How To Install A Flex Fuel e85 Conversion Kit In Your Car (DIY)
Vložit
- čas přidán 20. 05. 2024
- Learn how to install an eFlexFuel e85 conversion kit aka flex fuel kit in your car. Running on e85 vs gasoline has some benefits like lower fuel prices, more horsepower, and less emissions. It is very simple to install a conversion kit in a compatible car. All you need is to install the flex fuel sensor which goes in-line with the fuel line, then connect some wires to your fuel injectors, and finally plug it all into a piggy-back ECU so it can make adjustments to the fuel injectors. It is that simple to convert your car into a flex fuel car!
e85 Conversion Kit: eflexfuel.com/
Extendable Ratchets: amzn.to/3Yzgrq9
Hose Grip Pliers: amzn.to/3OFLH3j
Hose Cutter: amzn.to/3OGycQL
Fuel Line Removal Tool: amzn.to/3OGyqY7
Multimeter: amzn.to/3YqjsJe
Wire Loom Protector: amzn.to/47f3h5q
00:00 Benefits of running e85
02:27 How to check if your car is compatible with a flex fuel kit
02:48 Tools and products you need
05:48 How to install the ethanol sensor
07:16 How to remove the wiper shroud
13:29 How to rig fuel line connectors
19:47 How to wire fuel injectors for e85
24:43 How to run wires and install E85 ECU
27:54 Starting her up for the first time
29:29 Wiper cowl install
32:20 Filling up with e85
→ As an Amazon Associate I earn from qualifying purchases.
→ Become a ChrisFix Subscriber: czcams.com/users/subscription_c...
→ Instagram: / chrisfixit
→ Facebook: / chrisfix8
→ Website: www.ChrisFixed.com
→ My Channel Home Page: / chrisfix
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing.*
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. - Auta a dopravní prostředky
Hoping to get back on a more regular video schedule after my move is complete. I have a lot of cars and tools so this isnt an easy one haha... Thanks for the continued support and I hope the videos are helpful!
See if your car is compatible: eflexfuel.com/
Extendable Ratchets: amzn.to/3Yzgrq9
Hose Grip Pliers: amzn.to/3OFLH3j
Hose Cutter: amzn.to/3OGycQL
Fuel Line Removal Tool: amzn.to/3OGyqY7
Multimeter: amzn.to/3YqjsJe
Wire Loom Protector: amzn.to/47f3h5q
Don't worry about it, glad your back!
ello
Yay he back 😊😊
@@Flame0_0 ofc he's bck lol
Glad your back
This guy really got sent Soemthing by a company but he didn’t know enough about it yet to recommend it to us so he tested it for years so he knows he’s not going to give us any wrong information or recommend any bad products. Crazy how much effort this guy puts into videos
thats what he said. there is no proof
I think the most shocking thing in this video is the 5 years later Chris not only still has that crappy Del Sol he bought for $300 but, that it still runs well and looks clean.
Looks are deceiving. That car is far from clean which is why I got it for $300 lol. The suspension is good and engine is decent haha. Basically anything I’ve fixed so far is good. The rest is not good
@@chrisfix you had the idea back then to repaint the whole car. Are you still planing that in the future or nah?
No the most shocking thing is realizing that the del sol was over 5 years ago and not last year like you thought you remembered
Had to do a double take when I saw the Del Sol haha shocked he still has it!
@@Nyitemare having a 97 Civic I'm using as a project and will be swapping the whole motor soon, seeing the Del Sol here being used with the E85 kit brought me some positivity to get this kit after the swap.
Hi Chris 3 years ago I buyed my first car for 500$ and I learned how to work on him thanks to you. Two days ago I buyed my dream car Alfa Romeo Giulietta 1.6 jtdm. Thank you so much for all your hard work and fact that you teach us how to do things in our cars..
That's awesome! Thanks a lot!
The real-deal longterm testing on this whole kit is phenomenal.
This is probably the best automotive channel on CZcams. Thank you for all your effort!
I sort of don't get how excessive the long term testing has been given Chris can't fill the E85 in his state on the regular gas stations
@@akrupnovhe literally said he’s been buying bunch of gallons
no doubt about it
THE best.
@@christopherramirez6086 he'll need to, E85 gets considerably less MPG than gasoline.
Your level of safety is off the charts! Very detailed procedures and attention to details
Thank you
@@repentandbelieveinJesusChrist8 jesus got bots now ayo
Your level of doing things correctly is astounding. I’m kind of surprised you didn’t pause to get a degree in engineering to make sure it was engineered correctly. You’re my hero
as someone with an engineering degree, I trust Christ to fix my car than me fixing his bicycle.
I'm floored that it was that easy to convert to e85. Not only did I not know that you could even do that, but the fact it's literally only sensors amazes me. Same gas tank, same injectors, same engine, same everything. Unreal.
Also excellent video, you really make it look easy. Thank you for being the best car channel on CZcams
The amount of planning, researching, filming AND editing that these videos require is out of this world and most have no clue or idea! 👏👏👏🏆🏆💪💪💪
Thanks for being one of the only people that gets it haha
I'm a 100% sure that you have a large part of the evolvement of the level of perfection the car community has these days.
I truly appreciate you and the *ART* you are creating with these videos .
thank god for ChrisFix
chrisfix is goat
Thank you! I love seeing things repaired the right way! That is what it's all about!
nah imma just flex my fuel
Even for people with regular cars ChrisFix has completely changed the way I approach maintenance and repairs to my car. Massive respect.
I love it when you put in 110%. Super detail as i would prefer. Thank you for the videos. I cannot say that enough.
Don’t worry Chris, everyone needs time for certain things. Just glad to get another informational/educational vid from you
I'm 13 but because i watch your vids i diagnosed my dad's toyota Corolla Altis I'm grateful you make vids
Nice work! Glad the videos are helpful!
Been a while.
I know
Fr
3 words, that's all you need to gain lights damn
Been a long long while
@@RpMTarTarwell it's not the word first like pick me first graders or W or 1 or... funniest comments of how long it's been. My favorite is good video when it hasn't even played yet.
Your videos are amazing and the perfection that you put to everything you are doing is outstanding. I love watching your videos, they're so satisfying. Keep going with the good work!
I went from having 4 injectors to 16 injectors. This should be fun... Hope you've been doing good, ChrisFix! I got myself a '19 mustang gt 5.0 and I'm getting ready to do E85 and FBO. Gonna have some fun! And thanks for the informational videos over the years of watching.
Edit: ALWAYS keep a fire extinguisher in handy when working on fuel related anything.
Edit #2: I went from 16 injectors to 10 injectors. I drive an Audi RS3 now
Chris Fix your Awesome! You are one of my best Mentors, thank you so much.
I just did my first oil change on my dads only car, it was a great experience, I bought the tools, and I cleaned the garage and set up my workstation, I am 14 & going to start flipping some cars and know I will learn a LOT!
But luckily your videos will stay along the way and be my mentor while Im working on them.
Thank you again!
Good job. Very good to know how to work on your own car and it will save you a lot of money. More kids need to know at least the basics.
@@philwhite5815 I agree, there are so many things on a car to learn that I can apply to different mechanical machines as well, all I have it do is understand it.
Something you can do is smaller maintenance tasks such as brake pads and maybe fluid flushes (ChrisFix has videos for those too) for people you know like your friends' parents. That can help you save up to buy a car to flip.
That's awesome man! Nice job on your first oil change! That's where it all starts!
@@chrisfix Thank you for acknowledging my comment! See you around!
Trivia: The "cheap car fuel" alternative in most of Europe is LPG, which has similar characteristics as mentioned by you on the E85 (that is, is cheap, has high octane rating which makes it great for high-compression engines, is more environmentally friendly by being made from simpler hydrocarbonates (mostly propane and butane, whereas gasoline is pentan and some higher fractions) but also has a slightly less energy density than classic gasoline which causes slightly higher fuel consumption). It is a gas though, so it needs a separate high-pressure gas tank (usually installed in the trunk or in the place of the spare wheel) and there are no jerry-cans for that, but also is not affected by humidity and tends to mix way better with air (gas/gas vs gas/liquid aerosol), especially at lower ambient temperatures. As for the cost, assuming 3.875 L per 1 US Gallon, and 3.00 PLN as an average price (based on my own observations), 1 US Gallon of LPG would cost ~11.36 PLN, which as of 4th August 2023 is about $2.82.
When I was researching for an idea, Methane, LP, and E85 all had about the same anti-knock rating. For use in a higher compression engine, it came down to availability/cost for the energy potential you needed.
LPG has many issues, the LPG tank takes a lot of space in the trunk, the system is made in a garage and is in 90% of the cases not up to code, engine always goes bad after years of use on LPG due to the nature of the fuel - there is no lubrication as it is literally gas.
@@whogg My father's old car had an LPG system equipped and I remember there being a valve lubrication solution where you would put additional oil to lubricate the valves.
@@whogg There were some particular engines with valve seat problems. Some ford engines tend to have valve seat pitting around the time where LPG conversions were a big thing. And most people with LPG conversions blamed the fuel for it. The problem is normal gasoline driven cars had the same issue but nobody talked about it. It's like the same story with burning battery powered cars today. How many gasoline cars burned down by accident? Many more but nobody cares. But when a BEV burns down oh boy.... the entire world goes crazy. But you are right: There are many "not up to code shtboxes" out there that have been converted in a garage or an unskilled workshop that can be harmful to the engine or a potential hazard at the gas station. This LPG conversion kits that are up to spec have to be carefully set up and tuned to be a real replacement for gasoline. But most workshops don't have the experience with that kind of conversions. So it is better NOT to blame LPG for explosions at gas stations or damaged engines but the people who handle it wrong.
@@whogg valve lubrication is not a big deal on petrol or LPG. Only diesel fuel has enough lubrication properties but diesel fuel is injected directly into cylinders.
I have 2nd gen Prius with LPG conversion installed by me and I drove 95k km just on LPG. Timer in LPG controller showed about 3000 hours on LPG and less than 180 hours on petrol just for preheating, and most of this time is late autumn, winter, early spring time with negative temperature. Maximum preheating time on petrol before switching to LPG is about 10 minutes when Ambien temperature is below -15 degrees Celsius
Massive amount of steps to do but Chris makes it all look easy through this tutorial. Nice job.
Hello Chris, I havent watched this video yet but I just wanted to reply to your newest video to thank you. I really like working on my car but I don't have any mechanical skills and thanks to your videos I can work on my car and make my car better without doing any damage. Keep up the good work! greetings from the Netherlands.
3 years for knowing the product! Man you are BUILT different. Appreciate your patience and effort. Thank you.
I think it's worth the extra time and hassle for you guys. I like knowing what I show is going to be good!
I have been driving with eflexfuel conversion kits for years now and over 100 000miles on couple of different vehicles and everything has been working perfect, even in here arctic Finland. Great system!
Thanks for sharing! That is awesome!
I missed long detailed videos like this. Thanks, Chris.
Bro your video recording skills and voiceover instructions are so on point! You are the goat when it comes to instructional videos
Damn been a while.... We all know Chris Fix never fails us❤
The first 5 minutes of this video make the best marketing eflex will ever have. A three year test is all the confidence a car owner needs.
I wasn’t really trying to “market” it as much as I wanted to explain I’ve tested it for a while and it’s worked great so I don’t mind sharing it with you guys. But I guess that’s kinda what you’re saying lol.
Welcome back !!! 🎉🎉🎉🎉🎉🎉
Omgosh, dude we've missed you! Great to hear your voice and to see your gloves and very organized presentation! Top shelf YT channel!
@chrisfix what a well explained installation!!! 👏👏👏 truly amazing work!!! So happy everyone can see all the benefits that can be unlocked in their vehicles with the @eflexfuel kit and E85 🌽 ⛽️ I just got back from a 1000 mile California road trip in my Element running this kit and wow!!! Saved so much money with these fuel prices! Also gains definitely noticeable when going up hills fully loaded!!! Thanks for making this video 💪🏼🫶🫶🫶🎉
We have factory Flex engines (Gasoline/Ethanol) in Brazil since 2003. Our Ethanol comes from sugarcane. In Brazil we have conversion to Natural Gas (CNG) too, most UBER/Taxi drivers do this conversion (gas is way cheaper).
pretty cool! Thanks for sharing!
Your install was much easier to understand and way better attention to detail. Good job Chris!
Thanks a lot!!! That’s the goal!
Just saw the colab you did with donut media. it was amazing getting to see 2 channels i really enjoy collide. lol my mind was blown when i saw the drive way pop up.
I do like the perfectionism in your work thanks Chris
I bought my kit about six months ago but haven’t had time to install it yet so it’s just sitting in it’s box. I think this video is just what I needed to get me motivated to get out there and install it! Thanks!!
Get it doneeee!!! Let me know how it goes!
It's time to get your flex on! 😃💪
I'll never do this in my life, but I enjoy watching these DIY videos for entertainment. Thanks again Chris
Exactly what I thought.
You never know!
Sallam alikum Chris! Last time i saw any videos from you was 3 years ago. This video is so informative and straight to the point. Love it! you've improved your channel significantly. Keep it up!
Great video dude, extremely informative and clean install!
You never let us down chris good job!
Thank you!
@@chrisfix no problem!
Good quality videos take time. This guy is a very good professor
Hi Chris, top video. My former mechanic taught me a lesson when attaching fuel hoses or any barbed fitting. When you’ve pushed the hose on, rotate it around the barb a little bit. Just a quick twist left and right. It helps the barb fitting go in 100% instead of the rubber pushing back a little bit. Don’t go mad, especially if you’re using a metal barb fitting. Helps you get that 110% you aim for 👍
I have to say, I enjoy so much the love and enthusiasm on all your narrative!
😹👍
Thumbs up for your stuff
Just installed this today. Video was perfect and it was very clear. When you slide the cables into the plastic holder and wait for the click sometimes it doesn’t click in if it’s not perfectly straight. Make sure they are straight! Works perfect!
Awesome!
Hey Chris, how's it going? I hope everything's fine. I'm from Brazil, and ethanol is extremely common to use in many vehicles here. The vast majority come factory-ready for flex fuel, running on both fuels, and always with impressive power gains when fueled with ethanol. It's the favorite fuel for tuners and performance enthusiasts, as it allows for higher boost pressures and keeps the temperature stable, reducing the risk of running too lean. The issue is that this fuel tends to cause injector clogging due to oxidation. So, we avoid using it in vehicles with direct injection. In these cases, for vehicles with direct injection, it's preferred to use Premium gasoline, as the maintenance cost for direct injectors is exorbitant, and once they get clogged, they can rarely be recovered. Greetings from Brazil, Chris. Keep being as awesome as always!
Edit: Hi there, how are you doing? I saw someone commenting on finding it strange that ethanol causes oxidation and consequently clogs the injectors. The thing is, here in Brazil, our ethanol is hydrated, which means it contains a small percentage of water in its composition. Even though it's very low, it's still enough to cause oxidation in the medium and long term. Maintenance for imported cars here is not affordable for many of us, which is why many Brazilians choose not to do it. However, scheduled maintenance includes cleaning and servicing the injectors, which is why this happens so often here, especially in models with direct injection, where maintenance costs are much higher. Keep being awesome, everyone!
Ah... and if I'm not mistaken, our ethanol has a standard of 100 octane and can go up to 103 octane.
Thanks for sharing!!!
Also, we have pure ethanol (E100) in every gas station.
Have not heard this before. Have quite a few friends who run E85 in direct injection cars with zero issues, at least in the USA with pump E85. Makes me wonder if there is a difference in the fuel, especially if it is E100 (pump E85 has some lubricants and other factors to make up the difference from Ethanol).
@@AutoAddicted427 I dont know how is the ethanol in the rest of the world, but here it have like 5% of water in the composition, probably that's the cause.
@@LucasOliveira-nr6ud The water in ours is because ethanol is a hygroscopic liquid, so it attracts water, “there's nothing we can do”. Anhydrous Ethanol remains 99% "pure" as there are processes in its storage to prevent contact with air and thus with water in the air. When mixed with gasoline, the ethanol's ability to absorb water from the air is reduced, but it will still have some.
4:50 coming from someone who’s made countless messes, when pouring fluid out of those cans rotate it 180 degrees so that the air pocket formed above the stream keeps the mess down. Happy to see you back!
THANK YOU CHRIS! Where was this vid when I was trying to install the eFlex kit into my own car? Haha. Lots of comments from people that have not tried eFlexFuel or E85. I researched the heck out of this before getting a kit 1yr ago. I am in the USA and run E85 from the pumps. Here is my experience:
E85 does not cause issues to the fuel system. This was my first concern. There is noticeably more HP/TQ on E85. You can feel the difference when driving, it feels more responsive than when on gas. I also notice my vehicle downshifts less on E85, I think because it is making more torque at driving RPMs.
My MPG are not hugely impacted on E85. Yes, there is some dip, but in my case it is closer to 1-2MPG which makes E85 WAY cheaper to run than gas in my case.
E85 does not cause issues to the fuel system. This was my first concern before I installed. Modern fuel systems are up for the job, there's been quite a bit of research here. There is a reason high HP cars run E85 - even the new Demon 170. I trust the compatibility check Chris mentioned, there is zero reason to think otherwise.
I think that covers it. I don't mind different opinions but I did my research before getting eFlex and have had zero issues, so it's funny seeing the armchair analysts comment without any firsthand use. If anyone has any questions about the kit you can reply here and I will try to get back to you.
Thank you again Chris! This one was a nice surprise.
Excellent, very well made. Impressive video on this install. Torque wrench included, very impressive! As always a very well organized and professional install. WELL DONE !
⚠️Notice to everyone:
If do you decide to do this you will want to do more research. For example, the ethanol in E85 tends to overtime to dry out rubber fuel lines which end up cracking and spilling fuel. So you'll want to replace those rubber lines. I would recommend watching other videos online as well Chris's 2nd video on ethanol when he comes out with it.
P.S. Your videos are awesome Chris!
A reply from ChrisFix underneath another comment:
"e85 doesnt cause issues on anything 2001 and newer. The gaskets/seal are mandated to worth with ethanol. Even 1992 and newer shouldnt have any problems but they were only supposed to run on e10."
@@SkylineLofe Thanks for that.👍
No harm basically in any vehicles that has a electronic fuel injection. eFlexfuel has database and testing for over a decade converting different brand of vehicles and combined mileage is something over 2 billion miles world wide.
So yea, it has been tested.
Love the attention to detail, few things are more satisfying than doing it right 💪
Agreed!
Thanks a lot!
Love the videos man just wish you came out with videos more often. Keep up the good work
Started by watching your channel and teaching myself how to work on cars early in your channel and now I own my own shop thank you for the amazing videos you’ve given me a lot of motivation to do stuff my self and it worked out amazing!!!!
That is awesome!
Another great video Chris. You've been a great inspiration to many people. Thank you for helping the common man or woman teaching us the correct way an breaking everything you do down into simple terms that is easy to fallow and understand
Nice video! Here in Brazil, problably every car comes from the factory with this type of system. And every gas station throughout the country has ethanol as an option. A problem that I see when I use ethanol is that my car dont start right away when the weather is cold. Because of that, some older cars has like a small gas tank in the engine bay to put regular gas just do start the car.
Really hoping you hit 10m soon I don’t known anyone else that deserves it as much as you 🎉
You've come so far I'm happy for you ⛽
Chris is the only man mechanic who can actually keep a 10 mm
You testing this for years says a lot about you. Absolute legend ! I may have to get this for my civic. Hurts seeing 2.xx gas locally that I can't use
I love this guy he gives the best advice to repair vehicles :)
Hey Chris I hope your having a good time and thanks for making more videos
As a Finn that experiences the -30 C winters I can also give one more tip to those that live through the cold winters. As to not struggle starting your car in the winter you want to also add some gasoline to the tank with the ethanol fuel to make a mixture that has more gas.
Dang -30°C does not sound fun!
Our "E85" changes with the seasons in Minnesota. It's really E51-E85 depending on the month. My van will not start with E85 at -30C but 50/50 gasoline it's okay. I don't drive enough so still had summer E85 in the tank in January and could not start. Added 20L of E10 and it was okay and stayecd okay with winter blend.
@@RyanMPLS You claim that you're Minnesotan, but you're using metric? Ya sure the Canadian's aren't rubbing off on ya?
@@vandorb12 If only the Vikings could make it 9.9m instead of 9.9 yards!
@@vandorb12 metric is the future.
Plus it makes sense
I would suggest you to make a video on how to add Turbo/SuperChargers as they are very addictive to performance groups, and you are very trusted and reliable creator everyone appreciates your efforts and must be desperately waiting for such content.
Yes that is definitely happening!
Yes I definitely agree and endorse this!
Fantastic tutorial. I was curious about e85, not very common to see in Europe, there are a few gas stations in France that had it, but not much. Just a small detail I wanted to point out that I normally do to prevent a wrong wiper placement. I use electrical tape next to the wiper to make sure I don't skip a tooth that can make the wiper hit the A pillar. Nevertheless, glad to see you back.
Great tutorial, my car's running on e85 now! 🚗💨
I know someone else will mention it: Those hose grip pliers work GREAT for wrangling up loose wires into the split-loom. Just grab the bunch of wires in the open part of the pliers, close em up lightly, and slip the head+wires INSIDE the loom, and then pull with a bit of force and they just ZIIIIIP right in! Sometimes pulling the loom is easier, sometimes the wires, sometimes the pliers can sliiiiiide along as well. Oh so satisfying.
Interesting.. that’s a really good idea!
@@chrisfix give it a try on some random loose wires, it is hard to describe in words, but obvious once you try it.
I want to say thank you for explaining things in the way you do because it makes things so much easier for those who aren't as handy, or have learning disabilities(Like myself), or have trouble physically(Like myself as well, due to a accident from my time as a Paramedic). So please keep up the awesome videos and here's to many, many years of learning awesome tips and tricks!
I am glad the videos have been helpful and learning from them is easy! That is my goal!!!
I agree.
I am so glad you did this on the same gen Prius I have. I want to do this to my Z soon too.
I really enjoy your channel keep up the good work and thank you 🙏
Thanks Chris for the effort and hard work you put on every video, you make me learn a lot of cars and how to fix them. I don't have enough words to describe how thankfull I am
I’m glad you’re learning a lot! That’s why I make these videos so I appreciate the comment!!! Keeps me going.
Fun fact, almost all cars in Brazil are flexfuel from factory and ethanol (110oct) is as common to find on pumps as gasoline and diesel (and our ethanol is made out of sugarcane)
And I wish the fossil fuel lobby and politicians in Germany didn't kill that option by raising the taxes on E85 to be similar to regular gas. Since cars use up to 1/3rd more when running E85, it became an even more expensive option and no one bought it anymore, so you can't get it anymore and no flexible-fuel vehicles are sold here.
And after all that, now there are talks/demands to limit/reduce the maximum speeds everywhere to reduce the pollution from the vehicles, which could've beed prevented in the first place if not for the artificial tax... 🤡
Since 2008 you have been on youtube. Maybe even longer.
I want to be successful like you in the same ways, doing it through cars and helping and teaching people
. I probably will try to replicate a lot of what you do in your videos the way you talk, the delivery, the quality,
the information to hopefully bring a channel of value to people so i can also be successful and do what I love.
Please don’t sue me lol you’re my inspiration and I look up to you man !
I want to Create a CZcams Channel
I’ve been watching you for years. So cool you are about to hit ten million subscribers, you’ve earned it. I appreciate every video you have done.
Thank you!
Hey, been following for a while. Love all your content. Super straightforward, easy to understand and makes doing it at home a breeze. I’ve looked through your channel a few times trying to see if you happen to have any videos on doing a head gasket replacement, timing chain service (changing the chain and other components that go with it), as well as interested if you are looking at doing any engine swap videos on the future, I know your doing a turbo install which is great, can’t wait! Thank you for your guidance🙏
It's a very special day when Chris posts a video
I never knew I'm they made a kit, I'll definitely have to get one for my car, thanks chris.
I love your videos brother you are a blessing for the car community ❤ 👍👍
Thank you.
Hey guys , Chris Fix here!!
That feeling when you hear that line...
I turn 16 in a month so I’ve been nonstop watching your videos so that I’m prepared when I’m driving. Sadly my dad isn’t really able to help me with these things but your videos are really helpful. Keep up the great work and good luck on the move 👍
That is exciting and I am glad the videos are teaching you a lot! Happy early bday!
@@chrisfix Thanks man 👍
I swear dude,this guy is AMAZING
J'ai le kit depuis un an dans mon garage et jamais trouvé le courage de l'installer sur mon Lexus Rx400h
Avec toi tout a l'air tellement simple !
Grâce à toi je vais me lancer !
Many thanks Chris !!
bon courage pour l'installation ! ;)
Bien
I love this. I work at a plant that makes ethanol and I'm glad you understand the benefits properly a lot of people aren't educated on the topic
So many myths. I had no clue before I did all the research!
It's honestly out of this world. Reminds me of how oil companies tried to bury EV's when they were first coming out too - even buying battery patents and intentionally sitting on them. I think a similar thing was seen with Ethanol. Thank you for spreading facts@@chrisfix!
you make everything looks soo easy thanks to your hard work! great videos my man you are an amazing teacher👌
Glad to see Chris back
You are so professional, getting good angles even in all those tight spots you are a special kind of youtuber. No wasting time everything is nicely presented so people can go to the description and do it themselves. It's amazing the work you do and I hope you know it.
Must be an appreciating video. Very well explained and your safety precautions and procedures are on different level. Well done Chris. Best luck try to keep up.💪
Thank you very much!
Super clear tutorial! The eflexfuel kit seems excellent: everything one needs and all of the features. Thanks for the thorough testing and the video! ❤
😃💚
my mechanic works really rough, i showed him ur video last week and yesterday I visited him he was wearing gloves using paper towels and zip ties to make sure its packed. and fitting every part back clean not dirty as before... he really took ur videos seriously 😆
This channel has the BEST How To vids on CZcams
100%
Thank you
This is a great change! Especially when the gas prices have risen. Thanks Chris! And also its better for the environment too! What a change!
Hahaha ethanol is not better for the environment. Look at the subsidies that have caused massive deforestation and land damage. Also because it’s subsidized we feed it almost exclusively to cows, instead of having more grazing cows.
It's usually balanced out by the fact that you get 15~20% less gas mileage on e85
I'm seriously considering this for my own car. I drive a lot as it's part of my job. The gasoline costs ~2 euros per litre. Which is about $8.26 per gallon. :)
Its not better for the environment at all, engineering explained has a video on it where he actually comes to the conclusion that it uses more resources to "feed" the corn than the corn gives back in returm, making it even worse for the environment than regular fuel.
@@BadMax02_VR well I guess your right but I was talking about the air quality
I always learn a lot in your videos and I like it because it's fun to watch.
Even though my car is already flex, almost every car here in Brazil is and every gas station has ethanol, gasoline and diesel.
Your drifiting has gotten clean 👊
Chris I love your vids so much I watch you vids before I go to bed
Bro it’s like you were inside my head! I was literally just looking at e85 kits for my trackhawk and then you dropped this banger video
My ChrisFix senses were tingling haha
I don't have car to install the kits but I love watching your videos ❤😂
Finally, are favourite car mechanic is back!
i had no idea there was a kit that made it this simple, i def wanna convert my 93 nissan hardbody over to e85. thanks for this video :D
You are letting the driftstang behind bro we love it ❤
I have same kit on my Mazda MX-3. I live near this company. As a Finn, it is nice to see an automotive product made in Finland. Highly skilled people and quality product!
How's the mx3 running so far? No tuning required?
I recently followed your page. Your very good dude
please keep posting videos
Welcome aboard! And I got a lot of videos being worked on now, stay tuned!
Good to see another video from you. Always love your filming style. Good luck with getting the move done
Thanks a lot!!!
This is my first notification from Chris fix CZcams channel.I have learned a lot about my car in the last two months.A few days ago I changed the oil in my car for the first time.
And I really don't know how to express this feeling..I will always be grateful to you..To create such a beautiful CZcams channel..I don't know about others but it was really very helpful for me..♥️♥️♥️♥️
Im glad you were able to do an oil change with the help of the videos! Thanks a lot!
@@chrisfix Hope the trend of uploading videos will continue.Take care of your health.🤍
Congrats on going DIY! There's a great feeling you get when you fix something on your own. Something special when you turn your own wrenches and know how to do stuff.
@@Ikantspell4 exactly
Chrisfix never fails to teach me something new 🙏
Thanks man. I learned a lot from watching all your videos. 👏
I've actually been wanting to do this. Looking forward to learning how!
Perfect! Now you know the process!