TRY THIS HACK FOR BETTER POUROVERS: Samo Bloom
Vložit
- čas přidán 30. 06. 2024
- Head to www.squarespace.com/lancehedrick to save 10% off your first purchase of a website or domain using code lancehedrick
What are your thoughts on the Samo Bloom?
Tell me your experience after trying below!
I wanted to post Rubens Gardelli's 2014 World Brewer's Cup Championship Routine below as he figured this out in 2014 AND postulated his 62C bloom aided in maintaining delicate aromas. Little did he know that science would prove his thesis about a decade later!
• 2014 World Brewers Cup...
LINKS
__________________
Join my Patreon community at:
/ lancehedrick
Find me on IG at:
/ lancehedrick
Find me on Facebook at:
/ lancehedrickcoffee
My storefront: www.amazon.com/shop/lancehedrick
__________________
TIME CUES
0:00- Introduction
0:45- Explanation
2:35- SquareSpace
3:44- Volatile Organic Compounds
11:07- Recipe for Skippers
12:44- Taste Test - Zábava
NOTE:
There have been people rightly claiming this practice of cooler blooms has been done before. Likely, most odd things with coffee one can think of have been done before. What has NOT been done before is theorizing with scientific proofs what happens with cooler blooms. Hence rewarding Samo with the name Samo Bloom. In his defense, he was hesitant when I asked if I could name it after him, but just like in the scientific community, one tends to name a theory or practice after the one who sets out to prove cause and effect. Dr. Smrke is the first and only to do this.
While I know many Johns and Janes have done this in their kitchen while I was in elementary school, the theories were all different and, in the end, steeped (pun intended) in speculation.
So, call the bloom what you like, but I'll be referencing it as the Samo bloom crediting the one figure we can know absolutely played a pivotal role in its expansion and subsequent widespread adoption.
Thanks for reading. Much love and brew something tasty ❤
Lance, obviously I think everyone here knows that, and no one is speculating that what you're showing is a unique find.
But the nuances and studies carried out by each of those who have used this type of method or similar, provide understanding and improvement in general.
Keep up your work, excellent as always!!
Somewhat. I've seen some explanations that are flat out wrong. Only one I know of argued the only reason was retaining aromas, and I've linked it in the caption. But none gave any credible scientific underpinnings.
The reasoning is similar to those that will brew cooler water at the end because it lessens bitters because less heat equals less extraction. This is an unfounded thesis that is arguably not true if you brew hot at the beginning.
agree@@LanceHedrick
Out of curiosity... because seeing this brought a thought I'll try later... (assuming you may have already done it ) pre soak the grounds in cold water and chill the filter, before bringing it back to the counter for a 92 C pour ? Excuse if this sounds silly
I think it's shunned upon in the scientific community when scientists name things after themselves. That being said someone else naming it after the person seems respectful
Made it in written form for myself, so might as well share it :)
*Samo Bloom Technique for V60*
*Ingredients:*
- *15g* coffee, ground medium-fine _(slightly finer than typical V60 grind)_
- *250g* water, divided into two temperatures:
- *Initial Bloom:* 50-60°C
- *Subsequent Pour:* 95°C
*Steps:*
- *0:00**:* Pour 45g of water at 50-60°C for the bloom.
- _Immediately after pouring the 45g:_ Increase kettle temperature to 95°C.
- *0:00** - **2:00**:* Bloom phase
- *2:00** - **2:20**:* Continuous pour phase. Use these checkpoints to guide your pour rate:
- *2:05**:* Total water should reach 100g.
- *2:10**:* Total water should be 150g.
- *2:15**:* Total water should be 200g.
- *2:20**:* Finish with a total of 250g.
- *2:20** - **2:25**:* Gently swirl.
*Total Brew Time:*
*Approx. **3:30**.* _Adjust grind for taste/time. Too fast/acidic = finer; too slow/bitter = coarser._
Edit: Pour duration was wrong, thanks for pointing that out @pszemysuaf. Fixed now!
Thanks. Short attention span, quickly scanned the video for the recipe to try out the technique but the overlay was lacking some details.
@godil496 well, I worked for a while to make a 15min video. I think it wouldn't kill you to give up 15min. 🥰
@@LanceHedrick It was a great watch, thank you for the video😄
@BennyBanano1 10g/sec flow means you should run the main pour in ~20 seconds, not 40sec. Otherwise, an awesome effort mate! Cheers
Thanks @BennyBenano1 I watched the full video but I'm new to the pour over game so a reference text is very useful!
Just made a cup of pourover and sat down to see Lance uploaded a video about making better pourovers..... Guess I'm doubling my caffeine intake this morning
Literally me
It was the first cup you needed to be able to follow all the scientific rationale 🙂
Ha. Same.
Same here! I'm on my third pour over today now because of this video 😊
I just drank 2, saw this vid, making my third, bye bye sleep
Best. Ad. Transition. Ever.
I can never say no to pour over videos from Lance
I just never say no to pourover 😂
Just a thought for us US 110v people.
When your kettle gets to 70C/160F pour some of your brew water into a steaming pitcher, (how much you want to use for your bloom) When your kettle is up to temp your bloom water will be around 50C. Adjust the temp you pour off into a separate vessel accordingly. Or if it’s too cold when you want to brew, pour some of your kettle water into your steaming pitcher.
Yes, this works perfectly for 110v. I only have one Fellow Stagg electric kettle and an old stovetop gooseneck kettle with built-in thermometer. I heated my Stagg up to 70C/160F then poured my bloom water into my stovetop gooseneck. Then I continued to heat up the Stagg to 95C/203F. Started my pourover/bloom with the stovetop kettle at about 55C for about 1 minute. Then finished the pourover with my Stagg at the 90C+ temp. Lance is definitely on to something. I noticed a better flavor profile. It brought out the cherry and dark chocolate better in my Onyx Costa Rica Francesca Chacon roast, than my previous brew method which was at the 95C/203F temperature all the way through. I used the Next Level Pulsar (Gagne's awesome invention) and kept the release valve open during the Samo bloom. Then closed the valve and did an immersion and finished with percolation (steep and release). Still a lot of great things to experiment with to see what kind of cups I can produce. Cannot wait to dive further down this rabbit hole!
I simply poured the bloom when the water hit 160 and then let the kettle continue to come up to temp during the 2 min bloom.
But this way, I don’t get to buy a second kettle, sad for me and the kettle industry
@@kaypee1972 True. We should all do our part to keep all those folks employed :)
This actually changed the way I brew coffee each morning. I can only describe the result as "less harsh". It softens everything bad but leaves all the good in it. Thanks for the tip!
This is a fun one my dude!
After hanging with Samo that week and watching his lecture on aromatics being percieved higher in low temp brews, I have been exclusively brewing with lower temps. The aromatics have for sure improved and I have seen much cleaner finishes. Though this is a great answer to that as well! Gonna go get sick off caffeine because of you, you scumbag.
For pour overs, you're doing the whole brew at lower temps, what's lower temp for you? I just started getting more into pour overs recently, do you compensate for the lower temperature? I think you can make up for the lower extraction from lower temperature by doing more pours (like 5 smaller ones), also I noticed your brew water can have a huge effect on how effective it is at extracting. I was using tap water which is pretty hard here and was using a higher temperature for pour overs (with 1 bloom + 2 pours) and it was working out fine. I accidentally got some Dark Roast Profile Third Wave Water and decided to try it (with light roast pour over!) using the same temperature It was turning out bitter and over extracted, I was thinking the dark roast profile was just bad for my coffee at first, but then I tried lowering brew temps a good 10F and it was good again! So seems like it's just more efficient at extracting. I remember I had a similar experience for espresso with the espresso formula, using half strength works better for me otherwise it seems too easy to over-extract.
Hey Lance - thank you for this great step-by-step video.
Here are the steps as I understand it for the chilled bloom pourover recipe:
1. Set kettle temperature to 50°C
2. Weigh out 15g of coffee grounds
3. Bloom with 45g of 50°C water (3x coffee weight)
4. Let bloom for 2 minutes
5. At 2 minute mark, pour water to target weight of 250g with 96°C water
6. Give one swirl at the end to ensure flat bed
So in summary, the chilled bloom recipe is:
- 15g coffee
- Chilled Bloom: 50°C water, 45g, 2 min
- Pour to 250g total weight with 96°C water
This low temperature blooming technique was used by 2022 World Brewer’s cup champion Shih-Yuan Hsu(Sherry). It does bring out different flavors. Thank you, Lance for sharing it so more of us are motivated to try it at home
Thanks Lance, always helping us think critically, evolve our methods, and chase that 'perfect' cup!
Just used this method. Absolutely love it. Fantastic! Thanks for all you do Lance!
Tried a both 60° and 70° bloom of 2min on a washed Myanmar coffee from my local specialty coffee.
Rest of the brew with boiling water.
The results were truly great, way better balance of both acidity and sweetness. A lot more flavour in general too !
Thank you for sharing Lance !
wow... it really works. In the past I have tried cooler temperatures to taste more of the delicate notes, but that ends up being under extracted overall. But this method makes the final coffee tastes so much better. From my unscientific experiments, this works better with lighters roasts.
Thank you!
Thank you for sharing!
I enjoy the science side of these things, and I also appreciate that you give credit to others and don't overstate your claims.
Hello from France ! I tried this with 40°C for the bloom and it's very interesting how different it tastes. Much more herbal, it feels like you taste a aromatic smell. I tried with a medium dark roast looking forward to try it with a light roast ! Very good video, thank you Lance.
Im really enjoying the start of 2024. You're knocking these out the park there Lance. Thank you for you❤
Blooming colder is a definitely great way of getting a better tasting cup on unevenly roasted & blended coffee or for beans that have sat for a bit longer. Especially if those coffees are on the lighter side of medium and could benefit from higher water temperatures to extract well; the overall perceived bitterness or toastiness may be less noticeable. I've been doing this for some time with pleasant results. Great videa Lance, you always think outside' the box!
Awesome vid as always, thanks for this nice Tuesday gift! I'll be trying this out right now
That was the best transition to an ad roll I have ever seen. Well done!
I’ve tried it for the last few cups I’ve made and I am definitely a believer! More flavorful, vibrant cups and a lot of the harshness isn’t there. Love it
Had a reason to make myself two extra pour overs today because of this video 😁 ty Lance
Ok I am never going back to how did pour overs before this! Each cup I’ve had since incorporating the samo bloom has much more flavorful and nuanced! Game changer!
This is awesome, can’t wait to test this out
Lance, Lance, Lance! I took your method and adopted it to the cupping style “french press/cowboy coffee. I did a 1:17 where I started with 20g of coffee with a medium-medium fine ground and 100ml at 60C water in a largish vessel and then poured the remaining 240ml of the 340ml at 100C water. let it steep for 4-5 minutes before breaking the crust and another 12 minutes of steeping before pouring it in a mug. The taste was divine. The mouth feel, after taste, and notes were very lively.
Ok, I have watched many videos and tried a lot of things. But this had the most profound effect on my coffee. Coming from the beer world I really dig aromatics and this technique has really helped me improve that, I now have way more perceived aromatics than before. This is even more profound in freshly bought coffees. I do this technique in an aeropress and the amount of off gassing is so much reduced. This and my new grinder (df64 gen2) has finally giving me the cups I wanted.
Beginner in doing pour over's here. ;)
I gave this method a try last night (I normally to 4:6method)... wow. what a difference! I used a light roast from Peru, it described "milk chocolate, the juicy citrus and the sweetness of blueberries", never really got that out of it, until i tried this method. I used 56C bloom, which took about 2.5min since the boiler wasn't yet hot enough for the 2nd pour ;) Then did the rest with 96C. (used: 1:16 / coarse grind).
Thank you for sharing! Love your video's, keep them coming!
Really enjoying this method for a darker blend I picked up. Thanks!
Holy smokes, I thought I was the only one to try doing this. I of course did not think of all the Sciencey stuff, but the idea did pop into my mind and I tried it. Not something I do much but once in a while when I'm feeling creative I try it. Now I will have to try it again just like this.
Thinking outside the box, love it! Thanks!
Very effective! I’ve had a nice coffee that I felt was just a touch too far into the fermenty side of things for my taste - this bloom almost completely eliminated that element of the cup, fantastic!
In practice, I’ve been heating my kettle to full temp and then pouring enough to bloom into a smaller little glass cup with a spout. Seems to cool the water to the right temp fairly quickly (30 seconds or so? I checked with a thermometer the first time and it came down to about 65°C quickly) and the spout lets me pour well enough for the bloom. Then my kettle is hot and ready to go following my bloom (I’ve been blooming for 1 min lately).
Thanks for sharing Lance! This method was quite effective.
Just brewed up a washed Colombia in the April brewer and this method worked well. Definitely noticing more sweetness. Will be trying this more often!
Can you share the recipes with the temperature? Thanks!
I have done cold blooms in my aeropress for a while now...and while it felt so wrong because it goes against most things taught, the results are amazing. I use frozen beans as well.
Always go for taste!
How cold do you go, and how long do you bloom for?
I just tried this using Black and White's The Natural and it was incredible. Tasted exactly like it smelled!
@@Enn- I use room temp water first then heat the water and finish it.
It taste notably different meaning better when you use cold water bloom.
I am not the only one who thinks so either.
Whether or not there is volatile organic compounds in cold water brewing is still un proven,
It does not mean it does not contain VOC's it's just yet to be proven or disproven that I am aware of..
May be OP will acknowledge cold water bloom improves over all taste may be he never will either way it does not matter.
Interesting hypothesis, I'll definitely be trying this out on my next few pour overs!
Tried this with my aeropress a couple years ago for a competition. It worked very well with that particular coffee that year.
Blessings to you, bro Lance!
I tried a 60c bloom for 2:30 before pouring the 92c steady pour for the rest.
I used a very fresh roasted washed Colombian coffee.
I poured out the bloom drippings before finishing the pour.
It's unbelievable how SWEET this cup is! It seriously tastes like I've added liquid sugar to it.
WOW! Excellent flavor IMO
Thanks for the encouragement to try the low temp bloom! It's gonna be my go to... till something even more awesome is found out hahahah
I've seriously never tasted a sweeter cup of black coffee ever.
So the one pour with a stir works really well for me. Quick and easy and tasty
Really excited to try the Samo Bloom :)
Just tried this with a pacamara natural heavily processed that I’ve been struggling with and it was great! More balanced and even sweeter than the control. Definitely try it out!
Medium grind (25 clicks on comandante)
Origami with cone filters
15g : 250g
65C and 97C
2:15 tbt
This is brilliant, do it, thanks Lance
Thanks for the video, Lance! I recently had a similar experience with the French press... After adding the water, I immediately put a small cup on top as a lid. After 4 minutes I wanted to break the crust and wait another 4 minutes before pressing down the plunger... then I noticed that the water vapor condensing under the cup smelled sensationally good... and tasted - yes, I tasted it. Since then, I've always brewed French Press coffee with a funnel-shaped lid to channel the condensed water vapor into the drink. I have the feeling that the coffee tastes much better now... but I have no idea whether I could manage a blind tasting ;-)
Oh, that's neat! Would be really cool to do a formal study with this technique.
Recipe worked great with Gatina AA from Prodigal! Super clean with more pronounced flavor notes!
what was your grind size?
You can boost the effect by using a dispersion shower like the gabi Master B or the Hario drip assist, for the blooming. Lower agitation works great if you want those VOCs to reach the cup
This is by far, the best hack I have read/watched a video of. I have not gone nuts and experiment with different blooming times. I kept it simple and followed your recipe with the 2 min bloom, and I got a say that I have been having very nice balanced/round cups of coffee. Truly grateful for this @LanceHedrick . Also, perks to the guy who recommended to just pour some water into a milk pitcher in order to not have to wait that long. It is a nice hack, a little inconsistent, but IMO it works out perfectly fine when you are brewing at 6am in the morning.
I like the idea of making changes to the bloom for dial in and always pouring to final weight at a set rate. Allows for a finer grind and I think contributes to consistency
Love this, I’m def going to try
Thanks for another great video 😊
Just tried repeating your recipe with a lovely washed Tanzanian from Pharmacie Roasters in the UK - it's been a really lovely bright coffee with lots off zing from the hibiscus notes. The cool bloom totally changed it - much lighter and more tea like with and intense sweetness. I got an extraction yield of 20.33 % - Can't wait to try some other coffees.
Another banger, Lance. I'm going to put my science hat on tomorrow am.
I am not sure if I am in pure placebo land right now but for the last few days I have brewed with this method exclusively and have been really enjoying the coffee and perceive less bitterness overall.
This actually came at a nice time for me as I had a coffee that I wasn't overjoyed with but now I am finding nice acidity with this method.
Again, this could be the Lance-effect but so far really enjoying the method!
Thank you, what a wonderful method to brew coffee. For anyone reading this, you gotta try it
I cannot adequately express in words how much I loved the transition into the ad. *slow clap*
Dude you are so hilarious, I loved your impression of the character in "Let's get our boiling water and... 😠 punch them out of the grounds!", watched it so many times 😂
Also the Squarespace one was great again, and of course the interpretive dancing 😆 Brilliant! Please keep doing this!
And also thank you for coining a new term. I think the coffee world will really benefit from people experimenting with this, and also from Samo getting more exposure!
I'd love to see experiments with different variations of cold(er) bloom, hot first pour, temp drop second half and/or immersion, etc etc ...
I'll give this a try tomorrow morning! Very interesting. :)
This reminds me of something I tried a ways back where I used a small ice cube as part of my bloom water mass. I ended up forgetting about that experiment when my workplace transitioned back from remote to in-office, and ADHD kicked in. I may need to bring that back out.
Congrats on 200k!
Bought steel balls waay back from Aliexpress but never use them bacause they're really messy to deal with.
Now I'm sure this I could do even right after when I wake up 😊 Thanks always Lance
Your squarespace ad transitions have been on point Lance 👌.
More on topic, I'm excited to give this a try! I just got some new coffees in today and I'm going to have to have a tasting this weekend to compare different bloom temps to see if I notice a difference from temp to temp (going to try 50⁰ and 70⁰ against my usual 94⁰), as well as the workflow difference. At least that's my interpretive dance interpretation of yours I'll be playing with 😁.
As always love the nerdiness, the deep dives, and the fun ideas. Keep up the great work!
The translation made me feel violated
It's 7:30 pm at the time of seeing this. Can't wait to try tomorrow.
Also want to try this in my Flair 58. I figure you could partially fill the brew chamber with 60-70C water, press it through for a bloom. Then with the brew chamber "closed," fill the chamber with 90C water, lift the lever to fill the chamber and finally completing the shot by pressing at 9 bar.
Wow super interesting, definitely gonna try that on my next brew 🤗
I did in fact brew something tasty today Lance, why thank you. Can you do a video on why the Mocca Master makes such darn good coffee? It just rocks
I loved the way you introduced squarespace 😂
Cold water blooms work wonders for espresso! As a runner, astringent coffee triggers my acid reflux, making my morning runs a challenge. But thanks to a friend's recommendation, I tried this technique cold water blooms in my morning espresso. And let me tell you, since I've started using cold water blooms, my espressos have become noticeably smoother and more flavorful. It's interesting how the flow rate can vary depending on the bean at times slower which was very much unexpected. I've been on a journey of experimentation, playing around with different water amounts, temperatures, and bloom durations. And now, as my pre-run drink, I've found the perfect combination: tepid room temperature water, poured about 1.2 ounces using puck paper and metal puck screen. Sometimes pouring water just over the puck paper or over the puck screen. It's a game-changer that not only keeps my acid reflux at bay but also fuels me up for an enjoyable and caffeinated run.
I like this! I did 50 C then my kettle got up to 93 C right as the 2 minutes were up. Need to grind a little coarser next time, I had a bit of stalling. I was able to drink the cup right away too, which was my favorite part. Usually I have to wait a few minutes (because the coffee is too hot).
It’s nice to see that Aram behind you. I’ve had mine for years and much prefer it over an electric machine. The texture!!! They recently came out with a gauge for it too! I know it doesn’t have burrs but I’d really love if you could make a video on it. Thank ya!
Brewed a Natural from Costa Rica today and it was a heavily floral aromatic brew. Lacked body, but maybe because I was at 27 clicks on my Comandante. The bed wasn’t flat after swirling too, so things to note for next time.
Defo wasn’t as funky of a coffee using this method, but defo pulled out a cherry blossom floral like taste.
Lacking the sweet strawberry note I had before when blooming at higher temp…and also lacked a honey finish which I was experiencing before too.
Will adjust variables for next time and see how we do.
Total brew time was 3:20
I just got a v60 yesterday, tried your 2 minute bloom recipe and used only used pretty warm water for the bloom because that was a little more convenient and I thought bloom temp wouldn't mske that big of a difference, then sit down to drink my delicious cup only to stumble across this video lol
Ahhh, the power of 220V 😎 Kettle's boiling in half the time compared to the US! Also, missed opportunity to dance the Samba Bloom 💃🏼
Nice hack Lance ! Tomorrow I need to try the combo 60c bloom + chill rock 🤣🤣
Smooth transition into the sponsor, really smooth!
Loved this! My Ethiopian got heaps more chocolate at 70C bloom. Thanks LH 🙌
Tried out sometime ago and ended up working great with some coffee but not big differences with others, as you said basically with the froze balls. Although I have found some differences especially in aromatics when I’d cover the whole bloom phase and whenever I wasn’t pouring with a lid. Might try to connect both and see what happens.
Thanks Lance!
Very interesting. Cold bloom is been used in robusta brewing for a bit to remove the more nasty parts, and the bloom is thrown out.
Excellent. I was looking for an excuse to have another coffee.
My wife is like... Why are you having coffee just before dinner?
Me.... Lance told me to.
Wife... OK
Bliss
Tried room temperature bloom and it was weirdly quite good! Needs more experimentation with some lighter roasts but will have to wait till the weekend.
👍Lance
Wood and black on a espresso machine looks amazing, now we get lance in brown and black in a vid. Looking good brother, keept he 🔥 content coming 🤌🤌🤌
The transition to the sponsor ad was just... * chef's kiss *
This was a great experiment! I tried the following recipe and couldn’t believe my taste buds:
20g of Colombian Geisha (double anaerobic washed) by the La Macarena Farm in the Cauca region with 340ml water
70C/158F of 60mL Bloom
100C/212F of the remaining 340ml
Thanks you very much for all your work there !
For the Samo bloom, a transcript of the recipe could be :
Overview :
* 15gr coffee
* 250gr water
Recipe :
1. Start timer & bloom with 45gr of water at 50° or 60° or 70°C
2. Replace kettle and get 95°C water during blooming phase
3. Pour remaining water until 250gr at a flow rate of 10gr/s
4. Make a swirl at the end
5. Total brewing time should be ? Maybe around 2min45 and 3min30
Edit: it is the 121 method explained here czcams.com/video/rAdgJNK0csc/video.html
Is there any way to adapt method to aeropress, it could be also produce great cup.
You dont need to reset the kettle temp, just take it out of the base and then put it back (set for 95). At least, in my timemore kettle, it works automatically.
@@3dus I've a classic Hario kettle without temp control, I guess that it is more easy to let the water being hot, pooring ~30gr in a jar with a kitchen thermometer, adding room temp water until it reach 60°C, then you have both semi hot carafe and your hot kettle ready for extraction!
didnt he say 2 minutes bloom ?
Tried this with the washed Colombian fellow drop from 3 or 4 weeks ago. I’ve been struggling with this coffee as the extraction was taking about 5 minutes. Surprisingly still tasted good but a lot of body and the florals and aromatics were muted. The sago bloom made this brew perfect. Kept the beautiful chocolates in the body but brought out all the grape acidity and floral aromatics it was lacking. Still a 5 min brew but don’t really give a damn. It was amazing. Grinding with a orphan apex on minus 4 clicks. Bloom was at 145 f and brewed at 205 f on a stagg x brewer. FANTASTIC!!
I have just tried it with my decaf (already late here in Europe). I must say it is very promising. Decafs that I usually get are not super light roasts, rather closer to solid mediums therefore even if I brewed it like with 90 degrees water it still gave me plenty of bitterness with occasional fruit notes if I am lucky, but that was good enough for me providing it is not "real" coffee. But with this method, I feel a lot less bitterness and more pronounced fruit notes. HOWEVER, the most interesting thing for me was that when I finally hit that bloomed puck with hot water I had a MASSIVE PUNCH of sweetest cherry aromas evaporating from that coffee into my face, and, unfortunately, disappearing forever. I am wondering, if you actually need a second bloom with that "colder" water to actually try to wash that off and dilute into the brew before hitting it with a hot one? I will try it next time
The natural path here is brewing with cold water 😂
I tried the Samo bloom this morning with a really interestingly processed Colombian orange wush wush from Coffea Circulor--used 60C for the bloom and the results were absolutely undrinkable haha. The front note had a kind of astringent pungency that reminded me of eating dish soap. However, the taste on the back end was sweet, and floral.
Ended up giving the cup to my wife (at her insistence we not waste the beans) who uses half-and-half and it was far more palatable.
Will definitely try this with something less exotic and see how the results differ.
Thanks for the experiment!
That result is not from the cold bloom lol. The VOCs maintained are maybe a 5% bump. It can be detected but not overwhelming
Just tried this out: 20g:300g with a light roasted Kenyan mixed SL28, SL34 and Batian varieties, 50g bloom at 50C with a stir, then 150g and 100g pours with off-boiling water. One of the sweetest cups I’ve had from this coffee without any bitterness or astringency, but couldn’t taste the flavour notes until it cooled right down. Definitely an interesting way to play with the bloom, I’ll keep at it!
Very new to the world of pour overs and have been trying to get a better cup out of medium to darker roast (light roasts seems good) this technique seems to be key as a way to control the extraction to keep the bitter under control well worth trying seems to work great
Wow! It's kind of a lot to take in. Can't wait to try it in just a few minutes.
It's funny and interesting that quite time ago I studied some cooking basics and I remember the importance of low temperature while making an awesome broth, because when you exceed 80ish degrees (I can't remember exactly the proper temperature) you can lose some flavours and volatile aroma.
Remembering this I think I tried to apply this theory while making some brew, but as we can say in Spanish "dando palos de ciego" ... Of course it was a weird brew because I didn't have the time nor the patience to do more experiments.
But after this video I'll definitely try it again!
Ohhh boy love this video! Gonna try it out first thing the morning. Would be nice if you could share what coffee you used in the video ❤️
The cup is fantastic. More aromatic, very clean cup, no bitterness at all. Brewed using ssp mp at 900-1000 micron. I use 2 kettle, boil 1, then pour into an empty kettle, then add room temp water til it reach 60C
This saved a bag of beans for me. I picked up this washed Guatemalan medium-light roast, and I just couldn’t make it taste good (let alone great…) after using several different recipes and brewers. Bitter and zero characteristics.
Used a 60c bloom (lowest my kettle can get while still knowing the temp) and then off boil for the rest of a normal recipe. I didn’t think it would make that big of a difference, but it truly made the roast sparkle as best as it can. Great finish. No astringency. The roast has virtually no acidity, but this made the nutty flavors pop. I’m excited to snag a better fruity roast and see what really comes out.
Tried this today with a Costa Rican coffee and i have to say it is delicious. I am going to have to try it with a burundi that i was having issues dialing in. Although being here in the states my bloom was 2 minutes 30 seconds as that is how long it took my kettle to get up to 95 degrees from 55.
I like doing experiments when I change one variable and take it to opposite extremes. I did this with water temp learning how to do sprovers and now nomacano. At around 4g/s I sit at basically 73C when starting at 80C. 20-21g ground coffee I keep in the fridge, paper filter in the basket, 150g in the cup, add ~50ml water after. I don't get any drying tannins or bad flavours doing this and it's super consistent. The only variable I change is grind size depending on the coffee. I've yet to buy a pour over device yet, having my machine stop on weight for me automatically is too hard for me to give up apparently. I'm also not certain I'll have any "better" cups from a pour over and it's just so much more work and waste of paper in my brain. But I imagine I'll try eventually lol.
That blue machine in the back looks super cute and clean and unobtrusive to my bubble that is sensitive to environmental protrusions lol. Also, I wanna taste coffee that has cotton candy notes pls. :p
I remember talking to Samo about adding lotus minerals after brewing with zero TDs water, and he mentioned coffee blooms different with softer water. That's another variable to investigate. 😉
Now, Im curious. How is the bloom with softer water?
@@T.M.S.2czcams.com/video/MpKEdZjpqXM/video.htmlsi=yTjX0cqis9_CwW3B
Tried this Samo method and YES, flavor changed for better, more floral notes from the coffee I brewed. Overall I've been using the 4:6 pourover method at 95C. Today I did the first pour at 70C and waited about 70 sec while the water heated to 95C for the last 3 pours. When I finished the cup was about 4C cooler than pouring all for at 95C. But with only 1 kettle this is an annoyance I do not like. Maybe I'll clutter my kitchen with a second Fellow kettle (diff color) for Christmas? Meanwhile, I'll try brewing all four pours at lower temp, 92C or 90C but doubt I'll go below 90C. The 70C first pour was flavorful enough I am actually considering a second kettle! Thanks!!
I just did a cup with a colombian honey, wonderful surprise, a bit acidic but better profile. On the other hand, I did a fermented mexican and OH NO, yes you get the strong prominent cocoa smell on your cup, but the fermented funkyness just went to another level. I double checked repeating the normal process for the mexican and we came back to balanced-town. So yeah, there is something to say about the samo bloom changing the profile of the cup. I am doing more experimentation, but it is by no means a be-all end-thing.
That segue to the sponsor. Bravo. That was a good one.
I just tried this with beans from Peru roasted at a local roaster. It tastes delicious
Super interesting approach, will try to test that out. Tetsu Kasuya had a similar approach in his Hario Switch recipe, but with the temperature change reversed. He starts with the 90C and then gets down to 70C. Of course Switch is a hugely different brewer, but the idea to get the most of the desired flavours and discard the less pleasant ones is the same. Would be fun to see those two recipes compared/merged together.
I think merging would actually be very interesting to try and I just might try it later today with 20g beans: 60c bloom (to 50g), 93c first pour with valve open (to 120g), 70c second pour with valve closed (to 280g)
@@chrisjohns2734my exact thoughts as well. Will try it out tomorrow. Please let us know what you find...
@@MrKekn I actually tried it today with a very light Ethiopia and it was... Not great. As both the drawdown (too slow!) and drinking temperature (too warm!) were affected. I'll try it again with 75c bloom but perhaps, as Lance said in the video, it's not the best approach for all coffees. Was certainly an interesting experiment though!
Brewed trying the Samo Bloom. It does add fruitiness, also weakens the brew as noted from Lance. I used V60, @ 1:15.3, 20g Heart’s Halo Eth. 60g bloom at 125°F rest at 208° F. Went one click finer on my Encore. I might go another click or two finer. But the results are quite intriguing.
James and Lance both uploaded a new video within an hour if each other!
What a day to be alive! Santa, have you come early? 🎅
Wow… thank you Lance for flagging that up!
The « who was the first? » debate is useless to me as long as it’s taught by a passionate teacher.
In any case this really makes a difference for me and I’m glad you made me try the cooler bloom.
I’m experiencing the best pour over I’ve ever made :-)
Just tried it on a prolonged natural geisha from costa rica on an orea v3 and the balsamico vinegar punches hard. thanks for that man🙏