Amazing small backyard DIY modern greenhouse built cheap!

Sdílet
Vložit
  • čas přidán 6. 01. 2024
  • DIY backyard greenhouse build. All of the lumber in this greenhouse (except the pressure treated 4x4 base and cedar skirting) is from ripped down 2x6 boards from a deck demolition. I chose the shed roof to maximize sun exposure. It’s 12’x8’
    The main cost is the plastic panels. I went with a higher-end polycarbonate product, but you could probably cut some cost if you buy the cheaper stuff at a big box store.
    Door hardware from Amazon: WINSOON Sliding Barn Door Guide
    EaseLife Heavy Duty Sliding Barn Door Hardware
    Estimated cost breakdown:
    Concrete, anchors and blocks: $100
    PT 4x4 base: $80
    Framing Lumber: Free, but wrecked 3 table saw blades by hitting screws.
    8mm twin wall polycarbonate: $1500 (including trim pieces, fasteners and delivery)
    Flashing: $100
    Cedar skirting (not necessary): $80
    Sliding door hardware and roller guides (Amazon) : $135
    Wood stain/sealer: $50
    Misc screws and staples: $150
    Total about $2200
    Music by Music Unlimited from Pixabay
  • Jak na to + styl

Komentáře • 81

  • @nicelittlesaturday
    @nicelittlesaturday  Před 5 měsíci +2

    *Questions? Ask in the comments. Thanks for watching.*

    • @ryanalexander1507
      @ryanalexander1507 Před 3 měsíci +1

      What's the cost on something like this?

    • @nicelittlesaturday
      @nicelittlesaturday  Před 3 měsíci

      @@ryanalexander1507 There's a full breakdown in the description. Thanks for watching!

  • @chaundadon2612
    @chaundadon2612 Před 17 dny +1

    About 30 mins into this thing and you’ve def earned a subscriber, awesome build, no long intro, stupid narration, no fluff just straight to it! Thank you for your hard work sir !

  • @rpireland6131
    @rpireland6131 Před 3 měsíci +2

    Very impressive! This female watched every details of your video to the end. I wished I could build one like this 😇

  • @marjoleinvnoort6961
    @marjoleinvnoort6961 Před 2 měsíci +1

    Great video, watched the whole video. Love how people can build beautiful things ❤

  • @debbiewilhelm3035
    @debbiewilhelm3035 Před 4 měsíci +2

    Great video and craftmanship! Love the details.

  • @bostitchrider2026
    @bostitchrider2026 Před 2 měsíci +1

    Very nice, great job! You made recycled look classy and fit your landscape style.

  • @hernandomunoz429
    @hernandomunoz429 Před 3 měsíci +2

    I loved the video. I wished I have seen your video before I started to build my own. I am a beginner. I learned so much by just watching you. Thank you for your video.

  • @dr.astro.hutchins
    @dr.astro.hutchins Před 5 měsíci +1

    Beautiful ! Great insight 👍

  • @martinballard2392
    @martinballard2392 Před 5 měsíci +1

    Brilliant - good job 👍 👍

  • @conniegarcia5626
    @conniegarcia5626 Před 4 měsíci +1

    Wow! Its beautiful! Its what dreams are made of.😊

  • @markandthedogs368
    @markandthedogs368 Před 4 měsíci +1

    wow, great video and a very very nice greenhouse. thx for sharing and regards from germany

  • @Mark-id7fq
    @Mark-id7fq Před 2 měsíci +1

    Thx for posting this! Very detailed excellent work! This is exactly what I’d like to build, possibly 12x16 or 18
    We’d like it to be a combo greenhouse/ sitting area. Cheers!

  • @timothyreebjr5826
    @timothyreebjr5826 Před 12 dny +1

    The background music is incredible at 2x playback speed, trust me.

  • @lucasellyson6872
    @lucasellyson6872 Před měsícem +1

    Nice build

  • @jdavid869
    @jdavid869 Před 4 měsíci +2

    Beautiful work man of God 😊

  • @mikekruger9261
    @mikekruger9261 Před 4 měsíci +2

    Hast du sehr gut gemacht! Kann man sich den plan mal anschauen? Würde dies gern nachbauen 😀

  • @gratefultedd969
    @gratefultedd969 Před 3 měsíci +1

    I loved this build. Imagine how much easier it would have been without cutting 2x6 into 2x4's . If dudebhad a framing gun. And acrown stapler or at least a 16 finish nailer. Painful watching all that siding go on with long assed screws.
    Sweet build though . Wait whats this air tiil he bustedbout?

  • @Gearstudio18
    @Gearstudio18 Před 4 měsíci +1

    Very nice video, seems like in Oregon?

  • @g0DMVzzzz
    @g0DMVzzzz Před 3 měsíci +1

    Sharp.

  • @dajuice7030
    @dajuice7030 Před měsícem +1

    Love the build. I am looking to build the exact same one. Do you happen to have cut plans?

    • @nicelittlesaturday
      @nicelittlesaturday  Před měsícem +2

      I don’t have plans. Kind of made it up as I went. There’s a few details in the description. Thanks for watching and good luck with your build.

    • @dajuice7030
      @dajuice7030 Před měsícem

      @@nicelittlesaturday yeah I’ll just sketch something up. Do you know the height of the to side walls?

  • @_Solmedia
    @_Solmedia Před 6 měsíci +1

    this is a man of christ.

  • @RK-sz1qi
    @RK-sz1qi Před 3 měsíci +1

    Great Green house. thanks for making the video. I am new to DIY and I have a question around the angle for the side panels. How much angle we have to put to get the angle? thanks in advance.

  • @almatallaksen4625
    @almatallaksen4625 Před 2 měsíci +1

    ???Question??? What color is the wood stain? It is a lovely color. Great job! The greenhouse is awesome!!

  • @unalla6321
    @unalla6321 Před 4 měsíci +1

    Can you provide how many sqft)size) of panels required for this.

  • @debbiewilhelm3035
    @debbiewilhelm3035 Před 4 měsíci +1

    Do you find having 2 barn doors is enough ventilation? Are you planning to add a fan? Where do you get polycarbonate sheets? You do nice work. Love the reclaimed wood. Some of the cuts showed your bravery😉

    • @nicelittlesaturday
      @nicelittlesaturday  Před 4 měsíci +2

      I may add a solar fan. Haven’t been through a summer with it yet though so I don’t know if it’s needed.
      Poly sheets are from a local plastics supplier.
      I appreciate your comments! Thanks.

  • @kimsutlive7812
    @kimsutlive7812 Před 2 měsíci +1

    Beautiful build. Clicked on it to try to build but new to woodworking and need dimensions and details. So frustrating trying to figure out without dialogue or plans.

  • @terryarger7830
    @terryarger7830 Před měsícem +1

    Gorgeous build but the sliding doors may become a problem wrt letting cod in and heat out

    • @nicelittlesaturday
      @nicelittlesaturday  Před měsícem

      I partially open both doors on hot days and I’ve added some ventilation fans. The main reason for the build was to protect our plants from deer.

  • @montanamott3397
    @montanamott3397 Před 4 měsíci +1

    What is your Slope? Great design and method. Thanks!

    • @nicelittlesaturday
      @nicelittlesaturday  Před 4 měsíci +1

      The roof slope is 15 degrees (pretty sure). Thanks for watching!

  • @escaping344
    @escaping344 Před 3 měsíci +1

    *I know his neighbors appreciate that off-grid lifestyle!*

  • @swingarm2012
    @swingarm2012 Před 5 měsíci +2

    Can you tell me what you used in the ground for support? At first I saw what looked to be metal rods, then you had blocks with some type of bracket....

    • @nicelittlesaturday
      @nicelittlesaturday  Před 5 měsíci +2

      I have steel post brackets embedded in concrete on each corner and pre-cast concrete pier blocks with brackets on the sides. It's probably overkill, but I wanted some air space between the pressure treated 4x4 base and the ground. Let me know if you need more info.

    • @swingarm2012
      @swingarm2012 Před 5 měsíci

      @@nicelittlesaturday Just wanted to make sure.. This project has been on the to do list for some time and looking to start working on it soon. Actually, like you I just pulled apart a deck and wanted to reuse the wood.. Love the video and thank you for posting. Great job!

  • @terrybyrd9587
    @terrybyrd9587 Před 3 měsíci +1

    Where did you purchase your poly panels and tracks? What name brand are they? Thanks great Job!

    • @nicelittlesaturday
      @nicelittlesaturday  Před 3 měsíci

      It’s called Polygal. You can find a vendor at Plaskolite.com.

  • @Linzeea1
    @Linzeea1 Před 2 měsíci +1

    Beautiful job well done!🤩👏👏What's the degree angle of roof??

  • @user-bf7xz4mq1j
    @user-bf7xz4mq1j Před 6 měsíci +1

    where did you get polycarbonate panels and locking channel for panels

  • @michaelcohen880
    @michaelcohen880 Před 2 měsíci +1

    What is the exact makeup of the interior flooring? Gravel only? Pavers? and how high up on 4x4 base timbers does the flooring go? Is it airtight? Thanks in advance.

    • @nicelittlesaturday
      @nicelittlesaturday  Před 2 měsíci

      I just used gravel for the floor and left a small air space under the 4x4 base to keep it dry. So, it's not airtight at all. Thanks for watching!

    • @michaelcohen880
      @michaelcohen880 Před 2 měsíci +1

      @@nicelittlesaturday Thanks! I’m getting ready to build my own version of your greenhouse! Appreciate the video very much!

  • @pauldonnelly9783
    @pauldonnelly9783 Před 7 dny

    Hi in the middle of a build like yours for my daughters , can i ask hight of the front vs back for slope, and roughly how much over hang.
    Im thinking of 7.5ft back 9ft front up to headers, 1ft over hang ? Love yours, great workmsnship. Cheers Paul

    • @nicelittlesaturday
      @nicelittlesaturday  Před 7 dny +1

      Mine is 7’ back wall, 9’ front wall. Slope ends up about 15 degrees I think. Overhang is about 1’. Now that I’m growing tomatoes in it, the back wall could be a little taller. The plants are getting close to the ceiling. Watch my other video about the vent fans and plant benches. Both are working great. Thanks for watching!

    • @pauldonnelly9783
      @pauldonnelly9783 Před 7 dny +1

      ​@@nicelittlesaturdayspot on mate, seen vents video great idea. Again great work. 👍 thanks for info .cheers Paul

  • @pang-ngiavang1956
    @pang-ngiavang1956 Před 5 měsíci +1

    What kind of polycarbonate panels did you use for the greenhouse?

  • @iwonaczapla2406
    @iwonaczapla2406 Před 3 měsíci +1

    What’s it called that metal ridge you put on top of bottom cladding in 49:46 min and 53:00

  • @gonefishinsask
    @gonefishinsask Před 3 měsíci +1

    would like to know dimensions? and is this in US cost. BY the way it turned out Awsome @@@

  • @scottwagner6908
    @scottwagner6908 Před 2 měsíci

    Did you use any ball bearings making this? How many hot dogs were consumed?

  • @gradualclearing61
    @gradualclearing61 Před 3 měsíci +3

    Planning my own build. I like the way yours looks and would have liked to watch it. However I could only make it a few minutes of the ridiculous and repetitive music. Did you think about a person watching the entire video with the sound on?

    • @mandyyoung3804
      @mandyyoung3804 Před 2 měsíci +8

      Did you think to turn the volume down?😂

    • @nicelittlesaturday
      @nicelittlesaturday  Před 2 měsíci +5

      You're not completely wrong. A few of the tracks run a little long. Fortunately, CZcams provides a mute button. But here's a little secret... mute the audio and instead play "The Boys are Back in Town" by Thin Lizzy *on repeat* . The song and video synch up perfectly for the *entire 1 hour and 28 minutes!* It's really cool. Try it.

    • @froste.9863
      @froste.9863 Před měsícem +1

      If there was only a volume button