Powder Coat at Home // Eastwood Powder Coating System MODIFIED
Vložit
- čas přidán 18. 08. 2024
- Check out this Eastwood Dual Voltage Powder Coating System!! If you make it to the end, I will show you HOW TO MODIFY the Eastwood System. I’ll show you all the things you need to powder coat in your garage at home.
Don’t forget the CORVETTE PROJECT videos!
As an Amazon Associate I earn from qualifying purchases
Eastwood Powder Coating Systems:
Single Voltage amzn.to/3L3NZFs
Dual Voltage amzn.to/3rrW0MN
Elite Hot Coat amzn.to/34zd2zE
Disposable Air Dryer amzn.to/34g8cHD
Best Air Regulator amzn.to/34d4Y7V
Decent Air Regulator amzn.to/34zdspI
Cheap Air Regulator amzn.to/3sfPs2Z
Oven Gloves amzn.to/34lVZB7
Respirator amzn.to/3gpse4W
Surface Pre Solvent for cleaning your part amzn.to/3saYNck
High Temp Masking Tape amzn.to/3rrGyQH
High Temp Plugs amzn.to/3sl2OLg
Stainless Steel Wire amzn.to/3rr3W0A - Auta a dopravní prostředky
Wow, that's a great demonstration and modification of the powder coating gun! Great enthusiasm throughout the video!
thanks for the info on the gun like the modification was actually thinking of buying one of these
It’s a decent set up for the money. You can get great results, but prep is key! Thanks so much for watching.
I've always wanted to powder coat my calipers. . might just have to try this, thank you!
It really is easy and the results are spectacular :-) thanks for checking out my video!
The small black plastic piece on the front, called the diverter tip, is pushed waayyyyy too close to the barrel. You don't need the piece of PVC, you just need to pull off the diverter tip when doing small pieces like that. For an object the size of a plate, put the diverter on so it is flush with the end of the metal rod. Anything smaller, remove the diverter entirely. You have it choked up far enough to coat a 4 foot square sheet. Loving that rust cleanup though, good job.
Great idea! Thanks for the tip!
Great job 👍🏻
Thank you! Once you get set up at home, you will want to powder coat everything!
That’s tip was helpful and thanks for sharing. That deserves a like and sub!!. That is crazy how much powder is wasted, is it possible to scoop it up and reuse it??
Thanks!!! It would be hard to reclaim that powder. I don’t recommend bothering. Thanks for the sun! The vette project is about to start!
Why didn't you just take the diffuser off for free and get the same result? That's what I did.
I felt like taking off the diffuser made it worse. I’ll try your method next time. Thanks for watching!!
💪👍💯
Thanks for your support! More videos to come!