Video není dostupné.
Omlouváme se.
How to Set a Flycutter to Machine a Specific Diameter
Vložit
- čas přidán 12. 08. 2024
- This video will show you two ways to adjust your flycutter to deliver very precision radial cuts. No need for a boring head, CNC mill or a turntable. Take a look.
Learning something new everyday to help better my machining skills. I would have loved to do it for a living. But didn’t know the math. Now that I’m older the math is making more sense, and your videos are helping a lot with that stuff. So now I get to enjoy machining as a hobby instead!! 221
Another excellent video. Thanks Joe.
The first rule of 221 Club is: You do not talk about 221 Club. :-)
Who doesn't love these videos?
Hi Joe , I've always struggled setting a flycutter accurately. After watching you video on setting a flycutter , shan't struggle anymore. Incidentally all your video lessons are great . RESPECT !!
Feeling slightly dyslexic, so here's a hearty 122 at the best 221 channel on CZcams.
I love your videos that have a simple and elegant way of using common tools to find a solution to a machining problem. Thinking outside the box should be taught in school.
Apparently I stay up 83 minutes later than Bob Jones as it is now 2:21 here.
You never fail to amaze me with your logical 221 approach!
The knowledge I pick up from your videos in a few weeks would have taken a lifetime to amaze as a machinist 20 years ago... 221
I used your second method years ago when setting up a boring head to make several different heads for a rifle receiver wrench. Thunk it up all by myself. Made 221 of them. One of them was for a Remington 700 in 221 Fireball.Thanks Joe
After seeing the Texas Country Reporter piece, I get how you think. I really like the visual way you teach. It really works for me. I didn't understand how you hit me between the eyes almost everytime you have a vid. Now I do. Thanks man! You are a great professor.
Much appreciated.
I'm new to machining, and really enjoy your content. Straight to the point, no BS, no rambling, all meat, no filler. I only have a 7x14 mini lathe at this point, but I can apply all of the concepts you show here to my humble hobby projects, and I'm very appreciative of your time & patience. I think I have a lot of videos to catch-up on, 221 at last count, but be assured I will watch every one of them. Thanks for doing what you do.
Thanks Joe!! I use your setups all the time now. Just got all the tooling to do the inverted threading tool to cut away from the chuck on the lathe and it's saved me a couple times now. Just wanted you to know your vids are appreciated, keep em coming!
One more example of why Joe is the best. I searched for setting up a boring head and no one had anything on measuring the cut. Searched boring on Joe's channel and the perfect explanation came up. Thanks Joe !!!
221 just like to say thanks for all you do for the machining community thank you stay safe.
Glad to do it.
You are a straight-forward, straight-shooting kind of instructor. I enjoy learning from you 221 ways.
From a farmer of over 221 acres, appreciate everything you do. Learned so many things, to make my parts better, chips faster, and less scrap. 👍🏻
Wow. Thanks.
Can you talk about the grind on your flycutter tool some day? Nobody's really gone over that in any detail. Two twenty-one!
I second this.
It looked like the tool had a lot of negative lead and a lot of positive rake - not what common wisdom says gets a finish that nice in aluminum.
Keep them coming!!! The more the merrier, and the easier it becomes for me to get a machining setup done with out having to spend an entire day thinking about it. Watching and listening to other folks that have already solved problems is the best way to learn! Two Hundred Twenty One.............
I agree. Why struggle if you don't have to.
I like all the machinist channels on CZcams, but I love your explainations and tricks.
You are bridging the gap between theory and practical problem solving like no other.
Excellent work, great explanations, clear messages - it can not be done better.
Thank you for sharing things with us, which we did not learn and we would have never discovered without you!
Thanks Joe. Useful ideas.
I would imagine there are at least 221 operations of yours that I have yet to see.
I've watched quite a few but I'll keep watching and rewatching until I've seen them all.
Then, I'll watch them all again... a few more times.
Thank you Joe.
YOU'RE !! A !! FOOL !! FOR !! CLICKBAIT !!!
I don't own a lathe or mill, but I love working with metal and welding and there are 221 reasons why I like your channel.
It clearly shows that You love what You do and Your teaching ability is outstanding.
Keep it up Joe.
A very big 'Thank You' from The Netherlands.
Always worth watching 221. I'm of a similar age to you and am getting back to the fun of machining after some 30 years away from the workshop, and I learn something new or am reminded of something I'd forgotten in every video you post. Thank you.
Joe, I am so glad I found your channel. Your efficient and clear approach to explaining this stuff is perfect for my way of learning. I am now going back to find more of your videos. Gig'em Aggies 221.
You should be teaching the young top grade engineers of today your knowledge, at least rite a book with it all in, yes it would be as thick as Machinery hand book & more, but well worth it, your instructions glide into practice backed up with mathematical instructions too. Your dedication to detail (gun action you produced) without clatt noting bigheaded or belittling comes from you, one serious straight forward man, Texas would be lost without you. What ever you do don’t get fed up making videos, on screen perfection. P in your name, passionate,practical,perfection. Tom L seems to have taken a well deserved back seat these days & hay that man is fantastic too, keep em coming brother fantastic channel.
Thank you for the compliment sir. Tom L and the other You Tube hosts were my inspiration for sharing my knowledge. If we all knew what the other guys knew, it would be scary how smart we would be. I will never profess to know everything, but I do consider myself a high level problem solver. Take care.
Thanks Joe. There are over two hundred twenty one reasons why I watch your channel. As a creator myself, I know how much effort that goes into creating the videos.
2 methods shown. 2 excellent pieces of advice, 1 of which wasn't obvious to me before I saw it. Thanks Joe.
Really like your videos. I'm a 63 year old newby at this stuff and you're really enlightening me.
Niek from The Netherlands
Joe, thanks for your contributions. I’m a novice learning all the time from you and other great folks on here. Thanks for being a great teacher 221.
Single point cutting for the win again! I've never considered a fly cutter for this purpose, so I really appreciate that Joe shared this :-)
Joe, your tips make even amateur self-taught wannabes like me look good. I have a specific job in mind for this one.
221 thanks!
Hey Joe, your videos are the high point of my education on how to properly operate metal working machines.
Take care
From 221 Lubbock Texas
I am a new hobbyist and had a mini mill for one year and already have a product that I sell in small numbers. Thank you for taking the time to explain everything you really are a master in your field, only draw back is you make everything seem so easy. Keep up the good work.
The amount of stuff I learn from you and other machinists while my code is compiling is really great.
I picked up a used Enco 14x40 lathe - let's call it a "Model 221" - for a song a few months ago and the wife let me put the three quarter ton monstrosity in the basement.
Between you and some other great instructors on CZcams, I'm able to get home and make something out of steel rather than just software.
Thanks for all of that.
That might have been 221 times more useful than I expected. Always interesting. Thanks
Work nights, up all night on the weekends, spend them learning. As an electrician by trade, 220, 221 it is all good! Keep them coming, look for them every week.
Thanks Joe for all the time and effort you put into your videos. I could watch them for 221 minuets a day.
Joe, you have 221% of my attention with your content!
You have increased my machining knowledge base more than 200 percent (221%) percent...... thank you for all you do.
Thank you for fantastic tip number 221! Another great video.
I'm not usually one to comment but after watching 221 of your videos I thought I had best make an effort . Keep up the great work Joe
A big selling point is which one you want to build. The enthusiasm you had for the lathe was very infectious so the one you want to build is the one I want to watch being built!
I do dream of owning a Shaper one day, but when I get to that day it will also mean I have already acquired all the other, arguably more useful, tools, like milling machine, band saw and possibly even a wood lathe too. But as This Old Tony put it: It's like watching a camp fire.
Joe Pie. Just wanna extend some due gratitude's, been watching your channel for a few months now and I have learned not only some great tricks and techniques, but your ability to see things from whatever angle and paint a clear picture of each process supportively towards all skill levels.. well I have really gained huge in my overall perception of the sport.221 Great Job! Thanks Joe!
Glad to help. I hate to see guys struggle. If you ever have a particular issue, feel free to ask a question. I'll get back to you.
There are 221 reasons why I love this video.
Great content Joe. I learn more from your postings than from any of the other 221 sources I follow :-) I also appreciate your attention to safety in your work. Thanks for taking the time to share your knowledge with us.
Excellent demo Joe. Thanks Peter
Thank you for one more of the 221 really useful tips from your bag of tricks. I would probably have never thought of this one. I'm really thankful for you and Tom, Abom, Keith, Mr Pete and all the other machinist posters on here that are so gracious with your time and knowledge and sharing with us. I work in a CNC shop , but I do some fabrication and machining at home and have learned a ton of tips from all of you. Thank you. Dan
I have a friend who is a retired shop teacher. He told me about your channel a couple of weeks ago and I'm really enjoying it. 221 Thanks for all the good stuff.
Another hungry 221.
Joe, Every second of videos contains so much information. Thanks again for all you that you share.
Always watch your videos to the end. You're a great teacher. I hope you make at least 221 more.
You are one smart Guy Joe!!!! I still needed to watch it a few times though lol (I am a Newbie) when you took the part out I thought Oh crap now he'll have to do it all over again! I am always learning- you are a Great Teacher Thanks for posting two thumbs up
I was born into a Machine Shop family in NC and started when I was 9, Iam 62 now and I have learned some Facts & short-cut tricks from Joe. I have so enjoyed watching and would like to meet you and just have a long Southern talk with ya Joe . Thanks for sharing your knowledge! Pete Dawkins...221
Thanks Pete.
Would love to see that tool grind you used, shredded with that downfeed, was that the 221 grind?
Joe, another great video 222 !! having just been given a lathe / mill combo (not yet installed ) this has shown me a very simple method of doing this type of work with a fly cutter thank you for your great videos. From the U.K. I salute you!
Once again, awesome, innovative, ideas, 221. I've been avoiding setting up fly cutters off of the machine for years, because of the difficulty in getting an accurate setting just by trail and error. It would take me a long time to get it right, so I would just do it in the machine, and avoid getting the tool set up off machine before hand. I never even thought about using a V block and the dial indicator set up vertically. DUH! (slap forehead). So obvious once you know it...
Thanks again.
Ken
Man I started watching you just recently but I already learned about 221 new tricks. It all seems so easy and logical when you show it. Thanks and hoping to see more!
Insomnia is horrible! Your videos are wonderful and always a learning experience. 221
I once needed to make a 20mm hole in some part at work, had no 20mm drill, the only 20mm endmill we had didn't fit in the collet (very old crappy Polish collets and the shank was over 20mm) so I grabbed some steel rod, turned half of it to 20mm to hold it and the other half smaller than the next smaller drill I had.
Cut a slot in the end of it with an angle grinder and files (no way to mount a saw on the mill we have) and drilled and tapped a m3 or m4 hole perpendicular to it
I cut of a short bit of and old 5mm HSS turning tool and ground a new cutting edge, put that in the slot, hold it down with a setscrew, plunge on the mill into a predrilled hole, adjusted the cutter and did all the other holes
Guys at work were surprised my scrap metal tool worked
Necessity is the mother of invention.
Listen Joe I got some things to say!!! The videos you post are the best machining instructional videos on the internet, that I have come across!!! You are knowledgeable, you know the trade better than 99% of people out there, and more importantly, you can effectively explain concepts. You explain the math behind things, you draw it out, and give physical demonstrations, everything that in my opinion is enough for 99% of people to properly understand. As a fellow (although young) machinist, I am always enthusiastic when you post a new video, due to I walk away feeling as though I am now more skilled. You are passing on the knowledge you have gained through years of experience, selflessly, which in my opinion is one of the most honorable things someone can do for another person, let alone a bunch of strangers on the internet. All that being said, keep the videos coming, 221!!!
From one of your many students Bryan.
As always, great stuff!. You've inspired me to re-wire my lathe motor to run on 220, 221, whatever it takes!
Thank you again for another excellent video. I am just a wekend warrior/homeshop machinist but you just gave me another 221 reasons to watch every single one of your videos.
Thx,
Bernhard
Wow! I 2 had never thought of 2 using a fly cutter 1 for that. As usual, your teaching style is excellent, with little side comments that teach much more in addition to the main topic of your videos. Thanks!
Thanks for passing along your wisdom Joe. Speaking of passing, my dad used to own a '62 Ford Fairlane that would pass a lot of cars due to the 221 V8 under the hood.
2:21 am and it isn't a school day and I haven't finished with the Internet yet. Interesting as always. Dead simple technique, AFTER you have shown and explained it. Thank you Joe.
I'm not a machinist, nor do I have any really cool milling or turning tools. But I sure enjoy watching skilled people make cool stuff on channel 221 of the CZcams. Thanks, Joe!
Every time I watch one of your videos I learn something new!
Thanks for every one!
I'm certainly glad to have found your channel. I've been machining for the better part of 50yrs and gunsmithing as well and I have learned many useful techniques from your videos. Thank you, KB
Thanks for watching. You may enjoy the AR series if you are into gunsmithing. Take a look.
221 Another great tip. I get up around 3:30 each morning, get my coffee, get my pad and see if there is a new video from Joe Pie. Thanks!
Another great video, never would have thought of this trick. Thanks for your time and effort. I know as a business owner, you could be spending the time with anything else but you choose to teach us your tricks. It is very much appreciated. NJ 221
I am a newbie to Machine working. And at my age 65+ I feel sometime it is a little to late but the way you do things is really teaching me a lot. Thanks 221 I will always watch your videos...
Wish I'd seen this a week ago. I just did the guess-and-check like chump. Thanks for the video!221
Thanks again Joe for taking the time to teaching us mere mortals. I learn so much from your vids.
Thanks for sharing a life's worth of experience with us Joe.
That ROT t-shirt reminded me of when I dislocated my shoulder :D It wasn't ROT related. A friend and I were riding back from Johnny Cheese Performance during the ROT weekend. To make a long story short, bad road, sharp curve, new rear shocks, tree :) bail... The ROT had most of the hospitals and almost all of the ambulances tied up. It took forever to get transported and even longer to get looked at. Ahhh the memories :o)
221
I'm a dummy but every time I watch one of your videos I get just a little bit smarter. Thank You. If you keep making videos and I keep watching maybe one day I'll have an IQ of 221
Joe, just enjoyed another interesting machining method, and I keep enjoying your 221 ways of presenting each video. Thanks.
I needed to set my fly-cutter (or boring head) to 2.221 so this video was very timely. Keep up the good work.
I think you are 221. I have learned so much watching your channel.
THANX!!!
Been awake for about an hr, the sun is up enough to go out to the shed now. There has to be at least 221 applications for a precisely set dia or radius for shop projects or jobs.
I use a similar tech to the second one but I like the simplicity of the first as it can do different dia's without taking the tool out of the machine. Thanks for that Joe.
Cheers from John, Australia.
Thanks John.
Great videos Joe. I think I’ve watched 221 of them now. Keep them coming.
Hi Joe, thanks very much for sharing your knowledge and experience. I know it takes a long time to set up, film and edit videos but if people like you were not prepared to take the time and effort to show others their knowledge people like me, who are trying to learn to machine for a hobby and have had no formal training, would rarely succeed. Thanks to your help I have more confidence to try things, and your solutions (together with the fact that you take the time and effort to show multiple ways to solve a problem) are a godsend - especially when you don’t have all the latest gear and can’t afford to break things trying stuff out. I’m sure I’m not alone when I say how much I appreciate the videos that you put up, and the fact that you invest your time in helping other people without expecting recompense. We could do with a few more like you out there - at least 221 more would be good! Please keep it up, and continue to share what you do with us. Thanks very much, Nick (Nottinghamshire, UK)
Another great video Joe. My wife is getting tired of the 221 videos of yours I watch lol
Joe , as always great information and delivery. I've only got 221 more videos to watch before i go to sleep .
221 I am a gunsmith who is trying to expand my knowledge in machining beyond what my job requires. You are my go to buy for stretching my boundaries. Thank you.
Thank you. Glad to help.
For the 221st time you have taught me something, Thanks Joe
Thanks Joe,
I'm a beginner home hobby machinist with a Smithy 1324 machine. I learn something every night while watching CZcams before I go to sleep.
Please keep up the good work teaching!
221
Dave
I've always enjoyed learning a new technique and adding something to it to take it to the next level. Thanks for watching.
@Joe Pie Thank you for another exquisite lesson. I've been struggling to find root cause of shallow cut, muddy finish for the last four hours and I think this vid pointed me to a preload problem (spindle bearings bouncing). I'm going to 221 sleep now, as instructed, and recheck planar finish after I tighten up the central axis.
I have been watching dozens of your CZcams videos on my smart TV. I am not logged in on the smart TV so you get no credit for me watching them. I am not a garage machinist but I got the urge to buy a Chinese mill machine and Chinese lathe. I use to deliver bars to machine shops in WI, IL, IN, OH, and MI. Some shops were small and some shops were very large with the latest in CNC. I marveled at all the stuff they could make out of the material I delivered. I bought a fly cutter and wanted to make a hole of radius .8125 out of two pieces of aluminum 1 inch wide and 1/2 inch thick. Each part would have a 180 degree arch and then be bolted together to fit on the yoke tube of my 1961 Piper Comanche. Attached to the aluminum is a ball mount that attaches to a Ram mount that holds my Android running navigation software. I do not have a digital read out. As I struggled with the project I finally got the hole carved away. I probably did everything wrong but I think it will work. I have not had the time to check the fit on my Comanche. I need to get a stone cutting tool to dress the stones on my craftsman grinder. The hardest part was cutting a HS steel tool on the grinder. I painted the two parts to be machined with the blue stuff and gradually worked the fly cutter to the proper circumference. Took me hours. I remember you saying not to wear a watch so I took my watch off and lost track of time. Thanks for all the info you give. I easily get overwhelmed. Regards, Fred Z, Orland Park, IL
Thanks for the feedback Fred, I am glad my material is helpful. Feel free to ask a question if you ever get jammed up.
Exactly the video I was looking for. Thanks so much!
I really needed that first technique a few months ago cutting some large approximately 221mm motor risers for a machine. Spent an hour slowly trying to sneak up on the right fit. Thanks as always for the invaluable advice.
Great video Joe. Have learnt a lot from your channel. 221
221 your videos are the best on YT, I always learn at least one thing from each of them
Happy to hear that!
Great tip Joe. I actually have a job this week that requires a precision radius to seal. I’ve struggled with this in the past, so this will help me out a lot.
Short, sweet and to the point. Can't wait to watch the other 221 videos. Thanks Joe!
Thank you for adding another technique to my utility belt of tactics, now there must be at least 221 of them. These techniques make such a difference to a single maker who needs precision but sending out, cnc or employing some one are not in my budget. Thank you for sharing!
Great Joe : All your videos are very informative and useful to understand how the real "metal world" works. Thanks for sharing your knowledge and, of course, I have a CCXXI too in my box ! Cheers from Spain !
Thanks.
Thanks Joe. Took a few minutes to grasp how simply you completed this process. I had to rewind and walk it through. Finally it sunk in that the edge finder was centered on the part edge and you walked the flycutter out to establish the radius. Very fast and accurate.
_Dan_
You got it.
You continue to amaze me with the breadth and depth of you knowledge, I maybe you have shown 221 way to do everything, Keep it going many many thanks
I, too, had a two hundred and twenty one moment on this one. And, the video was again useful and well done. Thankfulness brimming over here.
Thanks for the 221 great videos Joe. This is a method that I had never thought of. I'm always trying to learn more about this machining world and your videos have been a real help. Keep up the good work!
Thanks Joe. I used a variation of your method years ago on a job. My college instructor told me this job (one off, odd job over the summer for my old highschool chemistry teacher) couldn't be done without a CNC. That only made me more determined. With a fly cutter and a .250 carb endmill I made the whole job happen. I measured the diameter of the quill of the machine and then with an indicator got the diameter true to within .001" of the nominal, but also had to have a dead flat bottom so I used a left hand, carb inserted lathe tool to true the edges and then blended in the remainder of the bored with the endmill and stoned it smooth. Thanks for sharing this with everybody! 221