How to Configure Multiple Spanning Tree Protocol (MSTP) on HP Switches

TIMESTAMPS:
0:00 IntroductioN
4:10 Configuring MST region on the CORE Switch
7:50 Configuring the CORE Switch as Root Bridge and Enable STP Globally
12:34 Configuring MST region and Enable STP Globally on the Access Switches
15:30 Verification
20:30 Talking about Root Bridge Election
22:12 Verification Cont.
26:24 Conclusion
********************Configuring an MST region on the CORE********************
1. Enter system view
system-view
2. Enter MST region view
stp region-configuration
3. Configure the MST region
region-name hp
4. Configure the VLAN-to-instance mapping table
instance 1 vlan 1 to 4094
5. Configure revision level. Default is 0
revision-level 1
6. Display the MST region configurations that are not activated yet
check region-configuration
7. Activate MST region configuration manually
active region-configuration
8. Display the activated configuration information of the MST region
display stp region-configuration
********************Configuring CORE as the root bridge of the STP instances********************
1. Enter system view
system-view
2. Configure the current device as the root bridge of a specific spanning tree
stp instance 0 to 1 root primary
NOTE: All VLANs in an MST region are mapped to the CIST (or MSTI 0) by default.
!With the BPDU guard function enabled on the devices, when edge ports receive configuration BPDUs, MSTP will close these ports and notify the NMS that these ports have been closed by MSTP.
stp bpdu-protection
!Enable STP globally
stp global enable
********************Configuring an MST region on the Access Switches********************
system-view
stp region-configuration
region-name hp
instance 1 vlan 1 to 4094
revision-level 1
check region-configuration
active region-configuration
#
stp bpdu-protection
stp global enable
********************Verification Commands********************
display current-configuration | begin stp
display stp root
display stp region-configuration
display stp instance 1
display stp brief
NOTE: region-name and revision-level should be the same on all the switches so configuration digest matches on all of them.
🔔 Subscribe to my CZcams channel:
www.youtube.com/ @FerdsTheNetworkGuy
📺 Explore My Complete HPE Networking Tutorials Playlist:
• HPE Networking Tutorials
References:
support.hpe.com/hpsc/doc/publ...
#hpe #ccna

[@FerdsTechChannel]

TIMESTAMPS:
0:00 IntroductioN
4:10 Configuring MST region on the CORE Switch
7:50 Configuring the CORE Switch as Root Bridge and Enable STP Globally
12:34 Configuring MST region and Enable STP Globally on the Access Switches
15:30 Verification
20:30 Talking about Root Bridge Election
22:12 Verification Cont.
26:24 Conclusion
I hope you found this video helpful, please like, subscribe and click the notification bell so you won't miss future videos. Thanks for your support! ❤

[@ahmetmaslak1104]

hello how are you thank you for these tutorials it's actually a great tutorial and the docs are very good thank you for your help on this

[@FerdsTechChannel]

Glad you like them!

[@fvolpato]

Hello.. great video.. what is this software program you are using ?

[@FerdsTechChannel]

It's called HP Comware Lab. 😊

[@KikiNation1]

Dude ... you are into 3+ minutes and you haven't said a thing...

[@migielfrancissen695]

Sorry, you need to learn how to do a presentation. It is to chaotic to follow.

[@FerdsTechChannel]

Thanks for the comment anyway.
You can check the description of the video and just follow the steps. 🙂