Elite force/vfc/umarex mags do not work properly in KJW/WE because the gas route seal shape is a marui type which is curved to match the marui loading nozzle which is cylindrical, the WE/KJW one has a flat seal and flat bottom loading nozzle, they might shoot but wont likely cycle your gun and wont be gas efficient you will also wear out the Elite force magazine gas route seal very quickly if you use it in a we/kjw. DO NOT DO THIS WITHOUT CHANGING THE MAGAZINE GAS ROUTE SEAL TO FIT THE OTHER. The differences you noticed in the blowback unit is the fact kjw is a direct copy of WE tech so those are actually interchangeable. The Elite Force/VFC/Umarex glock series uses a Marui type blowback housing which is a little bit fatter and has tabs in the front section that are fatter than the rest of the body meaning they wont fit in a we/kjw slide. Marui type blowback units are what you want because they are highly upgradeable. Umarex/vfc/elite force also use a marui spec hammer chassis and hammer assembly so we/kjw are also not interchangeable with the umarex/vfc/elite force (marui) type.
MufasAilmz bir de ben bu seni bu güzel seviyoruz ya diye arama ben de çok olmak olacaktır ama artık seni yine ama diye ama merhaba sevdiğini yine gitmeyecekmiş sevmedim bir merhaba daha bir bilgi para merhaba bir ben bir sana de
Well done video and informative , still contemporary info, you should contemplate to make a series like this, comparing airsoft guns and compatibilities , cheers Max.
One major issue I had with my first KJW KP17 was the rear sight screw. Its located in the blowback housing keeping it connected to the slide. The screw is small and stripped easy. The threads kept coming loose and I would notice my rear sight and blow back housing would get loose with every magazine shot, possibly from the shock. I had to use loctite blue to stop it from falling apart.
thats so great of you to have different brands on hand to compare, it would be much appreciated if you can do a mag compatibility across them. e.g. if WE mag can fit in Umarex or KJ Works, vice versa. This could be one thing we want to know. Nice work btw
I love how glock makes its own bb guns and how they make them look so real czcams.com/users/postUgkxnX9wE_Q8zvF75Y5iWzTU3Q4FlrtyGApQ , the only thing is that the slide doesn't move back. The sights and the body structure is so similar to a real handgun, fits in my hand perfectly but I actually ordered it with the 40 pack of Co2 tanks and they never arrived even though it said that they handed It to me. Was not able to test the accuracy since I didn't get everything I purchased which is frustrating and that's the whole reason why I got the bundle so it arrives together. So the Co2 tank happens to be a third party so it makes no sense to put it in the bundle if it doesn't get shipped at the same time, the BB gun arrived first then the Co2 tanks were supposed to arrive someday later but didn't, which doesn't make sense. I recommend just ordering the gun itself so you don't get the same issue I ran into plus there's no option for a refund. How stupid.
Hey Max, will the WE green gas mags work in an Elite Force Umarex Glock 17 gen 4 co2 pistol? If so are WE mags different or the same for the entire WE line of Glocks?
Very nice video man, love your comparison.... only one thing, you may want to fix the cam setting so that it doesn’t change go change light setting all the time Be good if you could reduce over expose too....
@@MaxCherepenin I see that KJW pistols cycle perfectly, but they feel and look a bit "aluminium", so sliding parts might wear out faster. Anyway, I grease mine up a lot. I have a KJW P226 CO2 version (KJW KP-01 E2).
You demonstrated the magazines fit was interchange, did not touch on if they would interchangeably fire. will they fire and cycle interchangeably with no issues?
The we tech is made out of zinc alloy, a much cheaper and much weaker metal commonly known as “pot metal”. Heavier does not equal better quality or stronger.
Zinc alloy cast parts usually have weaker tensile and yield strength but usually have much higher impact strength than cast aluminum parts per geometry and have better cast tolerances usually. From the weight my best guess is the Elite Force Glock slide have higher aluminum content (maybe ZA-27 or completely aluminum based cast metal?) than the others. There are always trade offs in which material you choose but I think each have their merits. However I was not impressed by the smoothness of action for the Elite Force Glocks. Also If i'm not mistaken the weight of the WE slide mostly come from the blowback housing being very thick and uses a heavy casting metal.
Great video, seriously. Answered a lot of my questions I've been googling the entire day about. Think I'm gonna go with the EF version, weird how the FPS is supposedly so low here as the site I'm planning to purchase it from claims about 112m/s (roughly 360FPS?)
Haw about holsters/accessories fitting? I'm working with gen4 glock 19 with Olight pl mini light and i'm looking for airsoft glock that fits real steel duty/kydex holsters with that light
You can not use Umarex and Tokyo Marui mags on WE and KJW and vice versa, since the first two have a round piston chamber bottom, while the second two have it flat. They will click into place, but there will be a lot of gas hissing to the sides.
Hey nice video there! Could you inform me how long slide of tokyo marui glock 17 gbb would breaks? And if you have suggestion, I'm typically not wanted to upgrade my gbb, I just looking for gbb that out of the box are have decent performance and great durabillity without upgrading them, so what I should do is just maintenance them, could you suggest what brand of glock 17 type of gbb that I should pick?
Hey I know this vid is kind of on the older side, I was going to get one but I really want one to mimic the actual feel of a real Glock ( not interested in how they look because they all look good in my opinion ) but more of firmness & feel, from your experience of course. Also, what would you pay for these as of 2021?
I was wondering would a we glock slide fit on a kJ works frame, they sell these gen 2 frames but they are replacements for kJ works but I was wondering if I could use it to customise a gen 3 we glock, is that doable does the slide fit okay?
is the umarex glock 18c full auto barrel threaded? i went with we tech because i knew there barrel was threaded and i wanted to attach a tracer unit. plus it was half the price. i still plan on eventually buying the umarex version too because its the fully licensed version.
i saw the reviews on crowns airsoft for the G26 or it could be any of there products, the people that gave it a review said that there stuff never came in or they have been waiting for months and it still hasnt come in yet can anyone confirm if this is true or like has the same problem?
Do all the glocks featured can use the same suppressor? I know the WE has a threaded outer barrel and is compatible with the WE P-virus (Custom P226) striker compensator. Just curious if the others could as well.
SO only the WE has that threaded barrel in this video. I am sure that the EF has a barrel swap out there that has a threaded barrel to use to mount a suppressor.
And most parts of WE brand and KJW are interchangeable but not the frames like gen3 to gen4 swapping its not a plug and play but rest of the parts are interchangeable
One thing you failed to mention is that the Elite Force's mag gasket is the arched type. But the WE and KJW's are flat.. Yes they would actually work, but there would also be leaking of the gas if the WE or KJW mag was used in the Elite Force or vice versa.
But the drawback possibly is the slide compatibility, you probably won’t be able to swap the Umarex slide onto the we frame and vise versa cause the frame internals are different on the two being the Umarex vs the we tech :( have you tried swapping slides and see if they function properly? Just wondering (as in the we slide on the umarex frame or the Umarex slide on the we frame? Let me know if possible thx :D
The pros about the elite force is that they already comes kinda tune up good quality parts and we tech stocks sucks but once you buy custom inner parts it will be more pro accurate than elite force and pieces are everywhere also elite force sometimes are out of stock if we talk about gen 3 😢 I love all the same just like my cats 😅
On my elite force glock, I sheared off the edge of the mag release where it catches the magazine while doing aggressive reloads. It randomly drops mags while shooting now. I recommend upgrading the mag release to a real steel quality, which i plan to do. Hopefully i don't break it again. I have a KWA HK Match that drops magazines too, however its brand new and has done it since opening the packaging. Its mag release is completely different since its HK, so idk how i'll fix it. Is this common on airsoft guns? I'm not sure how i'm supposed to use them to train or even use them in a game if they are this fragile.
Its could be a weak magazine catch spring, or just that it has been abused so much to the point that the plastic is worn out and fails to hold on to the gun while it shoots. Disassemble the magazine catch and inspect for damage.
@@sneez9461 On the glock i know for sure its damaged. It happened only the 3rd time i took it out. And i only put a couple of mags through it. On the HK, it was dropping mags right out of the box, brand new.
@@musician445 I understand, bur sadly i dont have experience with KWA pistols, only glocks... What could it be? You should take a slow motion video and see exactly when in the blowback process the mag falls out, i do it often to see whats wrong
I will be buying a WE Tech glock 18c, I plan on using it extensively. Anything I should know about it? How long should I expect it to last? I’ve heard the hammer is weak on the g18c and to use lots of silicone oil when using in full auto
HOnestly just taking care of it will go a long way. Mine is about 5 years old. Hammer I have is still oem. I have the gaurder one and still have yet to use it lol.
mine came in, i ordered it from crown airsoft reluctantly, but the gun and the site did not disappoint. i have done a couple full auto mag dumps to test the strength of the gun after reading of how fast it breaks on full auto. i make sure to keep my mags lubed on all seals along with the loading nozzle inside the nozzle, and around the area where it tends to crack with the return spring and guide rod. still in working condition, i use propane in mine btw thats why i lube it so much lol. i believe they're making newer models as well seeing as mine came with no glock trademarks at all and an orange tip, the barrel and slide do have the WET trademarks on it tho so it is a WE Tech. It still has the g18c 9x19 tactical on the slide.
i already ordered the regular g18c it's still working great after numerous full auto mag dumps, i use alot of oil around the seals, and by the nozzle where it breaks. i used a razor to shave the tip of the corner where the nozzle breaks at to prevent friction with the blowback housing. still working great. will be buying ugrade internals for it, having a hard time finding an upgraded hammer assembly tho.
We mags work in vfc / elite force. I recommend changing the gas router to a nineballs tm17 gas router for better gas efficiency. And filing where the mag release catches the mag, so the mag can sit a tiny bit lower.
I dont know why you called having an aluminum blowback housing cheap when custom tokyo maruis are literally swapping out stock bbh with aluminum made ones
just picked up the elite force G17 gen 4 and was wondering if any one had or knows of any barrel extensions or attachments for the internally threaded barrel. thanks!
Thank you for a nice review. I would highly advice to start observing the firearm safety rules (at least the main 4). One day you may want to move on to real guns and having that finger on a trigger may cost someone a life.
It's an airsoft gun. Obviously he knows its fake, and if he were to get real guns he would definitely have learned the rules and probably knows them. So does every airsoft player/
I bought a 18c from elite force and after the first week it broke, when I shoot even on BB through the hammer will hit the valve and spew all the gas through the gun and out the inner barrel, idk how to fix it and I can't send it back
Are the lowers interchangeable with the uppers? For example, if I want the elite force lower because of the nicer trigger pull, but want the We tech upper because of the heavier metal upper for realism. Is that possible?
I dont think so, elite force lower frame is much more narrow and cannot accommodate the WE tech slide as it is too wide. They wont align on the rails properly.
i have we tech and acp aps g17 clone and had the opportunity to handle the elite force today and im not at all impressed with it.... first the gun's weight is just too light and the slide sounds weak and empty compared to the we. then when i looked at it and compared it to a real glock image in my head, the elite force just didn't look right... couldn't exactly put my finger on it since i didn't have a real g17 to compare it with... im still not quite convinced the elite force is worth all that extra money....
Abel Martinez no it won't not to mention if you managed to get it to fit and fire a round you will probably get smacked in the face by the slide. But natural selection is a bitch so go ahead and try it.
Have not tried and do not want to coax you into buying it to test it out and not have it work. I would maybe check on CZcams to see if anyone tried this. I may consider doing so for the future. no certain time at the moment on when that will be.
Elite force/vfc/umarex mags do not work properly in KJW/WE because the gas route seal shape is a marui type which is curved to match the marui loading nozzle which is cylindrical, the WE/KJW one has a flat seal and flat bottom loading nozzle, they might shoot but wont likely cycle your gun and wont be gas efficient you will also wear out the Elite force magazine gas route seal very quickly if you use it in a we/kjw. DO NOT DO THIS WITHOUT CHANGING THE MAGAZINE GAS ROUTE SEAL TO FIT THE OTHER.
The differences you noticed in the blowback unit is the fact kjw is a direct copy of WE tech so those are actually interchangeable.
The Elite Force/VFC/Umarex glock series uses a Marui type blowback housing which is a little bit fatter and has tabs in the front section that are fatter than the rest of the body meaning they wont fit in a we/kjw slide.
Marui type blowback units are what you want because they are highly upgradeable.
Umarex/vfc/elite force also use a marui spec hammer chassis and hammer assembly so we/kjw are also not interchangeable with the umarex/vfc/elite force (marui) type.
ty for all this info
MufasAilmz bir de ben bu seni bu güzel seviyoruz ya diye arama ben de çok olmak olacaktır ama artık seni yine ama diye ama merhaba sevdiğini yine gitmeyecekmiş sevmedim bir merhaba daha bir bilgi para merhaba bir ben bir sana de
i changed the hopup and inner barrel from we-tech to maple leaf and you'll see better results !
Nicely made video. I'm leaning toward the WE tech because I can get it for cheapest by a good amount and the quality and longevity seem good
Well done video and informative , still contemporary info, you should contemplate to make a series like this, comparing airsoft guns and compatibilities , cheers Max.
Holly molly a small arsenal you got at home ...respect
One major issue I had with my first KJW KP17 was the rear sight screw. Its located in the blowback housing keeping it connected to the slide. The screw is small and stripped easy. The threads kept coming loose and I would notice my rear sight and blow back housing would get loose with every magazine shot, possibly from the shock. I had to use loctite blue to stop it from falling apart.
WE Brand also has the same built you should change your rear sight to steel and get longer screw to hold the slide bbh and the sight
thats so great of you to have different brands on hand to compare, it would be much appreciated if you can do a mag compatibility across them. e.g. if WE mag can fit in Umarex or KJ Works, vice versa. This could be one thing we want to know. Nice work btw
I love how glock makes its own bb guns and how they make them look so real czcams.com/users/postUgkxnX9wE_Q8zvF75Y5iWzTU3Q4FlrtyGApQ , the only thing is that the slide doesn't move back. The sights and the body structure is so similar to a real handgun, fits in my hand perfectly but I actually ordered it with the 40 pack of Co2 tanks and they never arrived even though it said that they handed It to me. Was not able to test the accuracy since I didn't get everything I purchased which is frustrating and that's the whole reason why I got the bundle so it arrives together. So the Co2 tank happens to be a third party so it makes no sense to put it in the bundle if it doesn't get shipped at the same time, the BB gun arrived first then the Co2 tanks were supposed to arrive someday later but didn't, which doesn't make sense. I recommend just ordering the gun itself so you don't get the same issue I ran into plus there's no option for a refund. How stupid.
Hey Max, will the WE green gas mags work in an Elite Force Umarex Glock 17 gen 4 co2 pistol?
If so are WE mags different or the same for the entire WE line of Glocks?
Very nice video man, love your comparison.... only one thing, you may want to fix the cam setting so that it doesn’t change go change light setting all the time
Be good if you could reduce over expose too....
Thanks dude you have cleared that up for me. Going to have to get the vfc glock. Cheers
Glad to be of help!
@@MaxCherepenin I see that KJW pistols cycle perfectly, but they feel and look a bit "aluminium", so sliding parts might wear out faster.
Anyway, I grease mine up a lot. I have a KJW P226 CO2 version (KJW KP-01 E2).
Love Pantera, great shirt!
You demonstrated the magazines fit was interchange, did not touch on if they would interchangeably fire. will they fire and cycle interchangeably with no issues?
The we tech is made out of zinc alloy, a much cheaper and much weaker metal commonly known as “pot metal”. Heavier does not equal better quality or stronger.
xXAust1n46Xx it can depending on your purpose for it
You can buy the other versions
A thicker pot metal can resist better than a thiner aluminum
xXAust1n46Xx Kjw uses pot metal too
Oh and kwa as well
Zinc alloy cast parts usually have weaker tensile and yield strength but usually have much higher impact strength than cast aluminum parts per geometry and have better cast tolerances usually. From the weight my best guess is the Elite Force Glock slide have higher aluminum content (maybe ZA-27 or completely aluminum based cast metal?) than the others. There are always trade offs in which material you choose but I think each have their merits. However I was not impressed by the smoothness of action for the Elite Force Glocks. Also If i'm not mistaken the weight of the WE slide mostly come from the blowback housing being very thick and uses a heavy casting metal.
I think it's a pawl-type in Elite Force, compared to KJW and WE that uses wheel-type in hammer slide.
great vid but the elite force mag will actually hold about 24 plus 1 in the chamber
The silver we tech glock looks so nice
No, no it doesnt
@@oogyboogytom5677 dude that’s his opinion
@@chimken1456 And that is my opinion. So are other people allowed to have opinions that I shouldnt be allowed contradict with my opnion?
@@oogyboogytom5677 It was just how you stated it like a fact that it looked bad, when it’s not
@@chimken1456 well i dont give a flying fuck. Maybe view it in a different way then youll see
does the we tech slide work with the elite force frame?
Great video, seriously. Answered a lot of my questions I've been googling the entire day about. Think I'm gonna go with the EF version, weird how the FPS is supposedly so low here as the site I'm planning to purchase it from claims about 112m/s (roughly 360FPS?)
cant conclude without range test! its the important bit
Yea
Indeed
Yeah bro how do you have a comparison video without f****** telling us which one shoots better
Nice comp review, I like it.
Thanks Ron, this is becoming my favorite glock now haha
Glock perfection
LIAR!!!
@@gaston_clock721 fuck off dude
Very helpful video thanks
The Elite Force is closer to the weight of the real steel. 23. 2 oz the real steel is 22.75.
The real steel weighs more then twice as much
@@josuecabrera5053 How much does the real steel one weigh then?
also have to take in account of the weight of the bullets
@@josuecabrera5053 lol thats not true. I have one.
Very good comparison video. I'm looking forward to your thoughts on the Elite Force Glock in action. Oh, and nice shirt too.
Yep there probably will be something of a video with me sharing my thoughts on this glock. 100% positive so far! and thank you!
Nice video man
Thanks man!
Haw about holsters/accessories fitting? I'm working with gen4 glock 19 with Olight pl mini light and i'm looking for airsoft glock that fits real steel duty/kydex holsters with that light
Get a black hawrk Omnivore the fit any gun with a tlr1 or tlr2.
Love the pantera shirttttt
Hey mate, can we "'release" the slide of the KP-17 by pulling it back like the other glocks ? I don't know if you understand but I'd like to know ^^
You mean power stroke it?
good vid bro
Thanks!
You get a thumbs up for the shirt from me \m/
Thanks bud!
Which one is the best replica softair glock? Make, model and brand. I have in mind a $200 budget. Thank you.
You can not use Umarex and Tokyo Marui mags on WE and KJW and vice versa, since the first two have a round piston chamber bottom, while the second two have it flat. They will click into place, but there will be a lot of gas hissing to the sides.
Easy, i use tm mags on we, just had to change gas route, takes 2 min max
Hey nice video there!
Could you inform me how long slide of tokyo marui glock 17 gbb would breaks?
And if you have suggestion, I'm typically not wanted to upgrade my gbb, I just looking for gbb that out of the box are have decent performance and great durabillity without upgrading them, so what I should do is just maintenance them, could you suggest what brand of glock 17 type of gbb that I should pick?
Hey I know this vid is kind of on the older side, I was going to get one but I really want one to mimic the actual feel of a real Glock ( not interested in how they look because they all look good in my opinion ) but more of firmness & feel, from your experience of course. Also, what would you pay for these as of 2021?
I payed my WE g17 150 euros in 2022 note because I’m in Europe it probably costs less in America
1 more question: the thread in the front of the barrel for a silencer or a tracer? Which one has a threaded barrel and which one hasn’t ?
Which one gives the most power? And aside these which pistol air Glock has more power
I realize this is kind of an older video but would you have any recommendations out of the three based on prolonged use?
I was wondering would a we glock slide fit on a kJ works frame, they sell these gen 2 frames but they are replacements for kJ works but I was wondering if I could use it to customise a gen 3 we glock, is that doable does the slide fit okay?
Which one was the easiest/cleanest to get the orange tip off?
Hey dude, do you think fab defense cobra stock will fit these? i want to build something crazy.
great help for a newbie like me... nice shirt by the way...
Here to help! Thanks for watching!
is the umarex glock 18c full auto barrel threaded? i went with we tech because i knew there barrel was threaded and i wanted to attach a tracer unit. plus it was half the price.
i still plan on eventually buying the umarex version too because its the fully licensed version.
Does the we tech take metal billets and where do I buy it and is the site legit
i saw the reviews on crowns airsoft for the G26 or it could be any of there products, the people that gave it a review said that there stuff never came in or they have been waiting for months and it still hasnt come in yet can anyone confirm if this is true or like has the same problem?
Either I’m Jesus or I have really good magazines, but I got 95 shots on one gas fill from my WE G17
Pepperoni Dog Fart what gas do you use?
i get 100-150
Hi jesus
i get like 10
I get like 5 mags in one gas fill
Im a leftie but I shoot airsoft guns with my right hand. I do alot of things with my right hand
When you pull back on the EF slider it seems to catch at first. Is this more realistic or a flaw?
I wanted to know which one is the loudest when firing and the strongest?
Do all the glocks featured can use the same suppressor? I know the WE has a threaded outer barrel and is compatible with the WE P-virus (Custom P226) striker compensator. Just curious if the others could as well.
SO only the WE has that threaded barrel in this video. I am sure that the EF has a barrel swap out there that has a threaded barrel to use to mount a suppressor.
And most parts of WE brand and KJW are interchangeable but not the frames like gen3 to gen4 swapping its not a plug and play but rest of the parts are interchangeable
Our of curiosity does anyone know which ones fit real glock mags?
No one
nice shirt dude \m/
Thank you sir!
Waw amazing Nice il likeit kolektion glock.
How to remove the bottom plate of the kjw glock to fill gas?
One thing you failed to mention is that the Elite Force's mag gasket is the arched type. But the WE and KJW's are flat.. Yes they would actually work, but there would also be leaking of the gas if the WE or KJW mag was used in the Elite Force or vice versa.
But the drawback possibly is the slide compatibility, you probably won’t be able to swap the Umarex slide onto the we frame and vise versa cause the frame internals are different on the two being the Umarex vs the we tech :( have you tried swapping slides and see if they function properly? Just wondering (as in the we slide on the umarex frame or the Umarex slide on the we frame? Let me know if possible thx :D
Great video. WE tech for the win though
My Glock 17 umerex gen 5, it's Mag match or not with bell mag ?
Good video tnks
Thank you sir!
Which one do you think is the best?
where did you get the strike device thats on the KJW glock? been looking for one forever
Can WE glock 17 gen 3 blowback housing be installed on TM G17 gen 3 slide?
I'm interested in glocks
The pros about the elite force is that they already comes kinda tune up good quality parts and we tech stocks sucks but once you buy custom inner parts it will be more pro accurate than elite force and pieces are everywhere also elite force sometimes are out of stock if we talk about gen 3 😢 I love all the same just like my cats 😅
I guess all of these three might be pretty all good, but I tvink I'd personally lean for a KJW if I was up to buy an airsoft G17..
Why the KJW?
@@greenreaper3633 Have just several times over the years heard good things about it. Owners of them usually got their experience to share.
Link for where to buy the elite force ?
On my elite force glock, I sheared off the edge of the mag release where it catches the magazine while doing aggressive reloads. It randomly drops mags while shooting now. I recommend upgrading the mag release to a real steel quality, which i plan to do. Hopefully i don't break it again.
I have a KWA HK Match that drops magazines too, however its brand new and has done it since opening the packaging. Its mag release is completely different since its HK, so idk how i'll fix it. Is this common on airsoft guns? I'm not sure how i'm supposed to use them to train or even use them in a game if they are this fragile.
Its could be a weak magazine catch spring, or just that it has been abused so much to the point that the plastic is worn out and fails to hold on to the gun while it shoots. Disassemble the magazine catch and inspect for damage.
@@sneez9461 On the glock i know for sure its damaged. It happened only the 3rd time i took it out. And i only put a couple of mags through it. On the HK, it was dropping mags right out of the box, brand new.
@@musician445 I understand, bur sadly i dont have experience with KWA pistols, only glocks... What could it be? You should take a slow motion video and see exactly when in the blowback process the mag falls out, i do it often to see whats wrong
Are those type of muzzle accessories called “Strikers”?
Umerex seem to need to beef up the slide with inner rails ???
KJ fever
Can any of them remove backplate for a custom one?
Really like the Umarex Glock 17 gen 4, licensed by Glock, nearest CO2 to the real thing
Both my WE techs, G17 & G19, are fully trademarked. Slide, barrel, grip, and mags are all fully trademarked.
Thats because yours were made by HK3P factory.
@@ozflyer1 Hey thanks for the info! I had no idea they had multiple factories that make different ones, like guitar companies do.
Hello and thanks your Cousion from over the pond Lol
I will be buying a WE Tech glock 18c, I plan on using it extensively. Anything I should know about it? How long should I expect it to last? I’ve heard the hammer is weak on the g18c and to use lots of silicone oil when using in full auto
HOnestly just taking care of it will go a long way. Mine is about 5 years old. Hammer I have is still oem. I have the gaurder one and still have yet to use it lol.
mine came in, i ordered it from crown airsoft reluctantly, but the gun and the site did not disappoint. i have done a couple full auto mag dumps to test the strength of the gun after reading of how fast it breaks on full auto. i make sure to keep my mags lubed on all seals along with the loading nozzle inside the nozzle, and around the area where it tends to crack with the return spring and guide rod. still in working condition, i use propane in mine btw thats why i lube it so much lol. i believe they're making newer models as well seeing as mine came with no glock trademarks at all and an orange tip, the barrel and slide do have the WET trademarks on it tho so it is a WE Tech. It still has the g18c 9x19 tactical on the slide.
Buy the version gforce glock 18 we is full upgrade of factory
i already ordered the regular g18c it's still working great after numerous full auto mag dumps, i use alot of oil around the seals, and by the nozzle where it breaks. i used a razor to shave the tip of the corner where the nozzle breaks at to prevent friction with the blowback housing. still working great. will be buying ugrade internals for it, having a hard time finding an upgraded hammer assembly tho.
Where can i order a we tech g18c?
Are the mags interchangeable?
I noticed the elite force mags are like $50…
We mags work in vfc / elite force. I recommend changing the gas router to a nineballs tm17 gas router for better gas efficiency. And filing where the mag release catches the mag, so the mag can sit a tiny bit lower.
I think that KJ and Wei follow TM design ?
WE TECH for me, now to decide on 17 or 18 and which GEN lol...
Can you switch slides between them all?
I dont know why you called having an aluminum blowback housing cheap when custom tokyo maruis are literally swapping out stock bbh with aluminum made ones
just picked up the elite force G17 gen 4 and was wondering if any one had or knows of any barrel extensions or attachments for the internally threaded barrel. thanks!
Nice man! Not sure i never came across something like this. Thanks for watching!
I've seen barrel extensions that raise the fps to 370, I'll try to find a link
Thank you for a nice review. I would highly advice to start observing the firearm safety rules (at least the main 4). One day you may want to move on to real guns and having that finger on a trigger may cost someone a life.
Good advise.
Pussy
Snipper Fox14 pUsSy
Shut up you tit.
It's an airsoft gun. Obviously he knows its fake, and if he were to get real guns he would definitely have learned the rules and probably knows them. So does every airsoft player/
Elite Force Glock 17 for the win!
I bought a 18c from elite force and after the first week it broke, when I shoot even on BB through the hammer will hit the valve and spew all the gas through the gun and out the inner barrel, idk how to fix it and I can't send it back
Cas inc. idk man. You must have done something wrong I have no problems with my G17
@@dangerousfreedom5340 I literally did nothing to it I even lubed it up well in all the parts where it should and it's still doesn't work
which is the best one
Are the lowers interchangeable with the uppers? For example, if I want the elite force lower because of the nicer trigger pull, but want the We tech upper because of the heavier metal upper for realism. Is that possible?
I dont think so, elite force lower frame is much more narrow and cannot accommodate the WE tech slide as it is too wide. They wont align on the rails properly.
Max Cherepenin how about a we slide on a kJ works frame?
i have we tech and acp aps g17 clone and had the opportunity to handle the elite force today and im not at all impressed with it.... first the gun's weight is just too light and the slide sounds weak and empty compared to the we. then when i looked at it and compared it to a real glock image in my head, the elite force just didn't look right... couldn't exactly put my finger on it since i didn't have a real g17 to compare it with... im still not quite convinced the elite force is worth all that extra money....
Dude...Are you sure?? So true
You pay for the official license
Is the we 34 better than the elite force 34?
Question: can the slide interchange with each other or elite force is proprietary?
I would say EF is proprietary since the insides are different and will not fit right with other company variants.
I need to know if a slider of a real Glock gun fits on one of those air soft pistol’s real
Abel Martinez no it won't not to mention if you managed to get it to fit and fire a round you will probably get smacked in the face by the slide. But natural selection is a bitch so go ahead and try it.
Kj is the best😆
Quick question Max will a We Glock 27 be compatible with an elite Force Glock 19 magazine???
If it’s the same as the g19 mag, it should fit. Most of these are universal fit.
where did you get the custom glock baseplate?
Ehobbyasia.com
Will the 50rds mags from umarex or any other be compatible with the we tech Glock
Have not tried and do not want to coax you into buying it to test it out and not have it work. I would maybe check on CZcams to see if anyone tried this. I may consider doing so for the future. no certain time at the moment on when that will be.
Most importantly: accuracy and dependability please
Did he compare slides? If so when
so can the WE tech mag fit in the elite force glock and still work?
Nope, you would have yo change the gas route, (the rubber lip on the top) for it to work :)
Is it a threaded barrel elite force
Isthe Umarex Glock slide racking accurate to the real Glock?
Are the parts interchangeable?