I Built a $7,221.51 PC (Worth it?)
Vložit
- čas přidán 13. 05. 2024
- what I did to that 4090 was not ok😂
UPDATE:
So yeah after some troubleshooting with the last pc, I figured out the CPU was dead. A simple replacement turned into this💀
Main Channel: @12th
0:00 RIP PC
0:56 the PARTS
3:41 the BUILD
4:25 $7,221 mistake
6:57 first boot
7:43 TEST: Worth it? - Hry
SOOO was the dual 4090s worth it???😅
my goal of 2024 is to become more active on this channel and get more personal with you guys. Hope you enjoyed!💙
Update:
Turns out it was my pc broke because that CPU was done for. I put it into another pc and after 10 minutes it froze up 😬 scary
sell the other parts and trash out the cpu
It was not worth it. It has no upgrade in performance at all with no SLI. It's just a 3 thousand dollar decoration piece.
Nevermind, you are using this for rendering. I still don't think it's worth it still though because the second 4090 is running slower due to the slower PCIE lane on the mobo.
oh yeah make sure to go get sag brackets to stop the 4090s from sagging after a while especially the one on the bottom since it only has 2 slots
The balancing on this isn't good, the second GPU runs slower, plus no sli, so unless your rendering in 2 different programs at once, or if your rendering and gaming at the same time. You should've just put more money into your CPU and/ or waited for a 4090 super, if that was released, I don't remember
@@acceptablexy4805 yessir good catch! I did end up installing 2 brackets off cam. they some thick bois
Cutting small hole in a case that costs 240$ ❌
Cutting a piece of 2000$ gpu ✅
yooo bro got the opera gx swag!?
bro turned a $200 fix into $7000
bro just needs a new mb lol
@@n64slayer yeah all he had to do was replace 1 part, could've been the ram
Content is content if your not doing some shi like black face. Remember tho, game is not game
@@rochester3 true
@@Jetbigmoney2 hopefully its a business expense
Bro called me broke in 100 languages💀
Same bro 😂
Bro my pc costs 800 bucks 😂
Nah bro did it with 7,139 languages 💀
@@user-vr3pq4it2umine is 2k
@@user-vr3pq4it2ui have an laptop😂 that is 500 bucks
89 degrees on a desktop: *THATS RUNNING TOO HOT!*
89 degrees on a laptop: *Wow! That running cool for once!*
Just turn off CPU boost and your temperatures will not cross above to 70 degrees
money doesn't buy knowledge. You NEED to turn these bottom fans around. This configuration will blow air away from your gpu fans. Your gpu is fighting for it's life there. Turn the bottom and the top fans around so bottom is intake and top is exhaust.
You're right money doesn't buy knowledge
we need to like this so he sees it
Yesss
So much this. Not only that, he's bringing hot air from the AIO inside the case, while competing with the GPUs for airflow direction.
but how? he doesn't have the space
7 grand for a pc and his phone case is yellow 💀
I mean he spent every penny he had on his GPU
@@Dawird TWICE
priorities, yo.
this is a legendary build bro its amazing, especially when you got the first boot
akimbo 4090's goes HARD!🔥
little bro when are you gonna upload
Fr we need content and u need money lol upload I’ll take a video of u like sitting on the toilet playing anything lol upload
Omg I remember you talked about 12th hour in the faze rc video 😎
E
Part 2
czcams.com/video/4XjBoMd3BVE/video.html
"It invented a whole new category, Frames per minuite!"
Me with a 1660 super at 4096 samples on cycles: "Those are rookie numbers, gotta get those numbers up"
You be running FPD
Frames per day
Really I'm running frames per month or maybe even frams per year(intel uhd 620)
br my ass is on a gtx 750 im on frames per week
dawg i use a school laptop im on frames per month🗿🗿
@@Thepynetrek ayyy let's go
You did an amazing job! And with only 4 videos and 14k followers, you ARE a CZcams star in the making! Keep it up!
Seeing those blender numbers astounded me. Thought 2 4090s was ridiculous til I saw the end. Good video.
Hell, I didn't know you could build a workstation for less than $10,000 that was actually worth using.
doubt you do anything that actually pushes a 10k workstation
sounds like a blessing tbh@@christoolshed7746
@@christoolshed7746 Neural netwrok training will crush a 10k workstation
@@christoolshed7746 You can barely do video editing efficiently as most of your money will be spent on memory.
@@christoolshed7746 tbh pretty easy to push a 10k to the limit specially with Geographic Information Systems (GIS) or Ai training or 3d rendering like that case. Im using dual 3090s in SLI and is cheaper than a single A6000, and bro I aways wish I had money to have dual A6000 when I get out-of memory messages.
So. professional workloads is no joke.
Excited to see how you use this new setup for your content! Also, the animated logo on the pc looks SICK
bro kooked so hard on the aesthetics its actually crazy
This was wholesome to watch. congratulations
btw you should probably flip the fans on the bottom and top so you can have actual airflow
u right
Yes
Yes Sir, intake on the bottom not exhaust
@@shaundasheepmurphy1589those are reverse blades…
@@Microsoft_Flight_Simulator No they are not. You can see it at 7:53
Nice video dude, I actually thought you should have 500k subs, keep going bro, this quality of work, you’ll make it
I subbed for your pain brother. Good luck.
LMFAO BRO, youre funny as hell. Subscribed!
Ayo, the fact you added your logo animation for the water cooler display is tight AF! 💪
AYE thanks Xtra!
Done the same with mine. Created a whole ass new animation in AE and it's so cold
Normally dual 4090 is way too ridiculous but you actually need them...
Keep doing your thing bro🔥
sorry you had to take out a loan for this one mate. i subbed and liked cuz ur content is amazing. CZcams not paying ya'll anyways but we making it out the hood with this one
Should've applied for NVidia's new life insurance programme.
As an it guy the bottom 4090 at x4 sooooo it might be a bit bottle neck and under used … 😅 maybe change the motherboard to an x670e creator or any dual x8 so you’ll be able to use the 2nd 4090 at full power 😅😊
There's those motherboards :
MPG X670E CARBON WIFI
MEG X670E ACE
MEG X670E GODLIKE
X670E Taichi
Proart X670E Creator
getting a budget gaming motherboard for a dual 4090 workstation is truly a waste...
@@wpdlatm5576 sometimes people aren't PC enthousiaste so it's important to teach them 🤷♂️😇
ignorance is bliss shhh
I don't think bus width is that big of a concern with GPU rendering, as once the scene is loaded in VRAM the GPU can does all the processing on its own without talking to system memory much. The only exception is if the scene exceeds the VRAM and pools over into system memory, which you'd avoid at all costs as it is orders of magnitude slower, and in some render engines less stable.
Never knew bro knows alot about PC builds, you killed it with those dual 4090s 🔥🙏
Oh he does not, I was suspecting the same thing someone else pointed out above, the new 4090 is underutilized just cause of the wrong motherboard
@@ADB-_ shhhhhhhh
Your editing funny asf 😂
Thats a great idea xD i just got my msi suprim x 4090 last week. Not doing blender so a second wouldnt be worth it to me but hey, its a phenomenal idea
can't wait for what you cook with this!
I love your main channel bro. You are an inspiration to me (I'm starting to learn Blender, and I'm both excited and frightened loll)
But please upload more on this channel as well if you can. You are hilarious and really talented! Take care
yooo thanks so much bro! Best of luck with the blender adventures! It's so much fun
I subbed because how natural you are as a content creator.
Really only seen this video, none of your others, so no clue what your channel is even about. But the editing is definitely on par with 1-3 mill subscriber count channels. Good job.
you should change the fan orientations so it pulls in from the bottom and out the top (because heat rises)
Flip your top fans and use it as exhaust, then the bottom fans for intake.
Another dude with money with no clue..
just found your channel i subbed lover your vids tbh
bro u need my sub lol 😭. nice vid btw keep it up :).
I wanna build a pc but i dont got the money so its cool to see the pc.
the clarity you bring to your subjects is beyond impressive!
Awesome build! I have the same case and it's tricky to fit all the cables in there. Lian Li fans can run 3 fans on 1 cable which is really helpful!
Hey man, Shout out From the US Marine Corps! Gotta say I love your video brotha! Very awesome. Keep up the great work! ❤🤍💙💛
Me just begging for my moms labtop when I was small be like😂😂😂
Also u should post more!
can i get your broken PC, cuz i dont have one
lol
Give this man the pc
I hope you are planning to try large language model on this computer. Because 48GB of vram allow to run pretty smart AI model.
I don't know the first thing about that, but that would be awesome!
Lm studio, run your own personal LLM (chatgpt) but without any guardrails.
Now the waiting time reduces!! Good for ya man, but yea it costs your life savings for satisfaction. W vid
Probably one of the only people to have a dual 4090 pc
crazy.
quick tip, your airflow configuration isn't optimal AT ALL and you're most likely leaving a lot of performance on the table becuase of it, easy fix tho
Your top 3 fans mounted on your aio radiator are set to intake and your 3 bottom fans are set to exhaust, not optimal because the 3 bottom ones are pushing air out of your case right in front of the 3 fans of your second 4090, you should get the bottom 3 fans as intake so you get fresh air from underneath the case and it'll get fed directly to your bottom 4090.
Your top 3 fans should be set as exhaust because right now they're getting fresh air in, which instantly passes through your aio rad and gets hot from it, so the air you're getting in is already hot.
Hot air tends to rise up while cooler air tends to stick closer to the ground, same with a room halfway filled with smoke, the smoke sits closer to the ceiling than it does to the floor, so the best airflow setup would be intake at the bottom (just flip the fans) to get fresh air in, and exhaust at the top to get hot air out of the case. Your side fans are set up correctly but the top/bottom ones will cost you performance because all your components will run hotter. Hope this was helpfull, would be a shame to leave performance out in such an OP rig. Have a great day !
Thanks for the advice! I've actually gotten a few comments mentioning this. I'm gonna fix it!
In the end it doesn't make much difference. Hot air / cold air does make a difference in a passive system, but even a small 120mm would completely remove that effect. Make sure you have more fans intaking than exhausting to maintain positive pressure, if you can get intake close to the GPU it's better, but you can have intake for your rad aswell. Without dividing up the airflow with a proper divider you won't do more than a couple of fps.
just rip the walls off and stick the pc on your ac vent. W cooling.@@Ryan12th
@@oskarwallin8715 with how much he's spendng taking 10-20 mins to swap the direction of the fans is probably worthwhile
Honestly this whole dual 4090 set up is shit, High end GPU shouldn't even have air cooling after some point. A 4 slot card just doesn't make sense just pay an experienced builder a 100 bucks for some water cooling at that point
I believe you can game on 2 4090's. You can set the 2nd one to do the PhysX (in the Nvidia Control Panel). It won't be double the performance, but it should still be a considerable uplift.
bro i actually became scared for a second when you did that fake freeze cus i used to have a low end laptop and it always did that
i never thought id enjoy a pc building video that much
That fan orientation tho, just proves that with unlimited amount of money you cant buy knowledge on how to build a pc the right way😂
the voice over meme at 7:17 was the most accurate thing in this video😭 shi looks so magnificent!!!
love your comedy brother, you're doing it right.
lets goo haha thanks!
I guess when you use a substantial amount of money you can buy time. Awesome video!
This man right here,has dual 4090's
AND I'M STUCK WITH A GODDAMN GT 710!!!
But don't worry tho,i'll upgrade this year so it's gonna be also my last year with the 710.
are you upgrading to dual 4090s?
@@andrei769 he upgrades to triple 4090s
@@andrei769 My man,do you think i'm that rich lmao?
GT 710 is like a free GPU~
there is a solid chance that rtx 5090 is released in november/december
Ah yes, you had to either remove some metal part which does nothing and you probably can even replace it, from a $190 case or literally shave off the metal part from the $2300 GPU and you went for the second option,
The most logical, analytical decision ever, besides building a dual 4090 PC, with a loan money too. This is too much of a human absurdity in the morning, just woke up minutes ago.
And the part had screws to undo it also.
@@ShinigamiLilithyeah, thats why I said 'remove', instead of 'break', 'bend', etc.
I cant even comprehend how flawed his thought process is.
it wasn't actually loan money 😭his main youtube has 1m+ subs, hes def rich af
@@paradise_ 'small loan' sounds pretty specific, therefore I dont think hes joking but regardless, thats why I said 'too' at the end - building a dual 4090 PC is not a smart decision in general, getting a loan for it would just make it worse.
@@META313. "took out a small loan of x" is a common joke 😭. he has 1m subs on his main youtube and 100m+ views which is at least 6-7 figures from just ad revenue, he doesnt need a loan whatsoever
Still gonna miss the SLI/Nv-link bridges those kinda helped tie together multi gpu builds in the past both aesthetically and literally! :D
Awesome!!! Sick ride man sick ride!! Lovit
bro spent $7,221.51 to get 30 seconds better in blender...
30 seconds pretty slow thoo
@@Diamondsword85_RS lol 30 seconds is 30 seconds
yes but 30 seconds is also like 3 hours
more gpu power = less break time while rendering in blender
that is a good point haha
i also once had the same problem with my pc as your old pc. With me the problem was in my gpu, the gpu overheated so fast that my pc crashed before the bios screen. I returned my pre built pc and built my own one after that tho.
This actually happened to me recently, i took it to a technician and he said it was a problem with the disk port, it may have been because of the fan that might have popped out with heat as well
Triple 4090 when?
Ikr
Bro why is your channel named "12th" ?
He has two
Why not??
😂
This his second channel
maybe because he is 12th fail. 💀
@@BDbongogamer U from Bharat ?...
Dude, as someone who has just bought my first ever computer, the parts haven't even arrived and the excitement is through the roof (until Amazon decided to leave the deliveries outside in the rain without ringing the doorbell, meaning I've had to send back half of the parts)...
I've wanted a computer for years and it's finally happening
First ever build with a budget of 1800€, I actually can't wait!
The anxiousness to making something go wrong when I get to building it, the guts you have to even go saw off a part of the GPU, especially with that price, you are a mad one for that 😂
I can't wait to see what upcoming plans you have!
Congratulations ❤
nah this vid got me fw you love the humor
haha lets go
Daymn bro !! Thats cool 🔥🔥
Great vid dont know why you don't have at least 1000000 subs btw +1 sub
His main channel have over 1M subs
Thing looks like a Work of Art!
When will you upload next vedio bcz its satisfying to watch learn and put more ideas on something that you like ,i really appreciate it 😊
I cant even assemble 1 piece but you THE WHOLE THING
I feel like... you could have installed the rad on the back of the case so that you could set the bottom and back fans to intake and the top to exhaust? Color scheme is sick
I would be curious to know how the thermals are with this. I've been looking to add a second 4090 to my render PC but my biggest concerns is heat. I don't want to do a full custom loop, but I don't want fanzilla either.
It's actually great! I flipped the case fan orientation around since this video. Now the top gpu while rendering will sit at 50-60c. 50c being lower sample renders where the GPU isn't at 100% for long periods. On the rare occasion I've seen spikes of 65c on renders where I've cranked the samples. The bottom gpu is a breeze and is about 5-10c cooler than the top while rendering. These cards have beefy coolers. I will say, on long renders my room will get pretty toasty haha. I use a fan to exhaust air out of the room during these renders lol
Your top fans are set to intake, you should probably change that to exhaust because as hot air rises it will be pushed back down to the components and raise the temperature
That ultra-wide 4090 got the Sawed-off Shotgun treatment.
when your dream pc isnt the one with your 4090 that you already own.
the editing is a masterpiece , didnt laugh at a video this much in while, enjoy the new pc bro and keep it up
I subbed, liked, and commented just so this man can pay back his loan for this pc build.
would it help you if you select the processor's GPU too? or that will give you crashing issues?
it really hurt to see you put a grinder to that 4090 but after you sanded it down it looked really clean ngl
bro stylin the sponge bob socks witht the crocs XD
if something makes u happy then continue doing it!
any reason you got the o11 dynamic and not the o11 dynamic evo case? id assume their prices would be similar
I built my first pc a while back in a NZXT H1 V2 with a 4080 and to get the GPU to fit i had to bend the 3rd slot metal thing, and i had to get a specific 4080 from MSI
bro you need to switch top and bottoms fans airflow, your radiator is going to be a vacuum cleaner, and your bottom gpu is dying rn. Also that there iis a gap on the side fans on the top is giving me anxiety. Thats all i have to say. Still pretty cool.
the part where he said hopefuly this sh dont explode got me up
Dame man I was searching for multiple gpu on the AMD AM5 MOTHERBOARD but there will be no gpu pooling for rendering how did u manage to link up 2x 4090
You should have taken the new Corsair Link fans to go deeper into your wallter ( also easier to cable manage)
i hope this will make your upload schedule better😂
I'm currently working on buying my dream pc right now, I currently have a 3070 ti with core i7 10700k, I'm gonna get a 4080 super with a core i9 14900k I've always wanted this since not only will I be working by myself to get this money but ill be getting real life experience down the road, it will take me roughly around 6 months to buy everything (faster if reselling goes well). I have only bought my pc case right now which is the NZXT h9 flow. Its gonna look so amazing and I cant wait to invest in my gaming career, all while working on people and selling skills in the process if gaming doesn't work out.
when you did that freezing animation and it went black out i had a mini heart attack
bro got the 8120
I cried while you cut the gpu thing off
Is the CPU you use better than the Intel i9 14900k? The best for gaming under heavy load
IF there was possibility for NVLink would be rendering even faster?
Can you use both RTX 4090 at the same time?? I heard it doesn't support SLi like 30 series
Yes mom , I need this for my powerpoint presentation.
your proccessor alone worth my setup
Great Job! Crazy choice *wallet be like "getting goose bumps"
UNDERATED!!
His main channel have over 1M subs
Dual 4090, now that's a PC build I can get behind