You'll lose credit fast walking down this path. A shame really, because your restauration methods are pretty decent.
sometimes, I buy some stuff to restore at the local junk market
czcams.com/video/IQIexee0mJY/video.html
@@resEGImpossible, you’re trying hard to copy odd tinkering so much that you wanted to go the way of faking. So scummy.
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Thanks for the visit
🇧🇷💯🦾💥
Sony 소니플스1소니오락기상점!
connecting the device before checking it is a great idea 😂
مكانك فين
because why not plug it in caked in 💩and cause more damage?, it's what we dooooo! 😆🔥🔥🔥🔥💨
Entrarão na minha casa e passarão cocô no meu playstation 😭😭😭
Quit playing so much Tony Hawk!
Second
Yikes!
Frist
Thanks for the visit
1:04 Jeez, why don't you just unplug it? 😕 You're still damaging it with power still going through it. Take your sweet time then.
Why do you always gotta use a pirated copy of Tarzan?😂
Why repeat the videos twice ?
In this video, I removed the sponsorship ad, thanks for the visit
@@resEGno one asked. it makes it look like you tried cutting the parts where there was strangely fresh pieces.
pathétique vu l'état de la console
It's not scph-7502 model, it's scph-1002 or 1001. Fake restoration.
Sir pls can u gift this for my kids. Pls
man, just stop trying to be the odd tinkering of fake restorations.
It looks like ur just putting dirt on it an saying it broken just too fix it 😄
That’s exactly what is happening here
Yeah, most of them make it like this!
He should get only negative feedbacks, to troll people, or getting clicks this way!
Exactly, "it looks like"
No one can prove it
Edit: looks like this guy below me just did
Tell me you haven't watched fake restoration videos without telling it...
This PS1 had a faulty capacitor which CANNOT happen by just "putting dirt on it".
This is called "dielectric breakdown". The insulation between the + and - foil plates is cracked
Why you throwing shade on the work that’s gone into this if you don’t like it or think it’s fake don’t bother watching the videos 🤷🏻
clickbait
Sorry, that you dislike it!
@@resEGTHEN JUST STOP FAKING YOU COMMENT PASTE BOT
Easy restoration.i dont like
Fake
So did the original owner swipe the console along his/ her butt crack to create those nice brown bits for you to remove? Just have to ask as I have my PS1 from September 199? when it was first released in the UK and it has absolutely none of these markings or shite on it to this day.