HIKVISION INTERCOM ADD CARD VIA IVMS4200

Sdílet
Vložit
  • čas přidán 21. 08. 2024
  • Join this channel to get access to perks:
    / @adshikvision
    HIKVISION INTERCOM ADD CARD VIA IVMS4200,
    MISSING MASTER CARD DONT WORY YOU CAN REGISTER CARD VIA IVMS4200

Komentáře • 22

  • @OmryAviry
    @OmryAviry Před 8 měsíci +1

    Did this with the original card I got with the ds-kd8003, everything went well until I tried to apply all changes and it failed saying the card is not supported. same happened with a Mifare chip I bought. the reader is able to read it but it fails when I apply the changes to the device.
    Any suggestions?

  • @ruifernandes6737
    @ruifernandes6737 Před 23 dny

    where do you find the password you used? I already tried several but without sucess

  • @abmisbah
    @abmisbah Před rokem +1

    Hello bro, thanks for the video, did you tested the template customization, when i setup cards to open from 8h to 12h , and applying to device, the card open all time all day,

    • @adshikvision
      @adshikvision  Před rokem

      check your created template and schedule once more...

  • @altungaming8776
    @altungaming8776 Před 6 měsíci +1

    What type of card is accepted or what type of frequency is it because I lost my card?

    • @adshikvision
      @adshikvision  Před 5 měsíci

      It's support mifare card. Model no ICS-50

  • @saeed3409
    @saeed3409 Před rokem +1

    It doesn't show the number after i read the card. Im using rfid white cards same ones on video. Please help

    • @adshikvision
      @adshikvision  Před rokem +1

      RFID CARD WILL NOT SUPPORT HIKVISION INTERCOM
      USE MIFARE CARD
      ICS-50 IS MODEL NO

  • @nicolasgikopoulos6191
    @nicolasgikopoulos6191 Před rokem +1

    I would like to thank you for this guide. I followed your guide step by step but Sadly it doesn't show the number after I read the card that came with the device. I press read, I pass the card over the device, It does the double beep but the ivms does not read the number and just waits. Apparently I have just bought the first version of Door Station DS-KV8413-WME1 with firmware V2.1.35 build 210507. Any help will be appreciated.

    • @adshikvision
      @adshikvision  Před rokem

      Make sure your card is mifare card. Hikvision intercom will not support RF id card proximity card...

    • @nicolasgikopoulos6191
      @nicolasgikopoulos6191 Před rokem

      @@adshikvision Thank you very much for your response! It is a mifare card. As I said it was inside the box with the door station. I also tested the card with an Android MIFARE Classic Tool, and it was recognized as an MIFARE card.

    • @seguricam6855
      @seguricam6855 Před 8 měsíci

      Maybe you are using the card that came in the box, it is a master card

    • @seguricam6855
      @seguricam6855 Před 8 měsíci

      It is a master card, pass this card over the device you hear 2 beeps, now pass the new card you hear 1 beep finally pass the master card again you will hear 2 beeps that's all.

  • @shakeelpatel4053
    @shakeelpatel4053 Před rokem

    Hello I wanted to know what if my master card has been stolen how to remove it from the system? Please help🙏

  • @robertlupse56
    @robertlupse56 Před rokem +1

    Hello I get an applying error while I apply changes, what can I do?

    • @adshikvision
      @adshikvision  Před rokem

      update latest firmware... then you can login device via browser then you can add user..

  • @AHMED-hz6lh
    @AHMED-hz6lh Před rokem +1

    Please brother which the kind of card name rfid card can work or no

    • @adshikvision
      @adshikvision  Před rokem

      HIVISION INTERCOM ONLY SUPPORT MIFARE CARD.... MODEL ICS-50

    • @AHMED-hz6lh
      @AHMED-hz6lh Před rokem

      @@adshikvision how i add the card brother to phone Xiaomi to open the door

  • @altungaming8776
    @altungaming8776 Před 6 měsíci +1

    bro i have a problem after aplay al to divaice theis problem : Applying failed..(Error code: iVMS-4200.AccessController.S.exe[6109].)

    • @adshikvision
      @adshikvision  Před 6 měsíci +1

      Let me check

    • @altungaming8776
      @altungaming8776 Před 6 měsíci

      @@adshikvision I think I have a problem with the type of card. What type of card does Hikvision accept?