Connect Insta360 X3 To Cardo Packtalk Edge. Two methods
Vložit
- čas přidán 10. 04. 2024
- This video shows two methods how to connect Insta360 X3 & Cardo Packtalk Edge.
The first method connects the devices normally via Bluetooth. With this method, only the sound of the own device microphone is recorded on the camera.
Second method connects the devices using the Pactalk Edge Bluetooth bridge function, in which case the group conversations are also recorded on the camera from the DMC(mesh) network
You only need the other headphones when you connect the devices for the first time, do a factory reset or remove the device from the X3 Airpods menu!!
Headphones used in the video are JLab Go Air Sport Earbuds
It is easy to change the connection method at any time.
You just disconnect the Cardo Edge in the Airpods menu of the X3 camera. (Do not delete!)
Next, you start the search in Edge with the connection method you want. When the search is on, I just select Edge in the Airpods menu of the X3 camera and the devices are connected again using the method you want.
Link to my old Packtalk Bold video
• Connect Insta360 X3 To...
Cardo Packtalk Edge Full Tutorial
• Cardo Packtalk Edge Fu...
#X3bluetooth
#insta360x3
#instax3
#cardosystems
#cardopacktalk
#insta360bluetooth
#cardopacktalkedge
That was extremely helpful! Thank you so much!
Great video!!! Thank you! It worked so smoothly for mine
Thank You Very Much For Video From India 🇮🇳
Very thanks for you I already success,the point is need to the other AirPod
Does this work on the cardo freecom +
Hello. Should it always be done? Or is it one time?
It is easy to change the connection method at any time.
You just disconnect the Cardo Edge in the Airpods menu of the X3 camera. (Do not delete!)
Next, you start the search in Edge with the connection method you want. When the search is on, I just select Edge in the Airpods menu of the X3 camera and the devices are connected again using the method you want.
Hi.. have you try with cardo spirit?
I have no information about how the Spirit model works.
Hello, I have a problem that after connecting the Insta360 x4 camera with Cardo Edge to record a group conversation, it does not synchronize the sound with the film, i.e. in the editing process the sound is randomly shifted in time relative to the film, and with very long recordings at the end of the film the sound is as if sped up several times. Why is this happening. Best regards.
Thanks for update on this
Will it record the conversation on dmc mode?
Yes
Do you have to have the thing on the side of the insta 360?
No. It's an Audio adapter for a wired mic. In addition, also USB-C connection. Bluetooth connection to the Cardo intercom does not require any additional equipment.
Can you still connect the cardo to your phone when it is connected to the x3?
Connecting is possible, but the connection seems to be quite unstable.
At least for me, music playback keeps stuttering. It doesn't matter which way the camera is connected.
When the camera is bridged to the DMC network, the Edge microphone works even when the phone is connected.
But when the camera is connected normally via Bluetooth, for example in GPS mode. The sound of Edge microphone is not transmitted to the camera when the phone is connected.
The Connection works, but when i start Recording there is no more sound, not from me, not from the surroundings. Any ideas?
"Connecting is possible, but the connection seems to be quite unstable.
At least for me, music playback keeps stuttering. It doesn't matter which way the camera is connected.
When the camera is bridged to the DMC network, the Edge microphone works even when the phone is connected.
But when the camera is connected normally via Bluetooth, for example in GPS mode. The sound of Edge microphone is not transmitted to the camera when the phone is connected."
I'm disappointed with Edge that the device has such good noise filtering that only speech is transmitted to the camera. All engine sounds and etc. are cut out. You cannot connect another sound source at the same time, not even a wired one.
I have not managed to synchronize the sound recorded with sound recorder properly with a few programs that I have tried. (Davinci resolve and Filmora). The sound is not clear enough, which is produced when riding a bike.
I've tried turning off noise cancellation in the settings, but no change is noticeable at all😤
same goes to me..only voice can hear clearly, any other sound eg engine sound cant be heard.
If your mike is insjde your helmet it's not able to hear the ambient noise
@@brighton1950 i'm using open face helmet. so the mic is not covered. i' was thinking to remove the sponge around the mic later to see how it perform.
Carda menüden gürültü azaltmayı kapatın. Ancak çok yüksek sesleri alıyor
Doesn't work for Sena 50 series. Insta360 was able to detect the intercom but said "failed to connect" for some reason. Thank you anyways.
Then it doesn't work together at all. I tried to connect the navigator to the camera and I got the same message.