How to assemble a peltier cooler kit at home | peltier module | Thermo electric cooler kit assembly
Vložit
- čas přidán 31. 05. 2024
- #unboxing peltier #thermoelectric module assembly #peltier kit assembly
🔸(Available now for best prices)
✅Buy peltier module here: amzn.to/311STA9
✅Buy full kit here: amzn.to/3rbEAEu
Do you love Bird photography them check this out : / @knp001
Thanks for visiting
Hey What's up guys, how are you all this is ram and you are watching infinity explorer, In todays episode of infinity explorer, we are going to unbox a peltier or thermoelectric peltier cooler kit and i will share you the details of assembling it with detailed steps and test it extensively to obtain best results possible, in the process i achieved -12 degrees celcius its a very good number compared to other results and you can assemble your own peltier kit and test it in no time, so watch the video till the end and enjoy
Thanks for watching
Link to ice making using peltier: • Portable ice maker at ...
Link to make your own mini fridge: (uploaded soon)
Link to make your own mini AC: (uploaded soon)
Link to buy peltier kit: cutt.ly/ok0bDvK (robu.in)
✅electronics comp website
www.electronicscomp.com/therm...
✅Lets connect:
Instagram : ram_the_inf...
Linkedin : / ramakrishna-gudivada-4...
🔴WATCH MY OTHER POPULAR VIDEOS :
Turn old negatives into digital photos:
• Convert old negatives ...
DIY smoke bomb: • Life saving smoke flar...
Rocket fuel Vs Popcorn crazy experiment :
• Rocket fuel Vs Popcorn
Petrol Vs Thermocol (Must Watch):
• PETROL + THERMOCOL : S...
Burning money Magic trick:
• Burning money magic trick
DIY 3D Dragon :
• I made a 3D T-Rex with...
Balancing Nails trick:
• How to balance NINE na...
Track: Jarico - Island [NCS BEST OF]
Provided By: Magic Records: czcams.com/channels/p6_.html...
🔸🔸𝗚𝗲𝗮𝗿 𝗜 𝘂𝘀𝗲
🔸Mobile:amzn.to/3ingP79 (Main camera)
🔸Mic: amzn.to/3uBa4Uf
🔸Tripod:amzn.to/3l3jiVV
🔸Gorillapod:amzn.to/3uDrAXJ
🔸laptop:amzn.to/2YgpbX6
🔸Keyboard & mouse: amzn.to/3l1QM76
🔸Earphones:amzn.to/3l1QRrq
0:00 Introduction
1:00 COTTON WASHER
1:26 BEST BUY LINKS IN THE DESCRIPTION
2:09 THERMAL GREASE
2:32 COLD SIDE IS ON TOP WITH LETTERING
2:44 ATTACH HEAT SINK AND WOBBLE IT
3:27 12V DC CPU COOLING FAN
3:52 SAFETY GRILL
4:25 12V BATTERIES CONNECTED IN PARALLEL
4:54 TEMPERATURE STARTED TO DROP
5:12 FORMATION OF MOISTURE
5:42 HEAT SINK ON COLD SIDE DISSIPATES COOLNESS
7:00 FULL VIDEO LINKS IN THE DESCRIPTION - Věda a technologie
Liked your explanation.. all the best. Keep making
Thanku very much brother...keep supporting🤗
I loved your video. I was looking for it.
Thanks you found it
Great one buddy nice one 👍 love to see more of it
Thank you so much iam glad you liked it, check out my other videos as well in my channel...you will love it
thank you for speaking English. like and subscribed
Iam glad you got all the points clearly 🤠
Great video ! Keep it up
Thanks a lot...more on the way
Hey i wanna make a freezer that can freeze water. Is one peltier enough or should i use 2 to 3.
But power supply to these modules should be seperate as well it's hard to provide that much power through one single source, the more the peltiers the better the cooling, power consumption is also more
Thank you for informative video. I plan on powering the kit off a 12VDC 9A motorcycle battery (only when motorcycle is in operation) -- for use as he lmet cool er! (electronics noob!)
Q1. What effect will this have on battery life?
Q2. What gauge AWG wire should I use?
Q3. Is it OK if I run two (+ve and -ve) wires from battery to kit -- and connect Peltier + 2 fans (on both sinks) + Thermostat to these two wires, closer to helmet?
Thanks again.
You may contact on this number 7095689130
@@infinityexplorerram Its OK. I'll seek elsewhere.
@@tz-uc9jf have u succeeded in helmet cooling? What's ur CZcams channel name? I want to watch it working
It's very Useful 👍
Thanks Girish
When we use cpu fan to cool the heat sink, do we need to blow outside air into the heat sink or do we need to suck the air from the heat sink? Which will give good result pls clarify
Hey hi good question, by the kit they provided the wind is blowing on to the heat sink but anyways the setup works, either blowing out from the heatsink or towards it , the air is passing front the gaps, so not a problem use can use both
Are batteries in parallel better than series. Series will give more voltage. Are amps more important than volts.
Yes amps are more important than volts in this case, it draws nearly 6amps that's a lot of power and make sure the voltage don't cross 12v as I used 12v module, if you have higher capacity module use it
Hello sir, may i ask what did you use to convert the DCV to ACV ? We're having a bad time as its our project and we dont know how to convert DCV to ACV.
Hey hi buddy I didn't converted DC to AC I just used dc current to power it, and it works if you really wanted to convert dc to AC there are a lot of solutions online you can check thanku
Hey super. I need some help to add this module in an Artic air cooler to make an air conditioner type cooler
Yeah you can do that,but remember it's not for industrial usage as it won't give that much of cooling when thinking of a room sized option, but I made some projects with this peltier module do check it out, videos will be in my channel.
@@infinityexplorerram no cooling at all
It depends on the type of peltier module and amount of current you are giving, it worked fine for me and I shwn you the proof as well, it's good for portable hand sized coolers
Any type thermal paste can use to stick a peltier to heatsink?
thermal paste is specifically designed to transfer heat faster, better use that one provided with the kit or you can some online
Can I used 12v 10amp 120w dc power supply in that Thermoelectric module?
Actually it depends on the type of peltier module, mine is rated for 12v 6amps but in the market high capacity peltier modules are also available, check it once online for specified models you will get it, thanks for asking.
If I use DC pump on same battery 12V -6A will it burn pump which requires 0.5-0.6 A.
The power draw will be more, i dont recommend it but in hard cases you can do that
Hello sir i had a query i have a school project of making thermoelectric generator and i saw some videos where they used this kit can i use it for the same ? And can i provide it heat from below and the fan will cool it down from the other side ? And then do i have to connect the fan with the peltier module or what ?
The setup for thermo electric generation is a bit different, you don't need heat sink for cold side and all just just place a metal place on the hot side and heat it and put ice on cold side and it's done simple I made a similar vidoe as well you can check in the channel somewhere around these videos
@@infinityexplorerram can I use that fan on the cold side rather than ice because I have to show it working in the school and I can't get ice in my school
No the more temperature difference it has the better electricity it will generate, take ice in a thermos flask and use it
How many Peltier sets were used to build a fridge show in the end and what was the lowest temperature achieved in what time as it is my final year project please reply asap..
Hey hi....if you use two peltier modules it gives faster cooling for that small chamber, i was able to achieve that minus temperatures at the surface, you can't get the same temperature through out the chamber, but can chill the water, give it a try✌️
How did you connect thermocol freeze model with peltier model?🤔
seal the cold end to the thermocol box I made that video, you can check it on my channel
Very good
Thank you so much
Superb (real engineer)
Thanku🤩
The peltier heat side install the heat sink. How many degree hot heat sink
It's getting too hot...never tried to measure, but its too hot may be 100 degrees plus or even hotter
My 12706 going max to max 11-13 degree. How can i improve this..
Yea, try making the peltier module isolated by insulating with thermocol or other foam material, place the thermometer on top of peltier for accurate results
Suggest me best peltier for water generation through fan & heat sink...
Atleast 1glass of water/hour...
For my atmospheric water generator project..!!🙏🙏
its unrealistic to generate 1glass per hour with small scale projects it depends on multiple aspects like atmosphere humidity and all other stuff give it a try try searching on youtube about this, hope you find some
Bro can i use 12v 8 amps 100w power supply for a single peltier module
it completely depends on the model of peltier you are using, i used 6amp model so it can operate maximum on 6amp 12v, there are other peltier modules available which can go even higher.
I really like your video, can you tell me from which online website did you buy your products. Thank you.
Your most welcome, I usually order all electronic items from robu.in or electro comp.in but complete kit of thermo electric peltier is only available in few websites like robu.in and you have to buy the peltier module separately.
@@infinityexplorerram thank you, I went on robu.in but there is no stock, its ok for now, I already ordered for all the components from Amazon, costs are very high, but cant help it. Will buy from Robu next time.
Bro...check the description for links for electronic comp..stocks are available..at cheap prices currently at 410+80 gst it's a very good site but delivery takes more than a week, save yourself some money
Big fan bro ❤️
😇🤩
Hello sir, can i use this project to cool the aquarium tank?
It depends on the size, if it's small tank of nearly 10-15 lites you can use with a thermostat so you can regulate temperature, but any meats why do you want to cool aquarium
What if we use 12 v and 25 amp current.
And use 3 peltier modules
It depends on how you connect them check for datasheets of available, i don't think they can handle that much current, of you connect them parallelly current divides for sure but individual capacity is of 6amps for 1206 peltier module, didn't tested it outside that amperes, give it a try if you have and 25amps is a lot of power
25 amper jön 600w xd majdnem 25 amper jön egy konektorból uram butaságot ne írjál az történi hogy túl terheled a 6,5 amper még elbírja de a legjobb ha 12 v 5,8 amper akkor a cellád még nálad is továb fog élni :)
if you lay the fan down on a surface, the fan cannot suck air. For better heat transport you have to put it upright
Thanks for you suggestion, keep watching infinity explorer, The grill at the bottom is giving enough space for the fan to dissipate the heat from the peltier, sending out air gives you better efficiency than sucking air into thanks
what is the size of the battery needed if I want to run the module for 4 hours straight?
If you want to run that long use smps, batteries won't last much i used 12v 1.3apm hr battery that lasted around 10-12 min, you can use bigger battery of 20amp hr or something
Will the fan on the cold side of peltier suck air or blow air to the peltier
It blows air it has to to directed to us in order to provide cool air , unlike hot air which is surrounded the fan has to suck air from peltier and push it towards our face
@@infinityexplorerram Thank You so much .I am making a mini fridge for which I need your superb guidelines.
I tried once but the peltier was overheated and soon after was damaged
To prevent peltier from overheating you must install a a heat sink and install a a fan, make sure you use thermal paste for better transfer of heat to heat sink
Carry on, it will work with well insulated cabin and good heat sink for hot side
👌👌👍👍
Is DIY/kit ko mai Auto mai air ke liye use karsakta hu 12v battery se
you can use but it s not going to be the best option, i made a small cooler with peltier module, video will be releasing soon, you can watch that. but for auto its not good , i wont give that much coolness
Bhai mera model me cooling nhi ho rhi he kya kru assemble jese apne kiya hee mene bhi vese hi kiya he
Bhai ek bar check karlo...the lettering side is the cooling side and the other side is the hotter side, don't connect to battery to peltier module without heatsink, if you do so it will damage the peltier module, and make sure your battery(12volts) Is fully charged, it consumes a lot of power, connect red wire to positive and black to negative After these checks if it is not working it may be damaged.
Mene 12v2 am ke power supply se connect kiya he jo sink he vo to cool ho rhi he lekin box nhi cool ho raha he
Achaa...peltier module tho work ho rahi hai....box ta matlab....Kitna bada box...it takes a lot of time brother...of you watched my video on how to instant ice maker in my channel it took me around 1hr to freeze 1 small glass of coke. Better make a small insulation chamber, if you any other queries reach me out through Instagram, happy to help you.
Make a cold water dispenser using this for summer
Nice idea brother, will try
Love from India
Love from infinity explorer
Good Morning Sir . Sir I am getting confused with assymbling peltier. I can't understand which way the air flows in the hot side heat sink .Does the fan blow into the heat sink or sucks from it .Please clear this problem .I am damaging many peltier modules .
It blows towards heat sink and no worries it won't damage your peltier
@@infinityexplorerram Thank you so much dear
@@infinityexplorerram Purchased peltier kit fom Robu .Online shopping .Completed the fridge .After how long will a glss of water cool down . I found nothing in one hour . Is small fan on the cold side is nessary .
@@infinityexplorerram The light inside is continuously glowing .Can this slow down cooling
No need of fan of you have fan it will diversify the cooling, better keep it directly on top of peltier for best results
You should give the fan some space to throw the hot air
that space is enough for this small one
Hello sir, where is the object to cool? How can we assemble it to the system?
You can connect that cold side to anything you want like a mini heat sink or water block etc etc
Bhai agar 12v2 amp power denge to cooling hoga ya nhi
Haa...hoga, the peltier module is rated for 6amps but you can give 2apms also, but the cooling speed will be slow when compared to 6 amps, more the amps more faster the cooling
👍
🥳😇
How much amper required for this module which you using
6amps 12 volts
1) Does 6 Amp safe to use?
2) How to generate 5-6 Amp using DC adaptor?
Yes and yes yo can use, there are smps available 12v 6 amps ka vo use kar sakthe hain
Cooling fan exhaust air or take air?
Thanks for asking...the main purpose here is to take out the heat from the hot heatsink so it can cool the other side much faster..simply it exhausts air
@@infinityexplorerram thanks alot for your prompt reply 👍🏼
Thanku so much for visiting, have a happy and creative day
Can we reverse tha process of peltier effect?
Yes...I made a video, seebeck effect go watch it in the channel with name free energy or something, thanks for asking.
Bro can v use it on amplifiers
Is your idea to cool the amplifiers, i font recommend that, because the hot produces even more heat and that is not ideal, so try using a fan or water cooling technology (other alternatives) for economic and best performance, hope this helps
Gjb
thanks
The fan was in the opposite direction
Yeah, whatever the direction is, it should maintain the air flow from the hot side heat sink and its doing pretty good
Second law of thermodynamics I think so
Well...I too don't know what I know is this works on Seebeck effect
I used the same peltier by applying 5 amps but I was so impatient with it that I ended up burning it 😅😂
Oh my god, plz save this kid
12 wat charge work thise coile
Watt is the product of volt and ampere(current). 12 watt is very small for peltier, i recommend using 12v and min of 2 amp for better cooling thats around 24 watt, plan accordingly
@@infinityexplorerram sare pleae share any online charger chargere i am buy
amzn.to/3yM0HUR this is enough
@@infinityexplorerram very very thanx🥲
let me know if you need any help
Sir I ask the wire how
Thank you 😊
Didn't understand your question brother
May be he is asking about wiring 🤔
He is asking how to do wiring
Ooh that's fine its simple red wire to positive and black wire to negative, never connect on opposite direction, it may damage small electronics, connect the fan in the same way in parallel connection just follow the video mate,it will be fine.
Awesome.. how much watts run ?
I used 12v and it draws 6amps of power so 12x6= 72 watts nearly for this specific model
Lekin bhai maine bhi aaj ye yhi same kit lia 12710 peltier lgaya mein heat sink jyada garam kyu hoti hai
Thanks for asking, actually I used 12706 and you used 12710 it's more efficient and draws more power so heats up quickly, better use heatsink on the hotter side with a CPU fan attached or dip the portion of heatsink In a bowl of water
@@infinityexplorerram bhai mere taraf se ek experiment kro stack peltier ka jisne 2 peltier series me use liye jate hai dhyan. Rakhna lekin hottor side se bda rakhna aur uske opper km ampere ka rakhna. Jb video bn jaye to link dena email pr
mmohit1849@gmail.com
Iam not sure I am going to make the video soon but, are you asking me about stacking a peltier module to another peltier module so one module cools the other side....interning let me give it a shot, you can connect me through Instagram.
Kit kitho mildi h patiala Punjab m
yep it's available online and some offline stores
you choking the hotsite fan, it can be more cooler!
May be, but the ventilation is enough to cool the heat sink
How Mach price????
It's around 200 rupees ( only peltier module), and for the kit it's 450 rupees, I bought it online and prefer buying the heatsinks offline for cheaper price
Kitna watt consume karta hai ?
Its based in the model you use...Iam using 6A model which consumes less power than 12A model, didn't calculated exactly on how much it will consume...but it draws a lot of power, battery drains easily
Where is the small fan
You may not require it, as the coolness will dissipate at a normal rate and that's not going to be a big problem, but on the hot side you must use a big fan otherwise the module will burn out.
@@infinityexplorerram oh i get it also is 12v 2a safe 2 run the kit
It's fine if it won't exceed 6A
ur link doesnt work
Can I know your region, Iam from India, some links only works within the region
Address of shop at Kolkata
Actually I bought it online and you can check your offline stores as well, online links are provided in the description
Thermo electric pilter
Yes
Piltar kit praise Kitana ,
It depends on your region, in india it's available for around 200rs
A WELL DOCUMENTED VIDEO gets downfall due to audio
Thanks for your suggstion brother, i will look into it
This video rustled my jimmies
Thanks for the feedback❤️
Pelntier model ko supply dene ke bad kuchh time bad hit ho raha hai Aisa kyon
This is a common thing for peltier, one side will be heated and one side will get cold , you need to make sure you are using a heat sink and fan to dissipate heat from the module(hotside) and make sure you don't exceed 6A of current, hope this helps, thanks.
Make a ac
Thanks for the suggestion...will make it
Fan ulta lagaya hai bro 💀
Fan ko grill ek hi taraf acche se fix hota hai..mei vaisa hi kiya, ulta or seedha kuch difference nahi hotha chota fan keliye..bas air kichna aur fekhna
First at comments
Yes Yes!....thanks for your support
Jhut hai 1 mint Mai baraf Nahi jamta hai Mera 390 rs bekar hogaya jhut hai
Ha bhai battery capacity mein depend karta hai....plz follow the video carefully, you can see the timer and all...my model Is te12706 and I used 6amp battery. If you can provide a lot of power below rated voltage it works...even in just seconds of connecting you can feel the coolness just give it a try once all the best.