DIY DOOR HANGER for Jeep Wrangler and Gladiator Trucks - Works for JL / JT and JK too!
Vložit
- čas přidán 12. 06. 2021
- Thanks to the awesome engineers over at Jeep, removing the doors on a Jeep JL Wrangler or JT Gladiator pickup truck is easier than ever before. And because of it, there really is no reason why you shouldn't be taking yours off, especially now that summer is here! Well, except for the fact that they do take up a lot of space, get in the way and leaving them on the ground or resting up against a wall, can lead to them getting damage. So, what do you do with your doors once they are off?
For me, the answer was to hang them. Specifically, up on a wall so that I could get them off the ground and out of the way. And, while there are a myriad of door hangers out there that you can buy, most cost upwards of $100 or more. Needless to say, I decided to make my own and in this short video, I'll so you just how easy it is to make, in less than half an hour and with just a basic set of tools. Of course, the best part about my DIY solution, is that you can find everything that you need at your local Lowe's Hardware Store or the like and it can all be had for about $16 and change! And that, is what the PIPPI Project is all about.
For detailed instructions and a complete list of all the hardware and tools you'll need for this project, simply click on the link below:
www.wayalife.com/threads/vide...
Come join our online community at WAYALIFE.com
RECOMMENDED BUYS
Milwaukee M18 Drill: amzn.to/3gyMeBE
Milwaukee Drill Bit Set: amzn.to/3wo3oIZ
Tekton Socket Set: amzn.to/3pPUMZp
Tekton Screwdriver Set: amzn.to/3wpnPWa
Milwaukee Tape Measure: amzn.to/3wrsmHG
Stud Finder: amzn.to/35iw6is
* Please note that the Amazon links posted are associate links and WAYALIFE does earn a small kickback for purchases made through them.
#wayalife #jeep #doorhanger #wrangler #jeepwrangler #jlwrangler #wranglerjl #jeepjl #jljeep #pippi #pippiproject #diy #budget #homemade #loweshomeimprovement - Auta a dopravní prostředky
This was brilliant. Had me guessing till the last minute.
LOL - awesome :)
Me too! LOL!
😅me too. I was not quite sure what he was building
If you have more DIY’s, bring ‘em on cause I love this!
Awesome! I'll see what I can do :)
Nicely done! Yet another reason for me to admire this channel (even if the footage in Lowe's was unnecessary fluff 😉).
Thanks again for your effort to support the Jeep community.
LOL - Happy to hear you found our video to be useful and that you enjoy our channel 😎
@@wayalife Yours is now the first and sometimes the only channel that I visit when I'm seeking DIY advice for Jeepy stuff. I'm not just saying that; your practical content works for the Man-In-The-Street owner, which is most of us. Thanks again!
@@thedailywin537 Truly humbled that you would say as much 😊
Awesome DIY door hangers. I like how budget friendly this is as well, Jeep “things” are always so over priced when $16 here gets you what you need!
Happy to hear you like our solution! 😎
I’m telling you guys Eddie is the G.O.A.T on Jeeps🤙🏽🤙🏽🤙🏽
LOL - too funny :)
Awesome. Totally doing this. Already did the top lift you demonstrated like a year ago! Love it.
Love videos like these. Keep them coming!! Production quality is amazing as well.
Thank you. So glad to hear you like videos like this and that you like how we make them 😎
And I love how you actually use the correct name for each component even if it's a nut or a bolt or a washer.
Well, it helps to separate one thing from the next. 😎
I feel more like a man every time I watch this channel.
LOL - hope you find our content helpful :)
I followed the instruction and made the door hangers for my 2019 JLU’s full doors. The only caveat is that, using 1/4” by 3-3/4” eye screws, when you put the front door on, it’s so heavy that the screws are bent as soon as the door’s weight is put fully on the eye screws. I replaced with 5/16” by 4” eye screws and made sure 2.5” of screw is torqued into the lumber, and it worked perfectly. GREAT instruction and it works like a charm
I had the exact same problem, going to try 5/16 next
I wish I had read this comment BEFORE going to the hardware store... bent, just as described...
Always top tier Quality form our favorite Jeep Channel! Going to do this for the new Ecodiesel build and have more room for our road bikes! Thank you!🙌🏼
So happy to hear you enjoyed the video. 😎
This is so helpful. I really like the direction you are going with this new series. It is great to see you going back to basics. And welcome back. Your videos were missed.
So glad to hear you're liking our new project and thank you.
Really useful and at the same time, the proper and secure place for the doors. Awesome job Eddie as always. Many thanks for sharing.
Happy to share some of the things that I come up with and with the hopes that it can help others out :)
This is so freaking awesome! Thank you! Just got my JLU and can't wait to build these. 🙌
Awesome! So glad that we could be of help to you :)
I love these types of videos! Great content. Also, I really like the new 2 door Jeep. Great addition to the fleet of Jeeps. It's nice to see some 2 door love on CZcams.
Glad you like them!
This came at the right time for me! Thanks Eddie. I really appreciate your videos!
Awesome! You are very welcome :)
This is a great channel! I love the content and you have helped me with my JL. I just got it in February and have been having a great time. Thanks for the content.
Awesome, so glad to hear it!
It is always a joy to watch your (excellent and great) videos from Switzerland :-) Thank you for sharing and congratulations for your superb Jeep collection (I dream) !
Thank you very much!
WAY NICE!!!!! Thanks for taking the time to make and post the vid -much appreciated.
Glad you liked it! 😎
You would think this guy was in the video production industry before doing what he’s doing now with how good these videos are put together 😂 damn
Truly flattered you would say as much. 😊
I really appreciate the attention to details that you illustrate in this project and for sharing to others!
We're really happy to hear you enjoy our videos and find them be helpful to you 😎
Built this today and it works perfectly. Thank you so much for this great video!
Awesome! So glad to hear we were able to help you out. 👍
Just wanted to say thanks for posting this. I used it as the inspiration to build one to hold 4 doors. Great idea!
Happy to hear our video was helpful to you.
Wow. This was a great video. Thank you for taking the time to make the videos on DYI projects for the jeep.
Awesome! Happy to hear you found our video to be useful 😎
Just built my mounts and top hanger yesterday. Works spectacularly. Thanks for sharing your knowledge man.
Awesome! Happy to hear our video was helpful to you.
Wow great video! I just finished making some of my own self made door holders for my gladiator that were no where as fancy as yours!! I kind of wish I saw this before making mine. I like yours so much, I might actually change mine to your setup!!
LOL - glad you like what you see :)
Just did this for our 4-door half doors, awesome money savings idea. Thank you for sharing.
Awesome! Glad it was helpful! :)
Another excellent video. Camera, audio and storytelling just spot on. I don't even have a Jeep and I watch just because the videos are so well made.
LOL - truly flattered to hear you say as much. Thank you.
@@wayalife Most importantly the editing is tight. Makes it very enjoyable to watch.
Great instructional video. What a great way to get the doors hung and out of the way in an inexpensive manner,
Glad you like what you see :)
So simple yet so ingenious all at once. Kicking myself for not coming up with something like this after sooooo many years of moving Jeep doors around my garage.
LOL - better late than never to get it done right :)
I built two of these today for my wife's new Rubicon 4xe and registered on your site. Thanks for the great videos!
That is awesome! Glad to hear our video was helpful to you.
Great project and what a simple solution for hanging Jeep doors
Glad you like our solution. 👍
Thanks for posting these. Your tutorials are excellent.
Glad you like them!
Videos like this are invaluable. Love it! I’ll be make a pair for my 4 dr. 🤘
Awesome! Glad you can appreciate the simple things 😎
Are the measurements the same for the read doors? Definitely gonna make this! Thanks for all you do Jeep friend!
@@erikstrieter4233 Yup, exactly the same.
Thanks for the video just made my diy door hangers for my gladiator. Really appreciate it man.
Awesome! So glad to hear our video was helpful to you 👍
This is amazing, been trying to figure out what to do with the doors when I take them off my Gladiator, looks like a trip to Lowe’s and I am all set.. thanks for this!!! Also gonna do the setup for the roof, I like it!! Great content and great ideas, thanks so much!!
Awesome! So glad that we could be of help to you 😎
@@wayalife amazing content, so happy to have found your site
I built a DIY hard top hoist and this is right up my alley! thanks for the idea
Glad I could help!
Great job and I admire your ingenuity.
Thank you very much! 😎
Clever idea! I dont even own a Jeep (Tacoma owner here) but love the awesome content!
Awesome! Thank you!
Brilliant!!!
I just bought my first jeep, it's a 2015 Rubicon JKU. It already has a lot of aftermarket goodies installed so I'm ahead in the customization department. I'm loving the diy door hangers.
Awesome! Glad we could share this with you and congratulations to you :)
Made two sets for myGladiator and they work like a dream. Such a good idea. And simple!
Awesome! Glad to hear our video was helpful to you.
Super badass!! Thanks again! You are saving me close to $1,000 between the door hangers for my 4-door and the top hoist. You should have ended the video standing directly between the two doors hanging. They would have looked like wings. I’m subscribing. So glad I found your videos!
LOL - glad that we could be of help to you :)
this is the first project i do when the shed comes in in a few a few months. doing this x2 for the back doors on my gladiator.
Awesome! :)
Another awesome video. Great that you share your knowledge and experience. Tell you sweet dog "good doggie" from a NM fan
Thank you! Will do! 😁
Finally a simple door hanger! I was trying to come up with a budget way of making hangers for my LJ and when I saw the eye bolts, I was like well why didn’t I think of that!?! Genius sir, simply genius. Thank you brother!
Glad I could help!
Great video and step by.step instructions. Another project for me once we get some sort of half doors for our new Wrangler.
Awesome! Glad to hear you found our video to be useful to you 👍
Thanks for sharing. Just built mine today, it works like a charm, and for less than 20 bucks.
That is awesome and glad that we could be of help.
Love your Videos super fun to watch and so informative. Thank you! 🙂👍
Glad you like them! 😎
I followed your video and the step-by-step instructions and made a hanger for my garage this afternoon - took me around an hour but I took my time. It turned out great and I will ultimately build 3 more of these in case my Gladiator and my wife’s Wrangler have all the doors off at the same time. Thank you so much for this video and all your other videos - as a relatively new Jeeper I have learned a lot from you!
Awesome! Happy to hear our video was able to help you out 👍
Nice, thanks and always good to see Ripley!
LOL - awesome and glad you like seeing Ripley :)
Dude.. This is amazing.. Starting this TOMORROW. Thank you thank you
Awesome! So glad that we could be of help to you 😎
Just made two of these today for my JKU, super easy and saves so much space in my garage. Cost next to nothing. Thank you!!!
Happy to hear our video was helpful to you and that you like the results 😎
Thanks for this video. I have been looking for door hangers for our Jeep with spring approaching and most online are crazy expensive as are most Jeep accessories. I'm going to build this shortly!
Happy to hear our video was helpful and that it'll save you money as well.
Awesome vid! Cheap diy project for a cheaper Jeep. Love the channel!
Glad you like it! Thanks!
Such a great idea! Clean and simple solution
Glad you like it! :)
Well done. Definitely doing this. New subscriber from Canadian 2 door Jeeper.
Awesome! Thank you!
3 planks of lumber, screws, and washers. Yup, that's all we can get in the back of the 2 doors. 😂
LOL - keepin it real for the 2-door guys 😁
AWESOME video! Thanks for posting it. I have been looking for a really simple, sturdy way of hanging my JK doors and this is it. BOOM!
Glad I could help!
Muy bueno, como siempre! Saludos desde España amigo!
Thank you very much for this video ... I know what my project for the weekend is !!!
Awesome! Glad we could be of help to you :)
Thanks! Just made one for my garage! Brilliant!
awesome! So glad to hear our video was helpful to you.
Awesome-!!! Pretty slick - thank you for sharing!!
Glad you like it 😎
I did this for my cj. Took a old bemch swing, fabricated some side steps and some door hangers aswell but they go thru the window frame. Put some foam on it so i dont sctratch the inner window frame
This is one of my favourite channels. And I'm not even into 4x4ing. Although I would like to be.
LOL - flattered to hear as much and if you can, you really should get into it. I think you'd love it :)
Great idea Eddie , thank you for sharing .
You are very welcome :)
Well done. Made a double rack for my 4 gladiator door yesterday. Only thing I did differently was offset the heights slightly so the hold-open plungers don't hit.
Now there's a good idea!
Great idea on the eyelets! Gonna make some. Need a couple sets. I hate lumber is so high, thanks uncle Joe.
It really is stupid how much lumber is these days but in spite of it, you can still make this for cheap.
@@wayalife love the YJ!
What a great video I can have my spare bedroom back lol definitely going to do this
Awesome! So glad we could help you out with this one! 👍
Such a great idea glad I found this channel.
Glad you found us and liked what we did here :)
Extremely helpful, love the channel and all the good info!
Glad to hear it!
I got confused for a second at the end when you pulled in with doors on the Jeep… Awesome vid
I'm still confused.
Yes, I have a manual 2018 Wrangler JL, 2-door, soft top with manual windows!
Retro baby! You need a “man pedal” and two doors for the retro experience!
Love your project.
Awesome :)
Amazing, you give taste to life my friend. Thanks a lot
LOL - that's awesome :)
I am definitely doing this. Nice build buddy.
Awesome! Glad we could be of help 😎
Great video 🤙🏻
Thanks for the video, I built 2 sets of them today for our 2021 Sahara 4Xe. I already had the lumber and the screws, went to the hardware store and spent 8 bucks on eye bolts.
Awesome! Glad our video could be of help to you :)
Awesome work. Great narrative!
Glad you liked it! 😎
This is great! Gonna have to do this myself. My doors are currently nicely tucked away on the garage floor. This would get them out of the way!
Awesome! Glad we could be of help 😎
Great DIY. Thanks for sharing.
Glad you like my solution :)
Mind blown 🤯 that was so easy!!
LOL - glad to hear you think so :)
Awesome outstanding job have a great time thanks
I’m doing this next! Great video ! Thank you
Awesome! Have fun with your doors off! :)
That’s a great idea! Way better than my pvc stand that’s still on the shop floor in the way!
Glad we could share this with you.
Great video, will make one myself
Awesome 👍
Thanks Eddie, I have yet ANOTHER project to do while on vacation.
Awesome! Glad to be of help :)
Love this solution! Going to try this once I get the hoist installed for the hard top.
Awesome!
@@wayalife are you putting anything over the doors while hanging in your garage to protect?
@Marty Sharpe yes, I put a sheet over them to help keep dust off.
We’ll know my wife is wondering why I have all these things in my shop for a Jeep and no Jeep! Hope to finally get our Jeep Wrangler unlimited this year. Great video!
Awesome! Glad you found the video to be helpful :)
Awesome. half door hangers are expensive. thank you. will be making this soon
Happy to hear we could be of help to you!
Those half doors look great!
Thanks! 😎
Anyone else said out loud after he was done “ok how’s THAT going to work?!” Lol this is awesome
LOL - glad you enjoyed our video and my solution :)
Works great thanks for the idea!!
Happy to hear our video was helpful to you.
Great DIY and looks good also.
Thank you 😎
That was a great way to store the doors!
Glad you approve 😎
Great idea! I have a bunch of wood already about this size from building a shelf with my Dad so looks like I'll just need the hardware.
Awesome! 👍
Wow. Awesome! Thanks for your video!!
Happy to hear you liked it :)
Sweeet and easy. Thank you sir!
You bet! Glad we can help :)
You had me going all the way through the video, what the
heck is he making? Right up until you hung the doors. Brilliant!! Another
enjoyable video. Thanks to you and your wife for all your hard work you put
into your videos. You keep all 160+ thousand of us entertained and waiting for
the next one.
Awesome! So happy you enjoyed this one 😎
This is what been waiting on home made projects. Fir the cheap jeepers.
So happy that we can help out in this way :)
NIce and thank you for the description and cost.
You bet - glad we could be of help :)
Just built these and they are doing well.
Awesome! Glad to know that our video was helpful to you.