Manually Drop Forging a Wrench in a Home Workshop

Sdílet
Vložit
  • čas přidán 11. 05. 2024
  • Bondi Bond Waitlist: paskmakes.com/bondi-bond-wait...
    This was originally going to be a quick video for my Patreons but I got a bit carried away with it and it ended up being a full build video. It was more about seeing what was possible with stamping into hot steel. The wrench could definitely be better but I learned from it and I really did enjoy the whole process.
    Big thanks to Brodbeck and Gameco Artisan Supplies for supporting my channel
    brodbeckironworks.com
    www.artisansupplies.com.au/pr...
    Get in touch with Troy for touchmarks
    bit.ly/OntheMarkEngraving
    Niroc Tools that I use in just about every project
    www.niroc.com.au
    As always I'm happy to answer any questions.
    If you would like to support this channel you can do so here
    / paskmakes
    You can also help me out by purchasing one of my shirts, you can find them here paskmakes.threadless.com
    Check out my new website
    paskmakes.com/
    Check out my Instagram to see more of my work / paskmakes
    Also you can check out my photography at my website (nothing to do with making but you may be interested in what I do) www.neilpaskinphotography.com
    My email can be found in the about section of this channel.
    For real mail,
    Pask Makes
    P.O BOX 768
    Yandina
    Queensland
    4561
    Australia
  • Jak na to + styl

Komentáře • 424

  • @PaskMakes
    @PaskMakes  Před měsícem +27

    Bondi Bond Waitlist: paskmakes.com/bondi-bond-waitlist/
    This was originally going to be a quick video for my Patreons but I got a bit carried away with it and ended up being a full build video. It was more about seeing what was possible with stamping into hot steel. The wrench could definitely be better but I learned from it and I really did enjoy the whole process. :)

    • @fletchro789
      @fletchro789 Před měsícem +3

      I love how you show that you are still learning in every video! When the wrench came out longer, you simply stated, "I'll consider that a practice one." That's such a great way of thinking about unexpected results!

    • @lourias
      @lourias Před měsícem +1

      I am not a metal worker to the extent that you are. However, would it be better to make your "Pask Makes" stamp a little deeper within those letters for a more defined stamp?
      I know that camera angles can make things a bit clearer or not clear enough.
      Perhaps you could make a 2nd stamp so the opposite side gets stamped at the same time. These are ideas, not facts.

    • @KeithOlson
      @KeithOlson Před měsícem

      An enjoyable process to watch, as always. Thank you for sharing your shop life with us.

    • @GetFochdYT
      @GetFochdYT Před měsícem

      What is that mask you use for grinding? Is it constan5 positive pressure?

    • @KenFullman
      @KenFullman Před 4 dny +1

      "a bit carried away" Just a bit? 🤣

  • @chrism9502
    @chrism9502 Před měsícem +221

    I came to your channel years ago for the interesting woodworking. I've stayed for the excellent video-crafting, calm and clear explanations, wry humor, willingness to share mistakes, and the consistent desire to learn new things. You make fascinating videos. I'm pretty sure I'd enjoy watching you replumb a toilet, if you presented it in your normal manner. Thank you.

    • @paulmartin7737
      @paulmartin7737 Před měsícem +7

      This is exactly right, Mr Pask shows us everything in a warts'n'all manner, and we learn more in the process

    • @docolemnsx
      @docolemnsx Před měsícem +3

      Let me rephrase that: I came here for the woodworking, I stayed for the metalworking 😅

    • @PaskMakes
      @PaskMakes  Před měsícem +12

      Thanks Chris, that makes me happy as I'm still never confident when I release a new video. For some reason I was especially unsure about this one. :)

    • @dirkkrohn1907
      @dirkkrohn1907 Před měsícem +1

      @@PaskMakes I'm still listening as I type this and this one has been great so far in my opinion. I found the sound of the surface grinder almost sci-fi in a strange way, kind of hard to explain how so thou.
      Edit - Saw the final result of your hard work on this one and I feel that you didn't do half bad with the equipment that you had available to you. Keep up the good work mate.

    • @panathlospanathlos8288
      @panathlospanathlos8288 Před měsícem

      Well said. Could not agree more. Thanks for the content

  • @alexiskaas907
    @alexiskaas907 Před měsícem +117

    I love that you aren't afraid to show us your learning process. The first wrench ended up being a "practice" piece, but it still made it into the video! I think it makes your work more accessible to hobbyists and gives folks a much more realistic idea of what it's like in the workshop. Thank You!

    • @DrSbaitsojr
      @DrSbaitsojr Před měsícem +3

      100% agree

    • @1pcfred
      @1pcfred Před měsícem +2

      You can't expect the first time you do anything to create your magnum opus piece. That tends to happen later on.

    • @PaskMakes
      @PaskMakes  Před měsícem +5

      I always wonder if it draws the video out too much but it's all part of the story. Glad you enjoyed it. :)

    • @PaskMakes
      @PaskMakes  Před měsícem +4

      @@1pcfred Nearly everything I make these days is a one off which I learn from. I always think how I could improve if I did it again but I rarely get back to them. :)

    • @lordmemester8798
      @lordmemester8798 Před měsícem +1

      Yeah, this is really important. I always worry about getting it wrong so I rarely ever try. Stuff like this encourages me to just give it a go!

  • @johnfisher7143
    @johnfisher7143 Před měsícem +34

    Way more character than anything you could have bought, and every time you use it it’ll give you pleasure. I really liked how it turned out.

    • @PaskMakes
      @PaskMakes  Před měsícem +5

      Thanks John - that's exactly why I make these things. :)

  • @rebel4466
    @rebel4466 Před měsícem +43

    All the forging videos really show how much work a blacksmith did back in the day. Especially projects like the hand prosthetic of Götz of the iron hand. Insanity.

    • @PaskMakes
      @PaskMakes  Před měsícem +6

      Forging really is hard work. This wasn't too bad but the legs I made for may last project was a work out. :)

  • @riccardo-964
    @riccardo-964 Před měsícem +30

    I love how you experiment, learn, redo it, learn again, test, experiment, go over, hand sand it, etc. Thanks, Sir.

  • @captbuscemi
    @captbuscemi Před měsícem +29

    Love it! Always impressed with how you jump in and have a go at new techniques, and your honesty in documenting little errors and how you get back on track. Always entertaining and inspiring 😊

    • @PaskMakes
      @PaskMakes  Před měsícem +4

      Thanks Capt! There really were plenty of errors, glad you enjoyed it. :)

    • @1pcfred
      @1pcfred Před měsícem +1

      There's always a first time for everything if there's going to be any times at all.

  • @G.S.W.SewmesomeMusic
    @G.S.W.SewmesomeMusic Před měsícem +19

    Pask and Sunday morning coffee, life is good!👍☮️

    • @Rudy97
      @Rudy97 Před měsícem +1

      do you know what "pask" means?

    • @ketas
      @ketas Před 22 dny

      here? here it means shit! : p

  • @leonardhirtle3645
    @leonardhirtle3645 Před 8 dny +1

    That wrench is one of a kind. You should be proud of it.

  • @PetesGuide
    @PetesGuide Před 24 dny +3

    11 out of 10. You inclusion of mistakes, and especially showing what they look like and how they effect the process, next steps, and the end result is the best part of the video. It is a far superior method of teaching us the details and how to make our projects better than if you just told us about the mistakes.
    And because of that your video has inspired me to go the same when I finally launch my channel.

  • @McGowanForge
    @McGowanForge Před měsícem +6

    Im a blacksmith, and Everytime you attempt a blacksmithing project it makes me smile simce i know you mainly from scrap wood and woodworking projects, its refreshing seeing something different always coming from your videos!

    • @andrewtinker7537
      @andrewtinker7537 Před měsícem +2

      I liked how his process was totally different than what a traditional blacksmith would have done, but still ended up with a nice, functional, good looking tool. I was expecting him to do a version of the draw out, split and bend method that Alex Weygers taught back in the day. It's great when you need a wrench quickly, and is my go-to, but doesn't always make the prettiest tool.

  • @voodoochild1954
    @voodoochild1954 Před měsícem +4

    “I could just buy a wrench…” Same thing I hear all the time after I make something. Nice job!!!

  • @MrChainsawAardvark
    @MrChainsawAardvark Před 27 dny +7

    I always thought that drop forging needed a house sized fifty-plus ton hydraulic press and could only be done in a major factory. So color me very impressed that you even tried to do this at home. Thank you for taking this opportunity to learn and share this with others.

  • @Roy-al-Paign
    @Roy-al-Paign Před 3 dny

    That was relaxing. I'm glad you go the extra distance and do more than is necessary for function. It scratches my brain itch.

  • @martinwardle9750
    @martinwardle9750 Před měsícem +5

    You never take the easy path. Love it.
    You remind me of my Dad. He’d try anything and as a result was excellent at loads of things.

    • @PaskMakes
      @PaskMakes  Před měsícem

      Glad you liked it Martin! :)

  • @bellendbill6227
    @bellendbill6227 Před měsícem +5

    Another great video. Every time I see a video, I can't help but wish Pask was my neighbor and I wandered over there every once in a while and helped or watched him problem solve a new process. The autodidacticism is SO appealing to me. Not being afraid to mess up to perfect a technique with the tools and skills that you have. Sometimes you learn you need new tools or skills.

    • @EitriBrokkr
      @EitriBrokkr Před měsícem

      So you could mooch off his tools and talent and interrupt his time... We all know you people

    • @bellendbill6227
      @bellendbill6227 Před měsícem

      @@EitriBrokkr hahahahaha

    • @PaskMakes
      @PaskMakes  Před měsícem +1

      Thanks very much Bill. :)

  • @mistaboombosticyt
    @mistaboombosticyt Před měsícem +2

    It's EXACTLY half the weight. 🤯 Perfection.

  • @lily_skye
    @lily_skye Před 2 hodinami

    Thank you for the explanation voiceover!! Makes this so much more fun to watch.

  • @greenlikeseafoamaaron3798

    50% of the machines used in this video were ones I had never seen before. Interesting stuff

  • @mhpjii
    @mhpjii Před měsícem +6

    Most Creative Maker on CZcams!

  • @Hiksan5
    @Hiksan5 Před měsícem +10

    Once again you take on a project that is usually considered outside the boundaries of a small hobby shop and just do it anyway. And drop forging sure is one of the more advaced techniques. Respect!
    I would love to see your take on where drop forging could be used elsewhere. And also your take on a home made sandblaster set-up would make a great video.
    Kudos for not going the overexposed 3d-printer/laser/cnc-everything route and instead insist on handwork and enjoying the process👌

    • @PaskMakes
      @PaskMakes  Před měsícem +3

      I reckon that's where making is the most enjoyable - testing and trying things out. Thank you! :)

  • @SATXbassplayer
    @SATXbassplayer Před měsícem +1

    I found this to be really entertaining. It felt as if you didn't know quite what you were doing, but were going to figure it out as you went along. So there was an added element of suspense to each step.

  • @sjsblacksmith1693
    @sjsblacksmith1693 Před měsícem +4

    Very cool project. I have been watching your videos for years, and always enjoy them. That being said... I have two comments about this video.
    - You forge like an Artist. A phrase I first used to describe Alexander Wenger, an artist who wrote a few blacksmithing books. Its a very divergent process, lots of outside the box thinking....
    - Drop forging was a process. Originally done with a "Drop Hammer". It is a "closed die" process, weither that is a single impression die struck once. Or a multi impression die struck progressively. Now this is done with hydraulic forging presses, but is still a closed die operation. A press is set up with a die set, and a run of parts are made, then any flash is cleaned up on a grinder, then heatreated, then polished.
    Then a new die set is installed, to run a different part.
    Open die power hammers, rely on the skill of the blacksmith and the tooling to make whatever you want.
    So this project is reproducing the look of a drop forged wrench, not imploying the "drop forged" technique.
    I wouldn't have said anything, but I saw in another comment that someone thought this was home shop drop forging.
    Words matter, and have very specific meaning. And I know what Pask meant, but someone else was taking away a misconception.
    Fun project. Not any of the ways I would do it. 😉 But very fun. And it looks great and works.

  • @revtmyers1
    @revtmyers1 Před měsícem +2

    To be honest, I liked the first attempt as it made it appear like an older piece passed down through the generations. Another great job.

    • @PaskMakes
      @PaskMakes  Před měsícem +1

      I did think that myself but taking a closer look it needed plating again. The scale looked pretty rough. :)

  • @justyuyun1557
    @justyuyun1557 Před 22 dny

    This is what I love about engineering, "if you don't have the tools , if no one sells it , just make it yourself" attitude. So cool .

  • @terminalpsychosis8022

    Wow surface grinder made the most beautiful spatula. Don't see vids of that much. So smoooth.
    Fun project, and it'll be so much more convenient to use. Very cool.

  • @brucemitchell5637
    @brucemitchell5637 Před měsícem +4

    Love your videos, Neil! You're never afraid to try something new that you've never done before!

    • @PaskMakes
      @PaskMakes  Před měsícem

      Glad you enjoyed it Bruce! :)

  • @redoorn
    @redoorn Před měsícem +1

    I started watching this channel when Niel was making stuff from a cutting board factory scrap. Now he is drop forging wrenches. Seems to me he looks around his shop and thinks about what he could use and then goes about learning how to make it.

  • @the_inquisitive_inquisitor

    That's one impressive workshop you've got yourself there!
    I've never seen somebody use induction heating for blacksmithing before.

  • @Vickie-Bligh
    @Vickie-Bligh Před měsícem +1

    Once again you educate and entertain us at the same time. I will never forge anything, but I find it fascinating. That was such a cool wrench and your forge welding looked spot on. I often wondered why someone would have an induction forge and a gas forge. Thank you for demonstrating why. This was fun to watch and I appreciate you bringing us along. Today really felt like I was sitting in your metal working shop with you. Thanks again, Neil.

    • @PaskMakes
      @PaskMakes  Před měsícem +1

      Yes Vickie, the induction forge is cool but it still has limitations, a regular forge is still the best option if you're only getting one. Glad you enjoyed it! :)

  • @philippboetcher9959
    @philippboetcher9959 Před měsícem +1

    Loved that induction forge, wrench looking great!

  • @billiondollardan
    @billiondollardan Před 2 dny

    This is a hell of a way to get yourself a wrench :) Well done as always!

  • @-Kreger-
    @-Kreger- Před 5 dny

    That was a lot of fun to watch. I like how methodical you are. I’m sure the video makes it look easier than it is. Either way, great job.

  • @ianvicedomini2648
    @ianvicedomini2648 Před měsícem +2

    You never fail to amaze me neil, I've been watching you for a good few years now and each time I'm left in awe. The wrench looks fabulous and does it's job well.
    Fantastic video my friend.

    • @PaskMakes
      @PaskMakes  Před měsícem +1

      Thanks very much Ian! It really was a fun project. :)

  • @threeriversforge1997
    @threeriversforge1997 Před měsícem

    Good job! It was nice to see the forge fired up. Regular vinegar is a good way to get rid of forge scale in the nooks and crannies of a piece. Just let it soak for a couple hours, then nullify the acid with some baking soda and a soapy wash. I've never done plating, but it looks fun and turns out a really nice finish!

  • @msmith2961
    @msmith2961 Před měsícem

    I used to use an industrial induction coil to seal aircraft instruments. Had never been terrified of an inanimate tool before, but having metal glow red the instant it was introduced into the coil is something else.

  • @TheUncleRuckus
    @TheUncleRuckus Před měsícem +1

    I think it turned out great Neil, it is your first foray into making a wrench after all.
    I've always said why buy something when you can make it, bc you not only save money making it yourself, but more importantly you also learn things while doing it, which is a win win in my book. 👍👍

    • @PaskMakes
      @PaskMakes  Před měsícem

      Thanks very much - for me it's all about the experimenting and learning. :)

  • @marymigliore3396
    @marymigliore3396 Před měsícem +1

    Very nice ! I always enjoy Your videos !! Hope the Family is well !! TAKE CARE !!!

  • @sgsax
    @sgsax Před měsícem +1

    Now I finally know what drop forging is. Nice little project for a useful tool. Thanks for sharing!

  • @4110mahindra
    @4110mahindra Před měsícem

    Maker is a mellinial slang word. You sir are a craftsman

  • @ironwrx
    @ironwrx Před 4 dny

    Love your videos. And love your work and tools. I definitely have envy of your induction heater, and especially your fly presses. I am a weldor/fabricator/blacksmith/sculptor and slowly training myself to be somewhat of a machinist. Your work is very inspirational. Great job. Thanks for sharing. Jon

  • @EricStrebel
    @EricStrebel Před měsícem

    Cool, nicely done!

  • @jessiemae6873
    @jessiemae6873 Před měsícem

    I don't care for adjustable wrenches. I really like your home-made, one job only wrench. I have a few wrenches and tools like that, one job only.
    And if you don't like this one, make another one. I'd be proud to take this one off your hands😉. I would have to find it a dedicated job. Which means buying another tool and that will in turn drive my wife and financial advisor both nuts. I like this idea!!
    Like you, I'm a bit long winded at times. Super video!!

  • @kamalnayan48
    @kamalnayan48 Před měsícem +1

    If I were your neighbor, I would have spent my Sundays in your workshop. Your videos are fun to watch. I could not get my hands dirty due to my physical condition, but I am a maker at heart.

    • @PaskMakes
      @PaskMakes  Před měsícem

      Glad you're enjoying the videos! :)

  • @autka_me
    @autka_me Před měsícem +2

    Great job! I must say that small mediablasting cabinet was a real gamechanger for me. Not only for rough cleaning, but polishing/satining aluminium with glass beads or surface hardening by steel balls.

    • @PaskMakes
      @PaskMakes  Před měsícem +1

      Thanks very much! I've wanted one for a few years but I need to get a better compressor first. I really do need to sort it out but there's always another tool that I purchase first. :)

  • @JahBushi
    @JahBushi Před 27 dny

    ah - so this is the famous man in a shed i've heard so much about! Great job!

  • @mikef.1000
    @mikef.1000 Před 26 dny

    Man I love all the equipment and machinery you have there -- but also the fact that you know how to use it :-)

  • @CraigHollabaugh
    @CraigHollabaugh Před měsícem

    I'm 60 and always wondered what drop forged meant since I picked up my dad's crescent wrench in the 70s. Now I know, nice outcome from a challenging project.

  • @alskjflaksjdflakjdf
    @alskjflaksjdflakjdf Před měsícem

    A sander and paint makes me the blacksmith I ain't. Beautiful work, I love it!

  • @mlangham179
    @mlangham179 Před měsícem +3

    I love the mentality and reasoning behind these little projects. Thank you for sharing your experience! Now I definitely won't be making my own wrench 😂

  • @shooterjohn7163
    @shooterjohn7163 Před 21 dnem

    Amazing things that were accomplished before our time. If I can ever find someone that can do block work like that I have evil lair I need built.

  • @user-ml3yf7pg7g
    @user-ml3yf7pg7g Před 24 dny

    Wow, true craftsmanship and a lot of patience 💫

  • @TheFacilitiesOfficer
    @TheFacilitiesOfficer Před 28 dny

    I really enjoyed the making of the spanner, amazing how many different processes were used, I think it came out brilliantly.

  • @axemeagain2554
    @axemeagain2554 Před 25 dny

    Awesome! Keep learning! Had fun watching this process!

  • @GreenDayFanMT
    @GreenDayFanMT Před měsícem

    What a delightful project and result. Thank you for sharing it with us.

  • @tayred81
    @tayred81 Před měsícem

    I'm impressed by others that trust the process and get it done. Good job

  • @mathsangler
    @mathsangler Před měsícem

    Thanks, Neil. Loving the adventure spirit and the perseverance you show in all of your projects. A great inspiration!

  • @robertmceuen3630
    @robertmceuen3630 Před měsícem

    Excellent! Beautiful little project wrench. Lifetime and beyond item.

  • @darrylbrook5968
    @darrylbrook5968 Před měsícem

    As usual Neil, the video has items in it that a lot may have not seen, great job mate...

  • @NicoSmets
    @NicoSmets Před měsícem

    What a fascinating setup you have. Thank you for sharing

  • @cheryldawkins7486
    @cheryldawkins7486 Před měsícem

    I really enjoy your channel. I love how you try making things just to learn and you show us your journey. Thank you!

  • @rogerdale5451
    @rogerdale5451 Před měsícem +8

    You are something else... Wow. What? This coil thing- I've never seen such a thing, and there you are holding the piece with your bare hands. You're a genius.

    • @zoxe.
      @zoxe. Před měsícem +1

      Induction forges are cool, but keep in mind they only work for electromagnetic metals (i.e. no aluminum, brass, etc.).

    • @PaskMakes
      @PaskMakes  Před měsícem

      Thanks Roger - the induction forge really is an amazing machine. :)

    • @JoshWright396
      @JoshWright396 Před měsícem

      @@zoxe. you can definitely use induction heating for aluminum (it’s one of the more common ways of heating aluminum in industrial processes). The metal does not need to be ferromagnetic (I assume that’s what you meant instead of electromagnetic?). Any metal that conducts electricity (which is more or less all of them, with only a handful of reasonably exotic exceptions) will work.

  • @54mgtf22
    @54mgtf22 Před měsícem

    Always interesting. Thank you, Neil 👍

  • @Goalsplus
    @Goalsplus Před měsícem

    Excellent work. Thanks for sharing your techniques and work ethic.

  • @lancemillward2462
    @lancemillward2462 Před 16 dny

    looks awesome. hand made always more enjoyable than store bought

  • @tonio172
    @tonio172 Před měsícem

    You're such an impressive maker, a true inspiration.

  • @SeanFoushee
    @SeanFoushee Před měsícem

    It's amazing how versatile that fly press is in the shop. It's definitely something I want to get in the future.

  • @andrebartels1690
    @andrebartels1690 Před měsícem

    Wow, very nice work. That's a tool to be proud of and to pass down generations.

  • @DigitalGus75
    @DigitalGus75 Před měsícem

    Amazing Pask! I love your experiments. Always a technique or trick I have never seen before. Thanks mate!

  • @c.a.g.1977
    @c.a.g.1977 Před měsícem +1

    Next week, join us when Neil makes an entire set of wrenches, in imperial and metric!
    Awesome video, you are so skilled!

    • @PaskMakes
      @PaskMakes  Před měsícem +2

      I don't think there'll be any more wrenches for a while. Glad you enjoyed it! :)

    • @c.a.g.1977
      @c.a.g.1977 Před měsícem +1

      @@PaskMakes you are one of the few channels I literally watch every video of. Whatever you do is educational and entertaining. You are a true inspiration!

  • @kashifkhan3040
    @kashifkhan3040 Před měsícem

    nice job extending the limits of DIY

  • @robschaffer2189
    @robschaffer2189 Před měsícem

    This is fantastic! I made a fan clutch wrench that I use frequently. I think I need to forge the handle now! Great tips, thank you.

  • @ReasonablySkeptic
    @ReasonablySkeptic Před měsícem

    THAT WAS GREAT! Thanks for the video.

  • @bobbyjackson4452
    @bobbyjackson4452 Před měsícem

    Awesome. Thanks for another great demonstration.

  • @figrollin
    @figrollin Před měsícem

    that induction forge is the coolest thing I've ever seen.

  • @jimmylovesbikes
    @jimmylovesbikes Před měsícem

    I get such a great feeling using tools that I made myself. Your 40mm wrench is on the next level. Wow

  • @MachiningandMicrowaves
    @MachiningandMicrowaves Před měsícem

    I've made a few simple tools over the years that give me simple joy when I use them. The witness marks and minor imperfections are part of their character, and I remember the time spent in the shop just making something useful for myself. Of course I could just have bought a Thing, but where's the fun in that? Lovely video.

  • @johnquijote7194
    @johnquijote7194 Před měsícem

    Always a fun journey!

  • @johnsrabe
    @johnsrabe Před měsícem

    As always, thanks for the great vid and the transparency!

  • @chaserwilliams1
    @chaserwilliams1 Před měsícem

    Absolutely amazing!

  • @homemadetools
    @homemadetools Před měsícem

    Excellent attention to details. We shared this video on our homemade tool forum last week 😎

  • @DavoShed
    @DavoShed Před měsícem

    Great video. I love the induction heating thing!
    I also love the fly press. I never thought of using one for forging. Worked better than I was expecting.
    Nice workshop in general. I need more tools 🤠

  • @Neil-Hanson67
    @Neil-Hanson67 Před měsícem

    You never fail to amaze me my friend, what a talent you have, thank you for making my Sunday a better one.

  • @andrewtinker7537
    @andrewtinker7537 Před měsícem +1

    A dip in a strong acid like hydrochloric or sulfuric is also really good at getting scale off before plating. At least here in the US, you can get hydrochloric acid at hardware stores labelled as pool acid, concrete cleaner, or muriatic acid, and you can get sulfuric acid at the supermarket as a drain clog cleaner. The sandblaster works well too, but leaves a pitted surface that's going to need a lot of cleaning and polishing before it plates up shiny.

    • @PaskMakes
      @PaskMakes  Před měsícem

      I've used it to strip galv before and it does that amazingly well. I'll try it next time on scale. Thanks. :)

  • @RobMods
    @RobMods Před měsícem

    Great project. Great video as always!

  • @marcmmclellan
    @marcmmclellan Před měsícem +1

    Very cool! You always take experimentation to the next level!

  • @bruinflight1
    @bruinflight1 Před měsícem +1

    you, sir, are FEARLESS!
    love it!!!

  • @KIMI967
    @KIMI967 Před měsícem

    Wonderful, as always!

  • @CreaseysWorkshop
    @CreaseysWorkshop Před měsícem

    Brilliant work. Super enjoyable.

  • @alanbragg9466
    @alanbragg9466 Před měsícem

    absolutely amazing. it is always a pleasure watching you create.

  • @andrewdolinskiatcarpathian
    @andrewdolinskiatcarpathian Před měsícem

    Such a great idea. Expertly executed. 👏👏👍😀

  • @popefang
    @popefang Před měsícem

    Just bloody inspirational!

  • @MrSim0n
    @MrSim0n Před měsícem

    another enjoyable video thank you Neil

  • @wileycoyotesr8623
    @wileycoyotesr8623 Před měsícem

    I would have been disappointed had you made the finish appear store bought. I try to personalize my projects with hints of imperfection to identify them as hand made. You did very well. 👍

  • @BK_blacksmith
    @BK_blacksmith Před měsícem

    I've really enjoyed this project. Thanks for taking the time to video it

  • @stevehogg
    @stevehogg Před měsícem

    As usual, another informative and entertaining presentation of your art!

  • @FunctionalPrintFriday
    @FunctionalPrintFriday Před měsícem

    great work as always

  • @Neptune730
    @Neptune730 Před měsícem

    Considering how that was done. It turned out really good. I would definitely take it if I were given something like that. Job well done.

  • @bendavanza
    @bendavanza Před měsícem

    Fantastic. Really. Your videos never disappoint, you have a great way of putting the viewer right along side you through the project. Drop forging these details! Wow

  • @markgordon4368
    @markgordon4368 Před měsícem

    Found the plating tip very useful 😊