Video není dostupné.
Omlouváme se.
DCCconcepts Rolling Road How To Use
Vložit
- čas přidán 13. 08. 2024
- In this video we look at the DCCconcepts rolling road and show you how to get the best out of it including changing the gauge of the rollers and using it to run 3 rail locomotives.
www.dccconcepts.com/product-c...
Music from Bensound.com
Thankyou Jenny new to all this going to buy a set right now from Rails thankyou.
I was in two minds over a rolling road but watched this video and it made the difference i purchased a set right away arrived this morning and as i model 009 ill have to use the n gauge setting so no over tighten of screws fingers crossed 😅
That was great, well explained, and to the point. look forward to seeing more videos. Well done Jenny. Bye for now, take care, stay safe, and have fun.
Thanks!
I really like my DCC Concepts Rolling Roads!
Hello Jenny!! -Heath
Erm.... hello!
@@dccconceptsyoutube6446 LOL, was this actually Jenny responding or is this Richard?
@@HumancityJunction it may have been Jenny! ;)
@@JenniferEKirk - it's invasion of the body snatchers!!! - Richard.
had this for many years now, the flexibility is great as i can use it on little Pugs right through to A4s. have even used on a 2 car DMU. i also made a bit of a custom rig using one of these as power for doing loco wheel cleaning
Thank you for that Jenny, just what I needed as I couldn't work out how to use them.
To be honest, the video was produced precisely because we get a lot of calls from customers asking about, in particular, how to change the gauge. A video here was far better than our technicians answering the same question over and over again.
Congrats on your first official DCC-Concepts video Jenny, all you need now is a DCC-Concepts branded cutting mat to use instread of your grey painted plank :)
Thanks!
I use them quite heavily with decent size/weighty diesel locomotives in OO and yes they are good but can be a pain to line up with either Bo-Bo or Co-Co loco's as they easily move or jiggle about whilst trying to position the loco onto them and if you don't line up exactly the first time then yes like I said they can be bit of a challenge to get right and the loco properly seated.
They are a good product and do the job as long as you have the patience and concentration thrown in for good measure, I wouldn't mind if DCC Concepts came up with something where you can put your loco onto a rolling track like that product from Roco but not stupidly expensive like that one.
Great first video Jen!
Having the spacers seems to make it fairly easy to get the desired gauge set up.
P.s
Hope you enjoyed the sweets 😉😁
Many thanks! And yes, I very much enjoyed the Jelly Babies. I'm sure that the cupboard Monkey will love the other packet!
@@dccconceptsyoutube6446 that's if they make it home of course eh? 😉😁
I've been looking for a HO Premium set for five weeks now, none available anywhere, lots of N gauge Premium though including two at my fav retailer, Kingston Locomotive Works (Canada). It's not the gold plating but the case that I want, much better to store the parts than a blister pack.
DCC Concepts will not be producing any more Premium sets according to an email I received.
Very interesting, can I use this with my various articulated steam locomotives.
Excellent - I am thinking of getting one of these.
Great news James! It's a great investment! ^RB DCCconcepts
Just a quick question.. Why would I want these?
You would use these to run-in and test locos without having them run up and down the track. You can keep your eye on them whilst running in or troubleshooting.
Also - if you have a "shunting plank" or small layout that doesn't have the ability to "run around" then you can't run a loco for more than a few moments in one direction at reasonable speed. This allows you to run for as long as you wish in any direction :)
Its a very good product, but be carefull when changing the guage,do not overtighten the screws,they are tiny and can strip the plastic thread very easily.
Do let us know if this happens - we do have spare parts available :)
@@dccconceptsyoutube6446 hi, i did strip one when i first changed the guage,have you got anything that can remedy this,it would be most helpfull.