Avid CNC Rotary Axis - Assembly and Installation
Vložit
- čas přidán 9. 07. 2024
- Avid CNC Rotary Axis - Assembly and Installation
More down here ↓↓↓ Click MORE!
In this video, I’m documenting the assembly, installation, and alignment of an Avid CNC Rotary Axis for my Avid 4848 Pro CNC Router. I’ll first show you the assembly of the rotary axis. Then I’ll show you how I removed my old spoilboard, mounted the axis to my machine frame, then walk you through the process for aligning the axis with the machine frame step by step.
As usual, if you have any comments or questions about anything I covered in this video, please join me for the Live Q&A, or put ‘em in the comment section below.
On Sunday, May 19th, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I’ve covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. Hope to see you there!
Here’s a link to the Live Q&A: czcams.com/users/live3_kl0H5yus8
Link to my Avid CNC Rotary Axis playlist: • Avid CNC Rotary Axis
Link to Avid CNC Rotary Axis: www.avidcnc.com/avid-cnc-rota...
Link to Lexivon 3/8 Drive Torque Wrench: amzn.to/3UFHYo6
Link to 24 x 36 inch Stainless Steel Work Table: amzn.to/3WQMXFn
For more info, or to configure an Avid CNC of your own, visit their website: www.avidcnc.com/
______________________________________________________________________________
If you’d like to support my channel and help with the making of future videos, please consider becoming a channel member. If you’d rather make a one-time donation, you can do that by using the following link:
PayPal: paypal.me/MarkLindsayCNC
Direct link to more information on becoming a Channel Member: / @marklindsaycnc
Thank you very much!
______________________________________________________________________________
Link to the Vectric for the Absolute Beginner Playlist: • Vectric for the Absolu...
Link to the 3D Modeling for the Absolute Beginner playlist: • 3D Carving for Beginners
Link to the V-Carving for the Absolute Beginner playlist: • V-Carving for the Abso...
______________________________________________________________________________
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
marklindsaycnc.com/index.php/p...
marklindsaycnc.com is sponsored by Harneal Media - a website developing company that specializes in websites for the maker community. Find out more at:
harnealmedia.com/
______________________________________________________________________________
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
www.vectric.com/
For more info, or to configure an Avid CNC of your own, visit their website: www.avidcnc.com/
______________________________________________________________________________
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support!
This video is for informational and entertainment purposes only.
#avidcnc #4848Pro #rotaryaxis - Jak na to + styl
Congrats Mark. Great video! It warms my heart that American engineering isn't dead. Haha
I've got to agree. Avid has some of the best instructions on the planet. I can't wait to see what you are going to do with the 4th axis!!!
What? Following the manufacturer’s instructions? Where’s your sense of adventure? Takes all the fun out of having to redo things. Well done, looking forward to your first spinning wheel spindles.
Great video Mark I know it was alot more work and time than the video shows.
Believe it or not, John, it's not as much work as you'd think. If a person had a whole day to his or herself, they could easily go from boxes of parts to having it up and running in a day. The main reason it took me as long as it did was because I didn't have a whole day to devote to it. The alignment was tedious, but other than that, from start to finish I had it done in 2 days.
Mark I still have not used my rotary on my AVID yet lol
Mark wow, Thank you for a slow In-depth video. Your my go to instructor.. I'm brand new to the CNC and you are making it more easy to understand. I first seen you on the ICD woodcraft live so I look you up and seen what you had and now I'm hooked. what is the best program to load all the information to mill the job? I was told to get Openbuild or gsender Plus more?? Im slow but sure. age 75 Thanks for your video.
By chance, I just received my 4th axis from Avid earlier in the week. This video goes a long way in removing some anxiety and dread about setting things up. I should get a torque wrench. What is the torque suggested for extrusion?
You are an easy-to-listen-to teacher and your videos are clean and void of fluff - a testament to your editing.
I do appreciate your kind words, but I think my editing needs a lot of work. Just my opinion, but thank you again. I'd say 99.999% of people don't bother with a torque wrench. They just snug it up and move on. Avid themselves suggest that. I spent too much time in the army working on helicopters to not have at least a suggested torque value, but that's just me. I spoke with the folks at 8020, and they recommend a torque of 15-18 ft lbs., but DO NOT go past 20 ft lbs. Basically, if you tighten it until it's tight, you'll be fine.
I signed up for your channel member. I hope i did it correct.
Yes, you certainly did. Welcome aboard! I'll be posting the links to Monday's Members Only live stream in just a few minutes. Check the Community Tab here on CZcams. I post them there every week: www.youtube.com/@MarkLindsayCNC/community