This helped me fix my Razer Taipan! I had already taken it apart 3 times and tried putting a bit of tape on the top of the clicker to make it press deeper but that wouldn't work. Adjusting the spring has fixed it perfectly and the click feels as deep as it was originally. Thanks!
okay, not showing the part where you actually remove the cover is not cool. if you ever re-record this video or update it, just make sure you do that, and if you forget, then just go back and fix it. if it's a part where people need to be careful while doing it, bc otherwise they might damage or lose pieces, then its maybe, just maybe, a good idea to actually show how to do it well
thanks alot you just saved me alot of money. every video suggest replacing the switch box which needs soldering youre the only one who opened it and fixed the actual box.
I have been using G300s for 8 years. I'm on my second one for my desktop and I have one on my laptop. Great mouse. I did this fix years ago and remember it being a chore. I decided to look for videos to see if there were some tips before I tried to do it again. I was pleased to see that one of the first videos that popped up had my same mouse. Your description about reinstalling the copper part really helped. Flat end under the hook first and then the loop end slides in sideways under the hook at the other side. Very easy. Saved me a bunch of time, learned how the piece flexes to make the mouse click, and picked up a new skill. Thank you.
I was able to use a tweezers to bend the metal clip up without taking it off. Fixed my Zowie FK1 mouse in just five minutes. Works perfect, other than needing replacement rubber sliders lol.
Might try this sometime this week, my mouse recently double right clicks on 1 singular click, otherwise going to replace it, so nothing to lose with trying this.
I'm so thankful a guide like this exists! Unfortunately, when I took off the cap for the switch, the button flew off on both and I couldn't find them cause they're so small, so be careful. Luckily I had a spare mouse to take them from, so yeah!
Thank you so much man, I got a Glorious model o and its left mouse button was clicking if I put to much pressure now when i click it doesnt happend anymore I thought of buying another one but I tried to fix it first and I ended up not buying another model o You earned a sub
Great video. Unfortunately, the mouse I tried to fix, Logitec G602, has much smaller springs and it was futile. So, I reprogrammed the buttons so the Right Click Button is now the Left Click Function and one of the side buttons controls the Right Click Function. It's not too bad. I'll get used to it. Thanks for the excellent video and the written description. BC
dude, use AutoHotkey to run this script and the double clicking will be gone : LButton:: If (A_TimeSincePriorHotkey < 150) ;hyperclick Return Click Down KeyWait, LButton Click Up Return
If you are a minecraft bedwars geek, you would like hes mice. Considering bedwars player use double clicking mouse to click faster. Someone mouse use it as a feature by settnig the debounce to 0. this mouse is good, but id rather use adjustable debounce time mices.
me who fixed this issue same way, didn't know it's called double click, I called it too sensitive switch. was looking for people having issue with mice after 6 months of usage.
I gave up trying to take the cover off after trying multiple times, so I just stuck a piece of tape over the switch and called it good lol. At least it works now
Oh.... so you're telling me i went on a manic episode completely destroying my mouse for nothing? "it is literally thorn to pieces every part of it out of anger"
Thanks for postingthis online, I already fixed my mouse as per your instruction but one thing I noticed about my mouse is the switch I think placed in a wrong way for mine in the mouse factory I mean... The white button of the switch is on the left side of the switch box but its curve is on the right side.. Is there something wrong with that?
i fixed it without disassembly by pressing the left and right click buttons hard, but not too hard until it breaks for 10 seconds, blowing through the holes on the mouse where the click buttons are and shaking rapidly, repeating until it works. my mouse was double clicking 50% of the time and now it only double clicks once out of every 100 clicks, thanks reddit
You can just open the side button or any slightly used one and just change the spring and you dont need to do the bending stuff "wich is working but dont last long and feels shit".
Thanks. I was emboldened to dismantle my mouse ans fix it with 5x eyeglasses{when you are over 40}, spit{or masking tape to hold the button in place{, screwdriver, needle and tweezers.
BEFORE YOU START what's not mentioned is that each of these micro switches are constructed differently, and many rely on precise placement by machine. If you are here watching this video to fix your mouse you are FAR BETTER OFF learning to solder or replacing the mouse, your likelihood of success is low.
lol RIP to my G602, time to buy a new one. i tried, the little copper piece is soooo thin like paper, its done. well, it lasted longer than expected. got it in summer of 2019, so well worth it i guess. thanks for the video.
Open an old mouse, open the microswitch recctangular box, take out the wierd shaped metal thingy, stick it in your broken mouse, no soldering required. If you don't have an old mouse, order a microswitch for a couple dollars and take that metal thingy out.
Can you make a tutorial that helps with the mouse, because i've changed the mouse 2 times and it's still double clicking, can u fix it with the laptop?
Bought Razer Trinity.. after 3 weeks it start clicking double.. i tried to click from different angles, and make myself so uncomfy doing it.. but now no matter from which angle i press it it does the same.. I really can't believe it.. Having friend his start doing that after 3 years lol.. i am just unlucky i guess
pro tip: fuck this noise, today i had a Q tip on my desk and decided to rip a bit of cotton off and stick it in front portion of the left click next to the scroll wheel. problem fucking solved.
DO NOT ATTEMPT THIS, you will just break that tiny spring and then you will have to buy new mouse eventually. because this dumb@ss didn't show the most crucial part, which is how to remove that spring mechanism because once it's bended at those side tiny bars it's not going to work no matter what you do. luckily i had an old non working mouse which i directly unsoldered the connection and used that on my current mouse... and it's safe. just go buy those tactile buttons from electric hardware shops and solder it instead of trying to fix the spring because it works if you know how to remove that spring carefully.
After I'd reassembled my mouse I clicked the like-button, but it instantly unliked it. So since the tutorial didn't work I clicked the dislike button, and again it instantly undisliked the video!
Honestly, all that double clicking is a sign that your mice needs to be retired. It served you for a long time, let the little guy rest and buy a new already.
Did this help you fix your mouse? What mouse are you rocking?
if you asked me zebronics mouse
@@tanishkprem7422 Haven't seen them before, they do seem to have some interesting peripherals
@@PearCrew it's an indian brand
no, it didn't help very much. my mouse is MIXIE
DONT DO THIS YOU CAN JUST ADJUST THE DEBOUNCE TIME AND TURN THE DEBOUNCE TIME TO THE MAX AND NOT ON 0 OR IT DOUBLE CLICK
i do everything you said step by step with care. now im using my new bought mouse
hahah :/
This helped me fix my Razer Taipan! I had already taken it apart 3 times and tried putting a bit of tape on the top of the clicker to make it press deeper but that wouldn't work. Adjusting the spring has fixed it perfectly and the click feels as deep as it was originally. Thanks!
okay, not showing the part where you actually remove the cover is not cool. if you ever re-record this video or update it, just make sure you do that, and if you forget, then just go back and fix it. if it's a part where people need to be careful while doing it, bc otherwise they might damage or lose pieces, then its maybe, just maybe, a good idea to actually show how to do it well
Does it have any trick to be removed? im strugling
pro tip: for faster fixing trow your mouse very hard at the wall
OMG OMG THANK YOU YOUR A LIFE SAVER
bruh thanks it acc worked
bro, it worked
it actually worked
Funny tips but working
thanks alot you just saved me alot of money. every video suggest replacing the switch box which needs soldering youre the only one who opened it and fixed the actual box.
Thank you man my mouse is working perfectly now 🎉❤
I have been using G300s for 8 years. I'm on my second one for my desktop and I have one on my laptop. Great mouse. I did this fix years ago and remember it being a chore. I decided to look for videos to see if there were some tips before I tried to do it again. I was pleased to see that one of the first videos that popped up had my same mouse. Your description about reinstalling the copper part really helped. Flat end under the hook first and then the loop end slides in sideways under the hook at the other side. Very easy. Saved me a bunch of time, learned how the piece flexes to make the mouse click, and picked up a new skill. Thank you.
I also love G300!
Pro - it's working.
Con - the button doesn't feel the same.
But at the end of the day I get to use my favorite mouse again so thumbs up.
its a good tip if you dont want to change your mouse early, however, the button feeling will never be the same.
I was able to use a tweezers to bend the metal clip up without taking it off. Fixed my Zowie FK1 mouse in just five minutes. Works perfect, other than needing replacement rubber sliders lol.
used the spring from another dead mose I had lying around you saved the life of a mouse today thank you
it took alot of time but it was worth it thanks for sharing such an amazing trick. i won't have to buy a new one
Might try this sometime this week, my mouse recently double right clicks on 1 singular click, otherwise going to replace it, so nothing to lose with trying this.
I'm so thankful a guide like this exists! Unfortunately, when I took off the cap for the switch, the button flew off on both and I couldn't find them cause they're so small, so be careful. Luckily I had a spare mouse to take them from, so yeah!
I've spent hours trying to put the copper back in place!
I almost give up and buy new one which is expensive. Still trying here
took an hour for that lil sht coil but it WORKEDDDDD
Thank you. For me, I tugged the front side a little bit over the latch beneath it so that it feels more stable to the touch and has the clicky sound.
You're welcome! I'll keep that tip in mind when performing this fix again. :)
total life saver!! you saved me from having to buy a new mouse
You're welcome man, I'm glad it worked for you! :)
Nobody likes the part with the buying a new mouse. :D
this helped me fix my Roccat Leadr mouse, but I will say putting the copper part back in the switch is hard borderline very hard
Thank you so much man, I got a Glorious model o and its left mouse button was clicking if I put to much pressure now when i click it doesnt happend anymore
I thought of buying another one but I tried to fix it first and I ended up not buying another model o
You earned a sub
thats coz ur debounce time is lower than 10 probs, just fix ur debounce time lol
@@helioks even if i set the debounce time to 16 it still doesnt fix it lol
@@qjam702 lol but you know Model o double click? It's for Minecraft gaming
@@erenyeager7603 oh so if I put the denounce time to 12 it still double clicks?
@@erenyeager7603 it's not the software it's the actual switch itself it's overused
Great, fixed my Logitech with this video, thanks!
Great video. Unfortunately, the mouse I tried to fix, Logitec G602, has much smaller springs and it was futile. So, I reprogrammed the buttons so the Right Click Button is now the Left Click Function and one of the side buttons controls the Right Click Function. It's not too bad. I'll get used to it. Thanks for the excellent video and the written description. BC
dude, use AutoHotkey to run this script and the double clicking will be gone :
LButton::
If (A_TimeSincePriorHotkey < 150) ;hyperclick
Return
Click Down
KeyWait, LButton
Click Up
Return
I have the reverse problem. It doesn't register the double clicks
Thanks, my click working fine now. Fixing the clip is very difficult but now it's done. 👍👏🙏🤗
If you are a minecraft bedwars geek, you would like hes mice.
Considering bedwars player use double clicking mouse to click faster.
Someone mouse use it as a feature by settnig the debounce to 0.
this mouse is good, but id rather use adjustable debounce time mices.
bro its very dogshit like imagine u are doing something and it starts double clicking like mine did its annoying af
Thank you sir, this was easier than expected, double click fixed
me who fixed this issue same way, didn't know it's called double click, I called it too sensitive switch. was looking for people having issue with mice after 6 months of usage.
Thank you for this tutorial and now i buy a new one
😅😂
I gave up trying to take the cover off after trying multiple times, so I just stuck a piece of tape over the switch and called it good lol. At least it works now
Oh.... so you're telling me i went on a manic episode completely destroying my mouse for nothing? "it is literally thorn to pieces every part of it out of anger"
Thank you, i just fixed my precious mouse due to your help
Found nothing close to my mouse and this guy literally has the exact model as mine wow thanks. But I came for the very part you didn't record lmao.
Thanks for postingthis online, I already fixed my mouse as per your instruction but one thing I noticed about my mouse is the switch I think placed in a wrong way for mine in the mouse factory I mean... The white button of the switch is on the left side of the switch box but its curve is on the right side.. Is there something wrong with that?
i fixed it without disassembly by pressing the left and right click buttons hard, but not too hard until it breaks for 10 seconds, blowing through the holes on the mouse where the click buttons are and shaking rapidly, repeating until it works. my mouse was double clicking 50% of the time and now it only double clicks once out of every 100 clicks, thanks reddit
You can just open the side button or any slightly used one and just change the spring and you dont need to do the bending stuff "wich is working but dont last long and feels shit".
Thanks. I was emboldened to dismantle my mouse ans fix it with 5x eyeglasses{when you are over 40}, spit{or masking tape to hold the button in place{, screwdriver, needle and tweezers.
Happy to hear this gave you the push to perform the fix. Enjoy your mouse! :D
I have the same mouse as you and I am having same problem on both right and left click
Is a brand new mouse cause the other one the left click aint working. But this new one double click.
dude this help me fix my razor mouse thank you
thanks, i tested on my old mouse and fixed it
BEFORE YOU START
what's not mentioned is that each of these micro switches are constructed differently, and many rely on precise placement by machine. If you are here watching this video to fix your mouse you are FAR BETTER OFF learning to solder or replacing the mouse, your likelihood of success is low.
Thank you, sir. You save my life today.
lol RIP to my G602, time to buy a new one. i tried, the little copper piece is soooo thin like paper, its done. well, it lasted longer than expected. got it in summer of 2019, so well worth it i guess. thanks for the video.
tried to like but my mouse unliked the video
why?
@@trevorgeorgesgolamco5333 the joke is that i tried to like the video but my mouse clicked again because double click
Pro tip
Use a floss pick to open the cover
How to do part 1: take off the switch cover ? Most difficult part that you didn’t show…
Yeah facts.. most important part of the video
Open an old mouse, open the microswitch recctangular box, take out the wierd shaped metal thingy, stick it in your broken mouse, no soldering required.
If you don't have an old mouse, order a microswitch for a couple dollars and take that metal thingy out.
Hello What type of camera has been used to make this video ?
This was too hard for me so I decided to do the
Neanderthal way and job done !!!
Can you make a tutorial that helps with the mouse, because i've changed the mouse 2 times and it's still double clicking, can u fix it with the laptop?
My mouse gets into this problem on both clicks, is this an issue or electronics?
way to go, now my bloody v8m working excellent. Thanks!
squeeze the buttons and blow air into it
I fixed my mouse thank you
Glad it helped :)
Cheers for the video, just fixed my mouse ;D
Bought Razer Trinity.. after 3 weeks it start clicking double.. i tried to click from different angles, and make myself so uncomfy doing it.. but now no matter from which angle i press it it does the same.. I really can't believe it.. Having friend his start doing that after 3 years lol.. i am just unlucky i guess
pro tip: fuck this noise, today i had a Q tip on my desk and decided to rip a bit of cotton off and stick it in front portion of the left click next to the scroll wheel. problem fucking solved.
DO NOT ATTEMPT THIS, you will just break that tiny spring and then you will have to buy new mouse eventually. because this dumb@ss didn't show the most crucial part, which is how to remove that spring mechanism because once it's bended at those side tiny bars it's not going to work no matter what you do.
luckily i had an old non working mouse which i directly unsoldered the connection and used that on my current mouse... and it's safe.
just go buy those tactile buttons from electric hardware shops and solder it instead of trying to fix the spring because it works if you know how to remove that spring carefully.
bro it didnt work i dont know how to get the latch off without breaking it
mine is not clicking anymore unlike the right button
Wish I could actually open my roccat kova like this. :(
I did that on my Roccat Tyon three times. Metal aging and oxidation happens. Sadly on many expensive mice no quality switches are installed.
Aaand he's back😁
my glorious model o 2 is just 3 months old😭😭😭
thank you i can now abuse my mouse again
i have a spare mouse but i will try a software that just blocks the 2nd click . any1 here that knows a good software?
AHK (v1)
import this script :
LButton::
If (A_TimeSincePriorHotkey < 150) ;hyperclick
Return
Click Down
KeyWait, LButton
Click Up
Return
Razer naga trinity best mouse but right click goes vroom vroom now
How ironic to have the exact same mouse. lmao
And I have been downloading drivers for a week ...
Now make a tutorial on how to make a mouse double click
Doing the exact opposite to double click on Minecraft
I can't figure out how to open the switch covers for the life of me...
man poverty sucks, my mouse is 6 years old double clicking, randomly dying, RGB lights fading, and MB4 broken🤣🤣🤣🤣
what if u want to do the opposite make it double click
You can setup a macro from your mouse software. Modifying the switches by hand will probably not yield reliable results :)
@@PearCrew okie ty
comment for the algorithm :D
Somebody knows how the business works xD
nice
Wow you're fast man. Glad you liked it ;)
At this point I'm just gonna buy a new mouse
i used i nice methode to fix mine without opening, i uploaded the steps here.
lifesaver
Ok I dont know how to open my mouse
After I'd reassembled my mouse I clicked the like-button, but it instantly unliked it. So since the tutorial didn't work I clicked the dislike button, and again it instantly undisliked the video!
Minecraft players be like - ........................................... :)
I see your face
people who are with the issue right now 👇
Thanks
get a new mouse people. this sounds too stressful for butterfingers like mine
Good job I don't have you fingers then
Exactly what I was thinking
Nevermind...i buy a new ones..so complicated..
A sub is in order if this works
me whos 12: what
ok too many effort to a $3 logitech mouse, maybe i just buy a new one
Honestly, all that double clicking is a sign that your mice needs to be retired.
It served you for a long time, let the little guy rest and buy a new already.