Thank you for putting this out, super interesting set up. Excited to see what your split snake ends up being. Also had no idea you could run guitars like that! Makes it even easier.
We have ran vocals through there in the past for vocal effect automation, but we had some gain issues. So we are going to start only using the fx on the x32. No latency issues though. Lower the sample rate and make sure you have a fast computer
I had pretty good luck automating vocal FX in ableton by running the FX completely wet out of their own channel. That way if there's a bit of latency on the delay/reverb its not noticeable, but it does take an extra channel up. So like you have a dry vocal on 1 channel, and the 100 percent wet FX on another channel and you can blend them together.
In the past we have done both with drums; brought our own mics and looped them through our system and then to FOH and also received a line from the stage box to send drums to our drummer. You can go either way. We send guitars to FOH through designated outputs from the X32. The only thing coming from LR are the backing tracks. Hope this helps!
No latency issues here! Just make sure the sample rate is low. We tend to use Gojira by neural DSP the most. Just recently started using GGD oversized cabs for IR. Hope this helps!
What? No sweatpants rundown? So you’re running out of the rack mixer (not an interface) into Q base for processing, and then back out to the rack mixer then to ears? Sounds like a latency nightmare.
TJ MAXX baby! The x32 has a built in interface to connect to cubase. It all hits Cubase and then is routed to outputs on the X32 to send to ears and FOH. We haven’t had latency issues. We lower the sample rate to adjust for that. Hope this helps!
Thank you for putting this out, super interesting set up. Excited to see what your split snake ends up being. Also had no idea you could run guitars like that! Makes it even easier.
Thanks for checking it out! Glad it did something for you 😁
@@levelsbandfollow up question. Do you have a separate antenna combiners for the IEMs and guitars or are they going through one?
🤘🤘
Yo nice setup
Thanks man!
Literally one of the most confusing things I’ve ever listened to 😂
It’s one of the most confusing things I’ve ever done IRL 😆
That’s sick!!!!
@@zachgarrett983thanks man! Glad you dig it
Looks clean! Do you also run the vocals through cubase? Any issues with latency?
I can almost guarantee it. Lol
We have ran vocals through there in the past for vocal effect automation, but we had some gain issues. So we are going to start only using the fx on the x32. No latency issues though. Lower the sample rate and make sure you have a fast computer
I had pretty good luck automating vocal FX in ableton by running the FX completely wet out of their own channel. That way if there's a bit of latency on the delay/reverb its not noticeable, but it does take an extra channel up. So like you have a dry vocal on 1 channel, and the 100 percent wet FX on another channel and you can blend them together.
how do you get drums to IEM? getting them from venue stagebox or using your own mics or you travel with your own drumkit and mics?
In the past we have done both with drums; brought our own mics and looped them through our system and then to FOH and also received a line from the stage box to send drums to our drummer. You can go either way. We send guitars to FOH through designated outputs from the X32. The only thing coming from LR are the backing tracks. Hope this helps!
Hi guys….where is snakes?
what guitar plugins and irs are you using if you can share? any latency problems?
No latency issues here! Just make sure the sample rate is low. We tend to use Gojira by neural DSP the most. Just recently started using GGD oversized cabs for IR. Hope this helps!
What? No sweatpants rundown? So you’re running out of the rack mixer (not an interface) into Q base for processing, and then back out to the rack mixer then to ears? Sounds like a latency nightmare.
TJ MAXX baby! The x32 has a built in interface to connect to cubase. It all hits Cubase and then is routed to outputs on the X32 to send to ears and FOH. We haven’t had latency issues. We lower the sample rate to adjust for that. Hope this helps!
What computer are y’all using to run everything through?
We are running a MacBook Air with an m2 chip
@@levelsband what made yall get the air instead of the pro?
@@thankyou9064 Mainly price point. There wasn't anything that we needed from the pro that the air didn't have.
@@levelsband as far as plugins, what’re using? Neural dsp, pod farm, jst?
@@thankyou9064 I’m also also curious what processing you’re using through Q base and sending back to the mixer.