Trail Tech Endurance II Installation. Easy, clear, quality video on how to do this.

Sdílet
Vložit
  • čas přidán 6. 09. 2024
  • This video covers how to install a trail tech Endurance II on a dirtbike (Kawasaki KX250F)
    Trail Tech 202-118 Endurance II Digital Gauge Speedometer Ki
    amzn.to/2DzPgCv -TRAIL TECH Endurance II ON AMAZON:
    amzn.to/2tcNfav - Bondhus 13389 Set of 8 Hex T-handles with Stand, sizes 2-10mm
    amzn.to/2BpTThR -Motion Pro 08-0113 T-Handle Metric Socket Set

Komentáře • 19

  • @corradovanaken3553
    @corradovanaken3553 Před 5 lety +3

    Ive bought this product and this is the BEST VIDEO IVE EVER WATCHED ON A INSTALLATION

  • @inthesPhila
    @inthesPhila Před 2 lety +1

    Put a Trail Tech Endurance II on my KTM EXC 250 4 stroke RFS 2003 and like it. It went right in the rubber holes that the OEM speedo came out of after a tree crinkled it.
    Two long 4 mm bolts and 4 nuts were the hot set up with two biggish washers. Bolt, then nut then washer then nut then up through rubber holes into Endurance II on both sides. Hand tighten bolt into plastic. Snug jam nut to plastic with 7 mm open end. Wiggle down into rubber holes, than run nut up bolt to snug washer against the bottom of the rubber holes. I reset both left buttons with my right thumb while riding. This will come in handy at Dual sport "resets" on the move. I kept it down low so the old style brake line is always looping above it.

  • @jking9916
    @jking9916 Před 5 lety +3

    I have this same speedometer on my pit bike and fixing to install another one on my enduro. Well made and not too expensive and works perfect. Great video 👌

  • @ekarchery60x27
    @ekarchery60x27 Před 5 lety +4

    Good video. Your forks are leaking

  • @postdeath2978
    @postdeath2978 Před 5 lety +1

    new text layer the bolt. Nice video and thank you!

  • @danten7774
    @danten7774 Před 4 měsíci

    great job

  • @jeffpaxton9172
    @jeffpaxton9172 Před 2 lety

    Why didn't you mount the sensor to your fork guards?

  • @muriuwangai3617
    @muriuwangai3617 Před rokem

    Hi, am trying to acquire a used vapor speedometer online without much success. Am scared of getting a disfuntional one to kenya. I need one for my Serow xt 225. What's your take? Been following your videos

  • @BillyTzENDURO
    @BillyTzENDURO Před 5 lety

    Interesting seeing the installation, really thinking of getting one, does it run on an internal battery? or where does it get power from?

  • @TopshelfJunior
    @TopshelfJunior Před 3 lety

    Taking a complete shot in the dark here but, I have a 2020 KLX300R trail bike.. Does anybody know a good speedometer / tacometer I can add to the bike ?!

  • @JanChacn
    @JanChacn Před 2 lety

    How about rpm sensor?

  • @danten7774
    @danten7774 Před 4 měsíci

    that bolt is a nut and the screw is the bolt

  • @vendetta1306
    @vendetta1306 Před 5 lety +3

    Bless you

  • @seanylewl
    @seanylewl Před 4 lety

    How do you power the unit?

  • @daydaylol209
    @daydaylol209 Před 5 lety

    So how’s it get power ?

    • @pickels2598
      @pickels2598 Před 5 lety

      MXG 209 Runs on an internal battery like a watch

  • @johntulin2227
    @johntulin2227 Před 19 dny

    Lol oh wait I didn't receive anything from trail tech 😂 gold

  • @fishybastards
    @fishybastards Před 10 měsíci

    Its a nut not a bolt.