Koda Motion Activated LED Security Floodlight Installation| LM030022 |

[@user-wx3wc4bo7c]

Works great 👍, installation was easy didn't get electrocuted 👍👍

[@KodaBuilt]

Thank you for your positive feedback!

[@charlie90501]

Thanks for the video. It made installation a snap!! The instructions that came with the light was terrible.

[@KodaBuilt]

Hello Charlie
Thank you for your feedback regarding the installation instructional video as well as the printed instructions. It is our goal to provide the best experience when using our products and I will personally look into the instructions to see how we can improve on them. Thank you again and I hope you enjoy our Floodlight.

[@stevelew47]

I just went to the switch and the after a few seconds I did have power. So now I need to adjust the sensor. Thanks!

[@KodaBuilt]

Hi Steve, let us know if you need any additional help.

[@stevelew47]

I put all the wires in the plug. Turned the power on and it did show voltage. I screwed the light in the mount and the light turned on. Now it doesn't want to turn on. Do I have to reset the mount so it hooks up to the prongs. Maybe I need to screw it in harder. Thanks for your help.

[@KodaBuilt]

Hi Steve, you can always contact our customer service team to help walk you through the installation steps. We are here Monday-Fridays from 8-5pm PST.

[@beans7199]

Is it possible to have the middle light not activated just the other two?

[@KodaBuilt]

Unfortunately not, but you can adjust the brightness!

[@castironkev]

Easy installation, but it's not coming on! Double checked wires, there's power. Almost seems like the 3 prong connection isn't engaging?

[@ClaudiaGonzalez-lv9qr]

I'm having the same issue. Everything is ok but is not coming on.. were you able to find out what the problem was? Thank you!

[@castironkev]

@@ClaudiaGonzalez-lv9qr I tried everything! I returned it, then did it again with a new unit- working fine so far...

[@KodaBuilt]

Hello Cast Iron Kev, the Motion Activated LED Security Fixture does have a Dusk to Dawn feature, meaning the fixture will remain off when the sensor detects light. If the fixture is not turning on, please contact our customer service for additional troubleshooting help. KODA

[@castironkev]

@Koda Built I appreciate the help- it was a faulty unit and was replaced.. works perfectly now!

[@KodaBuilt]

@@castironkev I am glad to hear it, Sorry for my late response to all the inquires. They will be handled in a more timely fashion going forward. Have a great day! KODA

[@MihovTV]

Thanks

[@lifesabre]

The outside two bulbs stay on all the time and the middle one never comes on, did I install wrong?
Thanks

[@KodaBuilt]

Hey there! Thanks for your inquiry. Our best suggestion is to call into our customer support so they can provide solutions to fix this over the phone.
[phone]
Monday to Saturday
8am to 5pm Pacific Time

[@lifesabre]

@@KodaBuilt I have mine hardwired direct to a breaker would that make it behave differently?

[@dannysichon9899]

Can I plug the Koda Motion activated LED security floodlight to an existing socket/ If I can, how can I do it ?

[@KodaBuilt]

Hi there Danny - thank you for your inquiry. This floodlight is only able to be hardwired to a junction box for installation, there is no plug. For further information on set up, please see the user manual for the Motion Activated LED Security Floodlight Installation| LM030022 in the below link:
cdn.shopify.com/s/files/1/0014/1534/8284/files/user-manual-koda-motion-activated-led-security-floodlight-lm030022.pdf?v=1597703315

[@Josue-rd5gt]

Is there an always on mode? For example, my old lights that I currently have, if you flip the lights on and off 3 times, the light stays on until I flip switch to off position.

[@KodaBuilt]

Hi there - thank you for reaching out with your inquiry.
Unfortunately not. Only workaround is the manual override mode you described, but that will last only 6 hours.

[@brandon-kg2vd]

Is there a way to keep it on all night and turn off in the morning?

[@KodaBuilt]

Hi there! It sounds like you might be looking for the Manual Override function. To do so you will need to follow these steps so you can manually switch the lights on/off. Although, the light will not stay on technically all night. It automatically reverts back to Auto Mode after 6 hours.
To enable the manual override function, rotate the motion sensor so the controls
face towards the ground.
• When power is on, the PIR sensor enters a “warm-up” period for about 40
seconds, then automatically switches into AUTO MODE.
• During AUTO MODE, by switching the main switch OFF for about 1 second then
ON, the PIR sensor will automatically change into MANUAL MODE from AUTO
MODE. In MANUAL MODE, the lights will remain ON, and will NOT be controlled
by time duration or ambient light (LUX) levels. The MANUAL MODE will
change to AUTO MODE in 6 hours automatically.
T

[@jesus5082]

What's that black thing that looks like a gasket that is shown at some parts of the video?

[@KodaBuilt]

Hi there - thank you for your inquiry.
It's caulking that creates watertight seal between the light's back plate and the junction box opening.

[@nickjohnson1352]

Can you turn the motion sensor off?

[@KodaBuilt]

Hello Let's Go Habs, the sensor detection feature is an integrated designed that cannot be turned off. Please contact our customer service department if you have any additional questions. KODA

[@Wadendawater19028]

Can this be eave mounted?

[@jimlinderman5911]

read the manual

[@KodaBuilt]

Hello Shelton, yes the installation instructions on page 5 show how to install the fixture under an Eave. KODA

[@jesuseduardogarciaarredond5260]

How can I keep the light on?

[@abadlobster5461]

Let me know if you find out. I only want to keep these if they can be left on with a light switch.

[@abadlobster5461]

Look at the manual on the website. It shows how to do it.

[@KodaBuilt]

Hello Jesus, the installation instructions on page 11 states how to turn on the Manual Mode: During AUTO MODE, by switching the main switch OFF for about 1 second then ON, the PIR sensor will automatically change into MANUAL MODE from AUTO MODE. In MANUAL MODE, the lights will remain ON, and will NOT be controlled by time duration or ambient light (LUX) levels. The MANUAL MODE will change to AUTO MODE in 6 hours automatically. Please contact our customer service department if you have any additional questions. KODA

[@lchmiami2844]

Is this flood light work dust to dawn

[@KodaBuilt]

Hi there! Yes, the Passive Infrared (PIR) sensor also acts as a dusk-to-dawn photosensor. It will turn on at dusk, turn off at dawn and not require manual switching. Just make sure to check your settings! If placed in Test or Manual modes, unit will override dusk-to-dawn for testing in the day. (very easy setting to forget!)

[@fabutastic4ever]

My motion sensors worked in the beginning and now wouldn’t turn off, they stay on all day.

[@KodaBuilt]

Hello Fabutastic4ever, we are sorry to hear about your experience with the fixture. I would invite you to call our customer service department to troubleshoot the fixture. 866-294-9244 Monday - Saturday from 8am - 5pm. PST

[@charlie90501]

You have to reset it by turning it of from the switch for 30 seconds then back on.

[@rogerwilliams2042]

@@charlie90501where is that switch

[@kevinmazariego4753]

My sensor is having issues on detecting

[@KodaBuilt]

Hello Kevin, we are sorry to hear about your experience with our Motion Activated LED Security Floodlight fixture, please contact our customer service department to help troubleshoot the issue. You can reach us at: [phone] Monday to Saturday, 8am to 5pm Pacific Time

[@eliramirez9958]

Hi mine doesn’t turn off, how can I reset it?

[@KodaBuilt]

Good Morning Eli, I would like to contact our Customer Service Team to help troubleshoot your issue. You can contact us at [phone] Monday-Friday from 8am - 5pm

[@eliramirez9958]

@@KodaBuilt it resolved by itself it was raining a lot, thank you tho