🚗 2008 2013 Nissan Rogue AWD Transfer case Oil Change

2008-2013 Nissan Rogue Transfer Case Oil Change
Drain Plug Torque 25Ft/Lb
Fill Plug Torque 25 Ft/LB
Oil capacity 5/8 Qt
Transfer Case Fluid-check manual for specs. I put 80W-90 Gear Oil in this vehicle.

[@jbowden718]

Thank you for the video. I did the service on my neighbor's 2011 Rogue AWD. Yeah small impact tools were useless. I had to use a 1/2 long reach ratchet along with a 10mm hex plug bit. I bought the kit which had numerous fill plugs from Harbor Freight. I looked up the capacities for the front which was 0.8 pints and the rear 1.1 pints. One other person said 35 ft lbs on the plugs so I split the difference. Torque to spec on plugs.

[@BARR8323]

Thanks for sharing

[@damioncunningham4502]

Very very informative video and I appreciate the knowledge 👍

[@Lillychan1]

Thank you. Very helpful video.

[@dosmastrify]

No pink gloves this time?

[@shadymousa6642]

Can you please let me know the hex tool size you used as it seems there's a difference in size between the drain and fill plugs.

[@BARR8323]

I checked ant it has #10 stamped on it.

[@adamoucherifcharafadine343]

What is the reference of this transfer case oil please?i need to buy it for my Rogue 2009

[@swaggerjacker1482]

80w90 gear oil

[@haystephen]

Did you have to put new crush washers on the drain and fill plugs?

[@BARR8323]

No I didn’t, didn’t have any.

[@berry_fam686]

Is it the same fluid for rear and front?

[@swaggerjacker1482]

Yes