Mogami W3082 Could Be The Best Sounding Speaker Cable For The Money
Vložit
- čas přidán 8. 07. 2024
- Mogami W3082 Bulk Cable: ebay.us/kr589n
AudioQuest Sure Grip 300: amzn.to/40AyiMq
Shrink Tubing: amzn.to/3N6FnBq
Bulk Shrink Tubing: amzn.to/40zfey4
6mm PET Sheathing: amzn.to/3n65dLb
Teflon Tape: amzn.to/3LqFOFF
RCA housing for Y Joint Protection: ebay.us/Upmqod
Or
You can get them here ready made: amzn.to/3oENiMg (No Affiliation)
If you use these links above to purchase any items from Amazon or eBay(No Extra Cost To You), I get a small percentage which help support my work and helps me keep going.
#hifi #audio #tharbamar
☝️Be careful of scammers in the comments or social media platforms who pretend to be me and trying to scam.
👋I'm not hosting giveaways or asking you to contact me.
👍A real comments/replies from me has a GRAYED OUT profile name just like this comment.
Thanks for watching!
How do you rate your two speaker cables the Mogomi 4132 VS the w 3082? I made both of them and can tell much difference.
Today, which do you think is the best one?
Tried the wire. It's very good. I didn't use banana plugs.
Fantastic work! Those look fantastic! I bought these assembled from Worlds Best Cables on Amazon. They do make a difference in overall sound quality. I went and swapped these W3082 wires out to try out those Mica OFC Steve Huff was saying are fantastic. Steve needs to clean his ears. The sound went from lively and dynamic, to a wet blanket. Mom was here, and asked what did I do to the speakers? I told her, and she snapped at me to put the Mogami wires back in. The Mogamis are the real deal.
Hear hear, thanks for sharing 👍
Thank you very much, I built one as you said and really the sound has really improved, it's worth the money, you're great
Perfect, I was looking at ordering cable and I think you have just helped me decide which one I will order. Thank you
Hello
I made 2 Mogami speaker cables from Mogami W3082. They sound fantastic to my Wharfedale together with my Audiolab 6000A. Drove with Van den Hul clarewater before. So thanks for the tip.
I use this cable from few years, and it's the better cable that you can found at this price... Thanks Tharbamar for that very good video...
Hey man!, you are so right about the mogami 3082 speaker cables. They are so detailed I would recommend these cables due to their transparency and detail. I bought them from Amazon. Thank you for your review.
Definitely going to try these. I already use pro cable XLR, and RCA, for my interconnects. WBC to be exact. They make great cables for the money IMHO. ✌️
I ordered the W3082 based on your recommendations and sound demos yesterday. I also purchased an SMSL -SU1 DAC and paired it with a WiiM Pro. The cable will arrive next week. I did consider making them as you suggested here, but am so busy and the price point is so fine on the links provided. Many thanks.
How did it end up?
Nice! Thank you for this. Excited to try it
Pretty nice speaker cables. These are what I currently use and they have good body and detail. I have Magnepan 1.7s powered by tube Monoblock amps.
Thank you
Blue Jeans Cable "10 White", 2×3mt terminated, by Belden 10 gauge user here.
26€, used, mint condition.
Awesome speaker cables.
I might consider purchase Mundorf pure silver wire for diy, and that's it, done with speaker cables.
Excellent speaker cable indeed. Thank you for the tutorial, please bear in mind the longer you make the split ends, the worse the cable becomes as a whole. They should be ad short as possible 😊
Thank you very much! This type of video is extremely valuable to us.
I’m glad I could help 🤗
I have made a 2.5m pair with W3082 based on your video, it is indeed with high resolution, natural sounding with excellent tonal balance notably with tight bass, and with good sound stage depth too. Thanks, Tharbama
Great to hear!
I just bought the cable, can’t wait to try it this weekend, I will use Furutech FP-201 Gold spade connector with it, hope it will works better than my Gotham 50040 cable
moron
Auvio, with a V not “audio” but “AuVio” branded speaker wire when you can find it is pretty amazing stuff. Great video!!
. Just built a pair. Compared to the W3104 I've been using, definitely more detail / resolution, however the sound stage and depth seem slightly diminished by comparison for some recordings/pressings. Really comes down to the source and type of music with these..
Thank you !
Hi! Thank you for the video, I have been watching them for a long time. It seems to me that a cross -section of 2x2mm2 is quite low. As far as I can judge, the cross -section is of greatest importance. Nice day! Jrd
Love your informational videos, can't wait to build me a home theater setup. But I have a question I hope you could give me your opinion on, do you think these cables along with the likes of the 4S11 or W3102 would work well for car audio as well? I've been into the car audio for some time and although its not an ideal listening space I was curious if it would have any benefits. I also recently got a house so now I can start piecing a home setup in time as well. Hope to get some input, keep up the informative videos.👍
will be trying soon, will update with results in a few weeks :)
ok a couple weeks from now 😅
Hi Tharbamar,
You do a great job, I learn many things from you and I like that you analyze accessible products for the great majority of HIFI fans.
Seeing your Mogami and Canare cable videos, I have wanted to manufacture some, I would like to make some to biamplify the speakers, taking advantage of the double outputs (A+B) of the amplifier.
That you would advise me for this: use Mogami W3104, two cables per channel of W3103, two cables per w3082 channel or do it with Canare 4S11 or Canare 4S11G.
I don't know, you still think it is not worth biamplifying, but for the price of these cables, it can be tested, without spending a lot of money.
I hope you have a minute to answer, keep your good work and be happy.
Greetings from Spain
In your case I would use W3802 for Highs and W3104 for Lows, Thank you.
I used to have these cables. And always regretted selling them. Will buy them back, after all those years of testing other cables, because they are really the most natural sounding cables I ever had. At the time I had dynaudio's, and dynaudio sold coaxial speaker cables called OCOS, made in Switzerland. Never understood why they were discontinued. Mailed dynaudio for that matter, but never got an answer. It is even possible to achieve better performance when you double of tripple these cables and twist them together. Dynaudio used to sell tripple ocos, at crazy prices at the time. Because of the small diameter, and while other brands had 'fat' fashioned cables, dynaudio moto was 'fysics vs fashion' and they were right ! even today, some excellent things always remain !
thats a good question. i am struggling with the point of using the shield for 1 line and the core for the other.
wouldnt it be better putting 1 cable for 1 line?
as i am bi amping this means 4 times the invest. dont know if i should go with it….
Great video, thanks for sharing. I was thinking of building a AQ Rocket 44 as I had some AQ 500 Bananas. Would your opinion be that Mogami 3082 is better than Rocket 44? Does soldering them make a difference?
Also have you tried the Mogami 2804 speaker cable? I found these very transparent and revealing.
Glad to see you are not contaminating the bare copper with skin oil! Also, at the speaker binding post, put the red (positive) plug in the UPPER post; just to see if u hear a difference. Let me know. Thx.
I put both red and black in HF post on my Wharfedale. Smoother and warmer sound, it's the best on my system.
@@handokosetiawan2803 Because signal path goes to the high end first which is more delicate! Extra contact makes a big difference!
@@mikeeygauthier2959 Thx 4 the explanation.
everyone knows red sounds the best 😅
Thank you for the great video. I am kind of confused about which cable to choose the one in this video or the Mogami W3104 that you made in the previous one. Which one do you recommend most from your experience?
I can buy ready made 3m. 3082's direct from Mogami for quite a bit cheaper than these -- but their construction is somewhat different from yours in that the outermost coating seems to be just the black plastic material rather than the grey sheath on yours. DId you add that sheath? And in your opinion would adding the sheath plus the other items you add make them sound better?
Thank you for great videos.
Which amplifiers speakers switch box (2 amps into 2 sets of speakers) can support A /B testing without deteriorating or changing the sound?
Douk Audio VU3 will be very useful for your needs.
i used mogami 2549 cables for interconnect. i like the sound. it is better than the more expensive nordost red dawn.
Yes, I've been telling everyone for long time.
czcams.com/video/2O0IABhWCMA/video.html
@@Tharbamar what's the difference between 2549 and 2534?
@@Anthony-cc8bx 2534 is in star quad cable geometry, which may makes highs slightly rolled off in some paring.
@@Tharbamar I see. So the 2549 is not rolled off as much? Have you used switchcraft RCA the silver ones?
Hi. If use rhodium coated Banana plug will it sound good? Or gold coated?
I took your advice and purchased Mogami W3082 premade by Worlds Best Cables on Amazon, everything you spoke about the performance is true. No colouration, tight separation and coherency, very reference / studio like sound. I can understand some people may find it boring or flat, but it clicks with me and my system atm.
Great to hear!
on amazon
@Tharbamar could you share how you created the jumper cables? Are those also Mogami W3082? 9:51
What jacks do you use??
Can you use one W3082 wire for Red and another for Black with the same results? I understand you would be using twice as much speaker wire. Would this work and if so, would the shielding float on both ends or would you combine with the center strand to make a larger gauge wire?
Thank you! and GO GIANTS!!
OK, got some. Hooked up two 7 foot cables. I hated them right away. I played my test songs for an hour. Then two, three. If someone says the cables need to burn in, I'm gonna grab them by the thro..... they do sound better. Shielded cables, suddenly it's clear, very clear. I'm missing something, maybe it's bad cables. These may very well be worth the money. Interesting, transparent is the only way I can describe them. 9 out of 10, they are getting better, the longer I listen.
Mogami recommends 175 hrs of burn in! 😉😃
Thanks for this info comparing to other Mogami w3104.
Would the w3104 provide a more extended treble, larger sweeter upper soundstage (Synergy with a warmish tilted high current class a amp)
Pls let me know your thoughts!
I went for this cable after watching your video. Wow! The resolution and detail are amazing. I had some basic QED cables before, and I was okay with the sound until I heard my friend's ESS AMT 1. Those HEILs deliver crystal clear highs compared to my Altec Model 7 system. With these cables, the "veil" and slight muddiness are gone, and now I have to get used to hearing so much information. I was a bit worried about listening fatigue, but I turned the highs down a notch on the speakers and now it's all good ! Thank you for the advice, this is certainly a great deal!
I’m glad to hear it, thanks for sharing.
@Tharbamar would you recommend these over Canare 4S11? which one would you choose from those two?
Back in June 2019, you did a video "Making the best Speaker cable......" but using Mogami W3104 cable. Four 12 gauge conductors in one cable. This is what I use in my system. How does this new cable compare? Thanks again.
W3104 is great, this design is a bit more better in noise control, resolution and accuracy.
Hi Tharbamar, much obliged if you do a video explaining the nuanced sonic differences you hear between your DIY Mogami W3084 and Canare 4S11 speaker cables.
Hi, I did in comment in one of my cable video but don't remember which video, so W3804 is slightly more transparent, 4S11 is a bit better midrange in my system, the rest is pretty much comparable, thanks
If your lazy like me lol, Tekton and Worlds Best Cables offer completed cables using the W3082 wire. I have some on the way, many thanks to Tharbamar!
Ordered W3082. Tell me in your opinion if you use when connecting not 2 as you have in the video, but 4 separate wires and, for example, to increase the cross-section, you can increase it simply by connecting the central + screen?! Or be sure to do a twist of the central with the central and the screen with the screen in each pair, respectively. Thanks.
Sorry I do not understand the question.
Since I based my decision to buy this cable mostly on this video (and other forum threads), I thought i'll warn people who listen to classical music. I have to total different high quality systems (chord qutest, dynnaudio and van medevoorts Mit interlinks). On both systems the sound was clear and detailed. BUT, violins and flutes were impossible to listen to: harsh, not a natural sound. my previous MIT Shotgun speaker cable sounded much better. however, rock and sounded quite good: quick solid bass, bodied tone's from guitars etc this explains why people are enthusiastic about this cable, but they just don't happen to listen to handel:) So I'd warn those who listen to classical music, really, don't buy this cable.
Hi Tharbamar, Thank you for the instructional video. Do you recall which speaker cable that you preferred, in your system, with the Knight 1s?
I’m currently using very same W3082 cable, thanks
Thar,
I had to stop and write this directly to you. Thank you!! Your content with cables is so refreshing and educational. Cabling is extremely important and yes there are those that say simply using a strand of wire is enough, but the reality is that cabling is a crucial part of an audio system. With that said, your series showing how to make the cables to me is invaluable and puts quality cabling available to those of us that live in reality and can’t spend hundreds of dollars for a single cable. I will purchase from you affiliated link as I want to support your content and just to let you know, I did follow through on building a set of speaker cables for my mains and the difference was noticeable and the cost was much much more bearable. Good job and once again thank you.
i am struggling with the point of using the shield for 1 line and the core for the other.
wouldnt it be better putting 1 cable for 1 line? do they have the same final diameter?
as i am bi amping this means 4 times the invest. dont know if i should go with it….
Hi Tharmabar, do you recommend doing the speakers jumpers with the same w3082 wire? do you have any video on how to make speaker jumpers? thank you
Yes W3082 is what I use, I do not have how to video for it thou, thanks
are there some bi-amp alternatives from this brand? Or need 2 cables to make a bi-amp set
I'll try again. In the video, to connect you use 1 cable divided into 2 pins "+" and "-" (central and screen). I want to use 2 separate cables (1 pair of a whole cable) for each acoustic unit when connecting. Therefore, I asked for advice if I put together the central core and the screen (by increasing the cross-section) in each separate cable, will it be normal for sound?!
That won’t be great idea if you want most clear sound, according to Mogami having coaxial conductors is main benefit of it but if you’re worried about the size, this cable is highly capable of handling high current bridge monoblocks driving to maximum load without any problems, I’ve seen it many times.
hello Thar, I am planning to do my own balance xlr cable, do you a cable you can recommend? thank you veyr much for your video
Hi Tharbamar,
Big fan here. I really like your work. I made several pairs of speaker cables with CANARE 4S11, after watching your video last year. I really like them. In your opinion would Mogami W3082 be a step up from C4S11?
Hi Aleks, W3082 will brings out a bit more clarity and micro details, thank you
I have a vintage receiver i would like to make these for. But, it doesn't have banana plug port on the back. What would you recommend for adapter for the receiver so i can plug this into?
Thanks
Another great video thanx!! Are these 2x2mm cables good for a 4 ohm(Dynaudio x32) speaker? Thanx 🙏🏻
Yes definitely.
@@Tharbamar thanx for your reply. Do you know the X32 speaker and if so what do you think of them?..
Quick question on the joint protection, I see them on eBay thx. Does the blue casing screw away from the chrome part or do you break it off some how?
You can twist it to remove the chrome part.
Hi Thar, always love your videos.
After i watch first video with W3104 (and i almost order it), now comes the second one with W3082 :)
Now i am little confused and want to hear your opinion.
Wich cables do you recommend for my system: EVERSOLO DMP-A6 Master Edition DAC/streamer paired with KEF Q950 speakers 3104 or 3082 ? And for interconnect do you like more mogami 2549 or 2803 ?
I will also use cables for home teather KEF Q series paired with DENON AVR-X4700H receiver.
I have kimber's 8VS at the moment and they are not so clear in mids and highs, sound is muffled a little.
Thank you in advance for helping me.
Hi, if you use subwoofer I would recommend W3082, for two channel only W3104 is better because it has deeper bass quality, thanks
I very like my sound of my system with Mogami W3104 cables especially the bass is perfect. How is the bass of your system with the W3082 compared to the W3104?
Thanks!
I'll give it a try. I ordered the w3082 cable.
I've finished the cable. First impression: I agree with you it's very good cable. Thanks for the recommendation.
Very interesting comments... How does the W3082 compare to the Belden 9497?
More open and better bass quality in my system.
I wonder if you could do two pairs of these to increase the gauge for higher current situations. Obviously leave the out pieces together and inner pieces together
Yes it should work great that way too.
@Tharbamar In Mogami do we have W3082 and Mogami 3082 NEGLEX OFC Co-Axial ..Both are different?
very cool! Are there any cheaper alternatives to those Audioquest connectors that are close in performance?
Ali express China.. Complete 2m pair Audioquest Comet 120 GBP.. These cables 3000 GBP 10 yrs ago.. Excellent copies
Will these be better than my present Chord Clearway speaker cables?
Did you also try to make jumpers using 3082 with shield as negative conductor? Using just the core conductor negates the effect of draining noise but maybe it doesn’t matter with such a short cable.
Thanks
Yes I’m using 3082 as shielded jumper wires for my speakers, it’s great improvement over any other type of cable including OCC cables.
How good is this cable in EMI rejection compared to Star-quad cables? Consider Mogami W3082 or 2972 star-quad.
My speakers are near the TV and wifi router so it's important for me...Thank you
Thanks for the tutoriel. I bought the same Mogami cable and will try to make own.
What is the reason using the teflon tape over electrical tape ?
Just to have more insulation.
Out of curiosity, which power cable do you use on your electronics? What are your favourites?
Thank you
PS Audio, Oyaide, iFi.
My favorite is my own shielded design, I have tutorials videos for that.
Quick question : Is there a specific reason why you used teflon tape to wrap the copper shielding rather thank using a waterproof or normal shrink tube? Thanks
It just to prevent adhesive directly touching the conductors. Thanks
Hi Tharbamar, are the AudioQuest banana plugs you used made of pure copper or brass? Do brass banana plugs affect sound?
Hi, AQ plugs are made of beryllium copper alloy, yes brass can make quite different in my system.
May i ask,if i unterstood well, the central(core) wire is the positive(+) and the other(the hairs) around it is the negative(-),right?
Thank you sir
Yes, correct. Thanks
Interesting and educational. But my colleagues and I did a blind test several times between different quality cables. According to the results, we could not deny or confirm that higher quality cables are better than cheap ones and vice versa.
May I ask speaker, dac and amplifier models was use to test it?
@@kennethz4466 Of course, atoll IN100 signature amplifier with dac module, rotel cd 14 mkII player / shanling EC3 cd player and focal aria 906 speakers.
Exactly. I sold my kimber kable monocle XL because there was a no difference with 10 times cheaper Atlas equator 2.0
The only reason one wouldn't hear a difference is existence of an already capable cable or lack of high enough quality components
@@bricebowlin8834 Maybe, but the differences are insignificant, the sound profit is small compared to the price of high-quality (read expensive) cables. Of course, even very small changes are important to an audiophile, and money is not important here.
Another great video. Thanks. Quick question, I'm undecided which speaker cables to go with w3104, w3802 and carnare 4s11. Do you have any recommendations. Thanks
I use all of them but I like W3802 a little more, thanks
thanks @@Tharbamar
Thanks for the video! I noticed that in an older video you preferred Canare (4s11) over Mogami (W3104). In this more recent video, Mogami (W3082) is your preferred option. I'm trying to learn a bit about these cables. Could you explain why your preference changed? I imagine these Mogami models (W3104 x W3082) have some differences and now you find the latter even better than the Canare (4s11)?
Hi, I use them all in the different systems and also change the cables depending on what I’m paring then with, it’s all about synergy for me, so I have like 8 different pairs of cables, thanks
@@Tharbamari would like to follow up on what Felipencl asked you. I would like to build one pair on my own. Money in the price range doesn't matter that much, they are all ok. I have the Wharfedale Evo 4.4 speaker and indeal would be a bi-wiring cable.
@@Tharbamarcan you please share your observed sound difference/s between canare 4s11 vs mogami?
I add a question, I read and see renowned reviewers recommending cable thickness tables which, to avoid the blanket or thick veil phenomenon, the cable sections are quite small and instead if I look at the section of the most expensive and noble cables they are always important sections. The question is which is the right section? clear that it also depends on the length but are the tables that are always equivalent to all the professionals in the sector who recommend cables with a smaller section or those important sections of the Top cables reliable? many thanks to anyone who can help me. good continuation
Thickness is nothing to do open sound, thickness and veil sound is more to do with geometry of cables, resistance and capacitance.
This cable is open and realistic than anything, I think I clearly commented on that regard.
There is no right or wrong you have to try to see if that is suitable for your setup.
Hello sir, which one is better between Mogami W3082 and Canare 4S11?
After watching one of your videos about 2 years ago, I made a set of cables using Canare 4s11, and have been pretty happy with them. I'm about to change listening rooms, and now will need longer cables. Would you recommend using Mogami W3082 rather than Canare 4s11? Thanks for posting all of your videos; they've been really helpful as I've begun getting back into hifi audio after about a 20 year hiatus.
Hi, thanks for sharing, W3082 is great If you like more resolution and noise control but 4S11 is great choice because I use both of them.
You make nice cables! but 14awg seems very small for my Magnat 1109 speakers (4Ohm). I want to make cables for bi-amping connection. Can you recommend cables with your experience?
14awg would be fine for 40hm, especially bi-wire. I assume you don't have your speakers 20meter apart.
Hi, wanted to know your opinion on attaching ferrite rings on speaker cables.
Hi, it should help to reduce interference if that is you’re experiencing but you have to attach it at one side only either - or + side by the speaker.
@@Tharbamar Thanks!
Hi Tharbamar what do you think if I use these w3082 as a double barrel shoutgun speaker cable, will it sound better?
I have not tried it yet to give you the right information.
1) The 3 "probably" references in the final half minute of the video may (or may not) have impacted on viewer perception.
2) If the cable links the amp at location "A" and speakers at locations "B" and "C", are the environments between A⇉B and A⇉C relevant? For example, room lighting, modem, television, PC, HVAC, refrigerator behind adjacent wall? If so, is speaker cable construction capable of mitigating issues?
3) If in a non-scientific, subjective listening test, a listener identifies a enormous difference in performance between cheap and expensive cables, is that perception capable of justifying the additiinal expenditure?
Cheers.
Hi Tharbamar.
I have FocalAria 906 . I was thinking to use mogami 3103 or canare 4s11 before this video.
Do you think 3082 would be better for Aria ? Wich one has better bass and calm highs?
Which one you choose? I have focal aria 906 too
I’m using Canare 4s11 with my 906’s and they sound amazing! I was using Amazon 12 gauge stuff before.. I will be trying the Mogami 3082 for fun but very happy with my Canare wires. It’s more for fun at this point. In my area both Canare and mogami are a few dollars per foot so why not try both!
Hi, thanks for the video. Searhing for this Mogami cable, I came across Mogami 2804 - almost 10 times more expensive, claiming to use PCOCC coper! Do you have any experience with this cable? Is it worth of price?
Yes, it is very good cable but don’t let the price fool you, W3082 is better cable in performance.
When finding to your excellent site I built speaker cable using Mogadishu 3104.
Are these new cable better, with all the subjective included.
Thx in advance.
Yes it is better in resolution and quietness but some might find it very revealing, thanks
Thar, Is there another RCA connector that you recommend as a substitute to protect the Y joint? Thanks.
Nothing in particular but I would stick with 1/2 inch diameter and plastic, thanks
Can i do this one run per polarity? So both the shielding and the central core go to one banana plug?
Yes definitely.
Do you think it would make a huge difference?
Hi, here's a question from those of us that lack the time or skill to build the cable. Recently, I purchased a set of the World's Best Cables made with Mogami 3082 Wire & Eminence Gold Plated Banana Plugs. They come in equal-length pairs, but for my use, equal-length worked for my need. If you've tried them, do you think their sound quality approximates what you've built?
Hi, It should be the same sound quality.
Hello Tharbarmar, can you recommend decent XLR cables for the price? You mentioned that XLR sounds better than RCAs and I am in search of good XLR cables. Thank you!
Try Mogami W2549 or Canare L-E6S based XLR cables are great buy for the price and quality.
@@Tharbamar just purchased Mogami @2539 to connect the DAC and I'm loving it. Thank you Tharbamar!
Hola Tharbamar, tengo una duda y me gustaría que me la aclarases, si es posible. La cuestión es si 2,03 mm² de sección son suficientes para todo tipo de altavoces o únicamente para equipos hasta una determinada potencia. Gracias de antemano y gracias por compartir tu experiencia. Saludos cordiales
I add a question, I read and see renowned reviewers recommending cable thickness tables which, to avoid the blanket or thick veil phenomenon, the cable sections are quite small and instead if I look at the section of the most expensive and noble cables they are always important sections. The question is which is the right section? clear that it also depends on the length but are the tables that are always equivalent to all the professionals in the sector who recommend cables with a smaller section or those important sections of the Top cables reliable? many thanks to anyone who can help me. good continuation
Anyone in here read the article about an older asain guy that builds his own cabling/wiring & builds his own crossovers to reveal the sound the studios actually recorded & is meant to be heard????
Thank you for your videos! I built a Mogami a 5 foot 3103 cable from your 3104 video. Now I'd love to make W3082 cables. What is the maximum run you'd recommend for the W3082 since they're only 14 gauge? Or is that not something to worry about?
I have 15 foot W3082 cables in my rig, no issues that I can hear or tell. I'm running both Magnepan and Zu's, so both spectrums in regards to sensitivity.
How do you compare your Mogomi w3104 cable to this Mogomi w3082 cable? I followed both of your videos and made both of them, and I’m now sure I can tell the difference.
What do you heard differently in them?
Which do you now think is the best one?
W3082 is a little more in resolution in my set up, I’m using both of them in my system, thanks
Hello I Just Ordered The Mogami 3082 On Amazon .. Going To Try Them Out This Friday .. I Have Kimber Kable Connected To My Left And Right. What Will Be The Difference In Sound In Your Opinion? 🤔 The Kimbers Sound Good But What Ive Heard The Mogamis Will Sound Even Better ... Thanks For Your Answer 🙏
Sound is subjective but must try back to back to hear which one you like better.
What are your current suggested interconnects between #1 CD to DAC or Amp and from the DAC to the Amp? I am interested in RCAs? Are any of these available on World's Best Cables too?
I would suggest you to try Mogami W2549 based RCA cable from them, thanks
@@Tharbamar Mogami W2549 is still your favorite interconnect even after reviewing Oyaide, Viborg Audio, and Canare interconnects??
How long did it take you to make 2 cables? It’s taking me like 3.5 hours to complete just one lol. Still got another cable to make but that’s tomorrows and the following days task after work. Love your videos!
Probably It took me about 40 minutes each, thanks
@@Tharbamar wtf :( you a beast
@tharbamar would you recommend these over the w3104?
All cases by case because I use all of them in different needs It’s all depends on the paring components and personal preference.
I think I asked you this question before. Do you make the cables for sale? If yes, how can I purchase them?
I do not sell them, thanks
What wire did you use to make those jumpers on your speakers? And how does it(w3082) compare to the Mogami W3104 cable? By the way , I finished making both pairs of Mogami w3104 with Viborg copper Banana connectors and Canare 4S11 with CMC SWISS Pure Copper Bananas that are more of the style of the Audioquest's and Parts Express type of banana. I haven't listened to the Canare's yet but the Mogami surprised me, really surprised me as I replaced my Kimber 8tc with WBT expanding bananas($55.00 * 8 of them). The sound transformed my ATC's, I was shocked. Now I want to redo the ends of the Kimber's; I'm wondering if I screwed up the connections. But they're a pain in the ass to strip all those ends so I purchased a German made Knipex automatic stripper to hopefully simplify the job. At this point I might go ahead and pick up some w3082.
Hi, all my jumpers are made of W3082 using just core conductors connected.
I like W3082 more than W3104 personally.
Wait till you try RCA interconnects made with Mogami 2549 microphone cable. One wire hot, one wire return, with the shield connected only at the source. Superb neutrality and transparency. Total cost for a 1-meter pair, including Rean Neutric connectors is less than $15. They smoke my $375 Tara Labs RSC Prime interconnects.
@@ChicagoRob2 Now those Neutrik connectors are brass. Have you thought of using something with copper contacts like WBT WBT 0144 Gold Plated Locking RCA Plug? They're inexpensive enough but my concern is all the additional mass of the metal.
@@mortlach186All of my Neutrics are copper-based, as I stock-piled them years ago. I’ve built 2549 interconnects with WBT, Audioquest, Nakamichi, and Switchcraft connectors. All sound great and I would say the copper-base, gold-plated Switchcraft are probably the best bang for the buck.
Hai is it better than w 3104?
Hello Thar, evidently the W3082 is out of stock on that link. Do you have any other source?
Hi, performance audio is also great place to get them, thanks
Why not the multi core shielded mogamis