Click the link below to view the latest installation video - • Rekluse Left-Hand Rear... Rekluse guides you through the installation of the updated left hand rear brake kit.
Installed the Core EXP and LHRB on my 2017 KTM 305sxf. They work AWESOME! Due to an injury I have a very difficult time reliably hitting the rear brake with my foot. With the clutch and brake combo I can use the back brake EVERY time I need it without the worry of stalling also. On the big downhill at Glen Helen it was SO nice to know I was going to be able to use the back brake. I can do basic work on my bike and the installation was easy and went just as described in the video and manual. The clutch is great, but it is a little strange coming to a stop and not having pull in the clutch. You get use to it quickly though. My speed has increased, but more important, my confidence is much higher just knowing I can always have the rear brake also.Thanks! Great products!
This is the kit I’ve decided on due to my amputation ,I had an adaption done myself for thirty odd year braking with my heel ,. But I’m going back in to off road riding ,so currently it’s going on my Honda four hundred super four ,small adaption needed for handler clearance but have that covered mechanically adept .so the thought off removing it and using it on dirt bike for weekends wasn’t gonna be a hassle .but I’ve thought about the benefits off the clutch doubling up via break so I am gonna buy two ,you lucky dudes .but great bit off kit .cheers .
Just finished installing. Was a piece of cake and I have Amateur mechanical skills. One thing I did, I routed the LHRB line behind my shock as the line was longer than needed. Bike: 2015 KTM 300XC.
Take a pair of vice grips, pinch the brake line after the banjo bolt (firmer the better), pump release pump release, only one man needed. Congratulations, you just made a one way valve. This allows fluid down but not back up. Also works great for hydraulic clutch bleeding
Hello Not4u, thank you for watching our video and responding. We are only offering the silver lever in our kits now. If you need anything, please feel free to contact our Customer Support Team - Customerservice@rekluse.com. Thank you!
Hi, I purchased the Rekluse rear hand brake and the Enduro Engineering brake light switch for my 2018 KTM 300 XCW. The Banjo Bolt is too small for the EE Banjo bolt that is necessary to run the brake lights. Is there an option to make these work in concert with each other?
i'd ask if your kit that fits the '02 Honda CR250R could also fit a '00 CR250R with some alteration if necessary, but it doesn't look like anyone's questions are being answered here by Rekluse...
Hi guys have been trying to buy a service kit for brake kit , mainly o rings (53.1 & 53.2) or if you could advise on both sizes ? Many thanks pat from UK🤘
Hey Pat, thank you for reaching out. Our international business is done through our distributor network. Our distributor in the UK, CI Sport, will be able to help you get your O rings. Their email is sales@cisport.co.uk and their website is www.cisport.co.uk
Big spoops I haven’t heard of an auto clutch (used to race moto back in the late 90’s and am just getting back into riding) so I’ll have to check that out. Thanks for letting me know. 🤙
Thanks for your question. We do not make any products for the TRX 300EX. If you would like to make a product request, please e-mail customerservice@rekluse.com, or if you have any more questions you can give the team a call at (208) 426-0659 8AM - 5PM MST. Thank you and have a nice day.
Thanks for your question. We do not make a Left-Hand Rear Brake Kit for the RMZ 250. We do however make a full clutch product line for your bike. If you would like to learn more about those products, you can visit www.Rekluse.com and use the "Select your ride" feature. If you would like to make a product request, please e-mail customerservice@rekluse.com. Thank you and have a nice day.
Anyone know of a source of info on REMOVING a rear hand brake set-up? Just bought a used bike with one and don't want it. The pedal is still hooked up in addition to the Magura lever unit. The hydraulic line feeds into the rear cylinder with a banjo bolt. Can I just pull the line and banjo bolt and plug the hole with an identically threaded stainless steel bolt and o-ring?
Hi there, thank you for reaching out. We are currently in the process of a redesign of our brake kits, so the model shown in this video is no longer available. The new kit should be ready some time after the first of the year
Hi Kristian, thank you for your interest in the product. We are currently developing a new Left Hand Rear Brake which will be available in the next few weeks. You can follow us on social media or contact our customer service team with your information so we can let you know when the new product is available. You will be able to purchase from us or your local dealer.
Thanks for your question - Our Left Hand Rear Brake Kit will fit 2004-2019 CRF205R and 2004-2017 CRF250X, part number RMS-5311A. It retails for $329. You can visit our website to order or learn more - rekluse.com/product/brake-kit-dual-actuated/
I went to like it but had to stop myself to keep it at 666. I think I'm just gonna use a cable brake off a bicycle to pull on the end of the foot brake lever on my $500 dirtbike project, but I really like the idea of having a hand actuated rear brake for tricky descents.
Hi there, we are sorry to hear you are having trouble with your brake kit. If you have not already, please reach out to our customer service team to see if we can find a solution for you. We do our best to make spare parts available for at least a couple of years following a product discontinuance.
Installed the Core EXP and LHRB on my 2017 KTM 305sxf. They work AWESOME! Due to an injury I have a very difficult time reliably hitting the rear brake with my foot. With the clutch and brake combo I can use the back brake EVERY time I need it without the worry of stalling also. On the big downhill at Glen Helen it was SO nice to know I was going to be able to use the back brake. I can do basic work on my bike and the installation was easy and went just as described in the video and manual. The clutch is great, but it is a little strange coming to a stop and not having pull in the clutch. You get use to it quickly though. My speed has increased, but more important, my confidence is much higher just knowing I can always have the rear brake also.Thanks! Great products!
moveslikeasnail where did you get this from ?
What is the name og that rear brake handlebar set??
This is the kit I’ve decided on due to my amputation ,I had an adaption done myself for thirty odd year braking with my heel ,.
But I’m going back in to off road riding ,so currently it’s going on my Honda four hundred super four ,small adaption needed for handler clearance but have that covered mechanically adept .so the thought off removing it and using it on dirt bike for weekends wasn’t gonna be a hassle .but I’ve thought about the benefits off the clutch doubling up via break so I am gonna buy two ,you lucky dudes .but great bit off kit .cheers .
Just finished installing. Was a piece of cake and I have Amateur mechanical skills. One thing I did, I routed the LHRB line behind my shock as the line was longer than needed. Bike: 2015 KTM 300XC.
21AirDrop where did you get this from ?
TeMPeR Reboundz Rocky Mountain ATV/MC
If only bleeding was this easy! I fought mine for a couple hours, and I still have jack squat for pressure at the LHRB.
zip tie your brake lever in the on position over night
I'm in the same boat. About to throw this POS rear brake setup in the trash.
I'm here for my ktm ebike lmao.
So I can wheelie it
Take a pair of vice grips, pinch the brake line after the banjo bolt (firmer the better), pump release pump release, only one man needed.
Congratulations, you just made a one way valve.
This allows fluid down but not back up.
Also works great for hydraulic clutch bleeding
he says "INCASE YOU DAMAGE ONE" with such hate
Will this work for a 701 ?
Thnks for the video.i installed mines today in one shot great video
this looks like a greate Supermoto setup
When are you going to come out with a left hand rear brake for Kawasaki KX450s?
Does this setup work on Kawasaki sportbikes ?
is there anyway to get this kit on my duke 690 2014 mod ?
IS it possible to get one of these for a 2020 Kawasaki Vulcan 650S, I have a prosthetic right leg and cannot use the rear brake.
These sorta work, Clakes really work.
Is it possible to use one of your kit in a Yamaha YZF 600R ThunderCat? Probably '96
How did you get the black lever?? on their website is silver lever
Hello Not4u, thank you for watching our video and responding. We are only offering the silver lever in our kits now. If you need anything, please feel free to contact our Customer Support Team - Customerservice@rekluse.com. Thank you!
Hi, I purchased the Rekluse rear hand brake and the Enduro Engineering brake light switch for my 2018 KTM 300 XCW. The Banjo Bolt is too small for the EE Banjo bolt that is necessary to run the brake lights. Is there an option to make these work in concert with each other?
Do you know if it will work on a Honda grom
is there a kit that fits 98 honda cbr?
i'd ask if your kit that fits the '02 Honda CR250R could also fit a '00 CR250R with some alteration if necessary, but it doesn't look like anyone's questions are being answered here by Rekluse...
do you have a kit like this for ktm 690 smc ? 2010
Hi guys have been trying to buy a service kit for brake kit , mainly o rings (53.1 & 53.2) or if you could advise on both sizes ? Many thanks pat from UK🤘
Hey Pat, thank you for reaching out. Our international business is done through our distributor network. Our distributor in the UK, CI Sport, will be able to help you get your O rings. Their email is sales@cisport.co.uk and their website is www.cisport.co.uk
does this fit on a husky 701 plz need to know
If your system is a magura that's a big No, Brembo Yes, Magura no..... And I got that straight from recluse in Boise.
Is this powerful enough to stunt
MBKStunter test
SonOfGod no money for just testing it
No
for stunts i would recommend a separate 2 piston caliper
Why would you want to move your rear brake to above your clutch unless you’re disabled or something???
The point is you have a rekluse auto clutch so you dont need to use the clutch and just have a rear brake in its place
Big spoops I haven’t heard of an auto clutch (used to race moto back in the late 90’s and am just getting back into riding) so I’ll have to check that out. Thanks for letting me know. 🤙
@@mxcollin95 Np man, rekluse makes some dope auto clutches!
So you can do seat stander wheelies pretty much only point of a handbrake lol
Will just work on a 96 Yamaha Royal Star 1300
Hi Cesar, thanks for your interest however this product is only available for select off-road models.
can you give some more ideas when having a soft pressure point?
soooooo does this work on street bikes???
It barely works on a dirt bike. I wouldn't trust it on my kids trike.
You guys got anything for a Honda Trx 300ex
Thanks for your question. We do not make any products for the TRX 300EX. If you would like to make a product request, please e-mail customerservice@rekluse.com, or if you have any more questions you can give the team a call at (208) 426-0659 8AM - 5PM MST. Thank you and have a nice day.
You got anything for 2016 Suzuki rmz 250?
Thanks for your question. We do not make a Left-Hand Rear Brake Kit for the RMZ 250. We do however make a full clutch product line for your bike. If you would like to learn more about those products, you can visit www.Rekluse.com and use the "Select your ride" feature. If you would like to make a product request, please e-mail customerservice@rekluse.com. Thank you and have a nice day.
Anyone know of a source of info on REMOVING a rear hand brake set-up? Just bought a used bike with one and don't want it. The pedal is still hooked up in addition to the Magura lever unit. The hydraulic line feeds into the rear cylinder with a banjo bolt. Can I just pull the line and banjo bolt and plug the hole with an identically threaded stainless steel bolt and o-ring?
The kit replaces the brake cylinder cap - did the previous owner still have the stock cap somewhere? If not, should be a pretty cheap part.
Do you still get to keep the back brake peddle on it
Amy Bavaro yes, but i took it off
I have a ktm 500 2018 , where can I buy one of theses?
Hi there, thank you for reaching out. We are currently in the process of a redesign of our brake kits, so the model shown in this video is no longer available. The new kit should be ready some time after the first of the year
Where can I buy this product?
Hi Kristian, thank you for your interest in the product. We are currently developing a new Left Hand Rear Brake which will be available in the next few weeks. You can follow us on social media or contact our customer service team with your information so we can let you know when the new product is available. You will be able to purchase from us or your local dealer.
Rekluse Motor Sports ..great. Will you introduce a cable version, or only hydraulic?
Can i use this to do Supermoto stunts?
👍.....thanks a million!
no reservoir on the master??
The reservoir on this model is integrated into the rear master cylinder
does this works on a suzuki ltr 450 quad?
Hey Andre, thank you for reaching out. Currently we do not have an application for your LTR 450
Hi mate :) will that fit on NC700 DCT Honda?
Hi there, this kit will not fit on your NC700. We currently only cover off-road applications. Thank you for your interest in our products!
it would be better if the pedals behind .. later pressed thumb .. like pressing the horn
How much for this kit and does it fit crf250
Thanks for your question - Our Left Hand Rear Brake Kit will fit 2004-2019 CRF205R and 2004-2017 CRF250X, part number RMS-5311A. It retails for $329. You can visit our website to order or learn more - rekluse.com/product/brake-kit-dual-actuated/
realy nice produc !!!
dose it work on a Honda XL 350r
Hi there, due to differences in the bike's master cylinder, this kit will not fit a Honda XL350R
Where to buy?
Kyle Pinder website or retailer
I went to like it but had to stop myself to keep it at 666.
I think I'm just gonna use a cable brake off a bicycle to pull on the end of the foot brake lever on my $500 dirtbike project, but I really like the idea of having a hand actuated rear brake for tricky descents.
this mod is similar to a junction valve mod
Yeah they go out after a few seasons and reckluse doesn’t make the parts for their old ones. Steer clear
Hi there, we are sorry to hear you are having trouble with your brake kit. If you have not already, please reach out to our customer service team to see if we can find a solution for you. We do our best to make spare parts available for at least a couple of years following a product discontinuance.
can't believe there's no link lol
At first I thought it was double calipers
Your going to damage one!
So did he have a Hand and a Pedal brake??
JanusOnFire yes
Where can I buy this shit
Discontinued
You don't explain how to do it on hondas u just tell us what it looks like useless