I went to school for heavy equipment in Orange Park Florida and after graduation I got a job in a rock quarry I ran a 40 ton wheel loader but I've never run a 963 Track Loader bet it's fun
Nice video, operator is easy on Loader. I have a 963B my operators Love it. I still perfur my 953 for most jobs. I have Arthritis and it's hard for me to get on and off the 963B. People don't never get OLD.
I use to play inside this Tonkya truck being loaded ! 😅 Only field truck use heavy duty Stuff here bro ! Real Mans Work ! 1981 till late 90s ! Real Construction ! Facts ! 😂😂😂😂😊 8:31 😊
Never ran the K series loader just the B or C. I love and miss doing this but the body not up to it and if I could find a job that pays what I'm making now I'd say to hell with the body pains and get back into it.
Don't think this guy knows how to use the 4in1 which reduces cycle time and reduces wear on the dump link by not oscillating the bucket back and forth to shake material out and also not contact the dumper skip
You still have to oscillate it back and forth even when you open the bucket because the dirt always sticks to the back of the bucket.Its not really any faster.I've been doing that shit every day
Makes for perfect clean up too, used to drive a 1961 International Drott, 4 in1 bucket was a multi purpose piece of kit, shovel , clamshell, bulldozer and grader, all American of coarse but most good plant is....the arms were weak though, and many had to be welded up around main tipping lever brackets, but overall, they were great for the time and many still in use today...
А почему после погрузки тракторист ковшом в кузове не прижимает загруженный грунт что бы при транспортировки не сыпался из кузова?для техники безопасности,
Indeed!!..he has a lot to learn about running that loader…I bet he burns gobs of fuel every day compared to other operators…pushing way past where he should to load the bucket…then he has to travel back from the over travel of loading so it slows down cycle times…spinning his tracks needlessly…packing the dirt in the bucket making it hard to dump out…that was painful to watch…technique is everything!!..he could handle the machine he just had poor technique…
Back up alarms are the first thing that i rip out of any machine i work with.I can't stand listening to that sound for 10 hours!I watch behind me when I'm reversing instead relying on some annoying sound and someone behind me that might not hear it from his hearing protection or just being distracted by something else.Say whatever you want but machines that i work with have no backup alarms and im going to keep it that way for as long as I live
Obsolete machine. Trackloaders where replaced years ago when HYD excavator was invented. To costly to operate. When undercarriages weren't so expensive not as bad
This 963 would be my dream machine. If I could have one machine this exact one would be it. Love the track loader.
These are such awesome machines. It always amazes me how much material they can push.
Nice 45 degrees positioning of the artic trucks, makes the loading so much quicker.
I went to school for heavy equipment in Orange Park Florida and after graduation I got a job in a rock quarry I ran a 40 ton wheel loader but I've never run a 963 Track Loader bet it's fun
I done alot of brush clearing in my early 20s with a 963, they are amazing machines
Wow, My best friend, Thank you for your hard work in making the video. I enjoyed the good video. Have a happy day.
Cat 933G was a great Traxcavator as well.
Nice video, operator is easy on Loader. I have a 963B my operators Love it. I still perfur my 953 for most jobs. I have Arthritis and it's hard for me to get on and off the 963B. People don't never get OLD.
This cat 963k skid loader is nice to handle and it can go along with cat articulated dump trucks.
Awesome work, getting the job done. :)
Sounds like the grease worms are hungry
tracked loaders are more powerful than the wheeled ones.
Nice tool, had a komatsu 41s years ago good little machine
My kind of video, loving all the different angles to keep it interesting 👍🏻
I use to play inside this Tonkya truck being loaded ! 😅 Only field truck use heavy duty Stuff here bro ! Real Mans Work ! 1981 till late 90s ! Real Construction ! Facts ! 😂😂😂😂😊 8:31 😊
Never ran the K series loader just the B or C. I love and miss doing this but the body not up to it and if I could find a job that pays what I'm making now I'd say to hell with the body pains and get back into it.
Got some LGP Tracks on that thing. I have a 973 and i have the 22" pads which were classified as LGP.
When the bucket is full, why keep pushing?
To make a pile,so he can fill it easier
Achei exelente a caçamba deste trator trabalha mais rapido gostei
Good work
Superb operator . CAT machines are brilliant
Its the best construction machine ever
Great video , but would have been nice to see some work done cleaning up with 4 in 1
Good versatile machine
Bad ass machine right there
Excellent video 👌
Excellent job 👌
Don't think this guy knows how to use the 4in1 which reduces cycle time and reduces wear on the dump link by not oscillating the bucket back and forth to shake material out and also not contact the dumper skip
I've only been on a Track loader a few times just doing some grading. Never got to use the 4in1 bucket. Are the really that much faster when loading?
You still have to oscillate it back and forth even when you open the bucket because the dirt always sticks to the back of the bucket.Its not really any faster.I've been doing that shit every day
Makes for perfect clean up too, used to drive a 1961 International Drott, 4 in1 bucket was a multi purpose piece of kit, shovel , clamshell, bulldozer and grader, all American of coarse but most good plant is....the arms were weak though, and many had to be welded up around main tipping lever brackets, but overall, they were great for the time and many still in use today...
Great video as always
Wish I could see the end of the jod. Great video
I tell these kids slow it down a bit and make sure you keep it clean and tight
А почему после погрузки тракторист ковшом в кузове не прижимает загруженный грунт что бы при транспортировки не сыпался из кузова?для техники безопасности,
we used two of these rocking a hollower field
It looks like the bucket leveler isn't working right.
Good driver, full load every time adding to good productivity...!
He doesn't know how to operate a grease gun
Great video 🙂
Nice ♥️ work
The bucket was full 20' ago.
Indeed!!..he has a lot to learn about running that loader…I bet he burns gobs of fuel every day compared to other operators…pushing way past where he should to load the bucket…then he has to travel back from the over travel of loading so it slows down cycle times…spinning his tracks needlessly…packing the dirt in the bucket making it hard to dump out…that was painful to watch…technique is everything!!..he could handle the machine he just had poor technique…
Nice machine
Cat👍❤️
How much is the fuel consumption roughly?
Maybe the 4in1 doesn't work?
Like canal Rodrigo da Retroescavadeira. 🇧🇷🚜🤝👉👍
Angel 3872
Grease it up
The site looks ex railway..very flat and could have been a station ??
Powerful machine
Dead ends the Transmission !!!!!!!!!!!!!!
If he's got a 4 in1 why isn't he opening it on the dump cycle save bouncing off the body
I was wondering that too.
Try doing that for a day and you'll see for yourself why
Oi 👍👍👍💪
من الجزائر كيف استطيع ايصال هذا الجرار الى الجزائر عندنا السعر غالي ما يكنات القط
I like
What capacity is that bucket? Thanks.
2.5 cy
3m3
😀😀
2:28 did he run over a dog?
Какой специалист научиил его работать на второй передаче, когда можно на первой.
Полагаю, там оператор вообще не выберает передач, а лишь управляет джойстиками.
Передачи переключаются автоматически
@@user-jr8lf6pl2m Возможно,интересный алгоритм работы коробки.
Greas the trackloader
I’m surprised they are running without back up alarms seems pretty dangerous
They do have them, maybe you should have your hearing checked out?
There is a back up alarm. You can clearly hear it.
Clearly.
Back up alarms are the first thing that i rip out of any machine i work with.I can't stand listening to that sound for 10 hours!I watch behind me when I'm reversing instead relying on some annoying sound and someone behind me that might not hear it from his hearing protection or just being distracted by something else.Say whatever you want but machines that i work with have no backup alarms and im going to keep it that way for as long as I live
Do whatever you want lol where I live it’s mandatory tho
Wide pads on that vs what is standards. Bet it stands up better
How so ?
Grease the damn bucket !!! 🤦🏼♂️
It’s not a grease issue, it’s the hydraulics struggling with the oversize bucket at full height.
WAY TOO MUCH TRACK WEAR ! And NO GREASE ! GUN ! EAQAULS A ! LAZY ! LOUSY ! OPERATOR !!
Bit off level !!! Lol
Obsolete machine. Trackloaders where replaced years ago when HYD excavator was invented. To costly to operate. When undercarriages weren't so expensive not as bad
Nice content ♥
Good work
Nice machine