2000 Yamaha YZF-R1 Engine Rebuild - Part 21

Clutch re-installation. This requires an entire video segment. I'm simply re-installing my original OEM clutch - it was working great before the motor rebuild, so no reason to replace anything. Getting it back on can be a little tricky.
Next Video: • 2000 Yamaha YZF-R1 Eng...
Previous Video:

[@staffordgrant6722]

This guy is awesome all his videos together helped me to rebuild my 2002 R1 motor thus fair thank you for the help

[@repomannv]

My advice is take it to your local authorized yamaha mechnanic.

[@chuckibrd186]

7:30 = gangster ....the 2 line up !

[@Youngsoldier93]

always good knowing how to fix your bike/car. save a lot of money lol

[@user-do4wb4ku9i]

Any help i saw the diagram, i bought a new clutch kit, i put it in with the wright order and the clutch did not full engage ,i put 1st gear and when i allmost left complete the clutch it starts to move,any help please ... Hellow from Greece😎

[@speedracer7763]

Thanks I asked around and everyone say the small clutch has to be in there

[@therider3939]

Can you show me where is the thermostat please on that bike and how to change the cooler liquid maybe you can do a vid on that i cant find one on you tube

[@powerofone1645]

Don't the clutch plates have an outside facing and an inside facing side? Great vid by the way. Gives me the courage to tackle my 1999 R1.

[@that_guy1267]

I wonder if the clutch would be the same for R6 2000

[@armenvegas]

Did you stagger the outermost friction plate?

[@wrestler950zoey]

Did you use a torque wrench for the clutch pressure plate?

[@ojedaracing]

Why no wire lock reinstalled?

[@amsterdamrico]

The plates of my r1 1998 have a sharp edge and and smooth one on the other.Dus it matter witch side you install them?

[@backVlogger]

i did that but now my clutch doesn't fully dissengage. What is wrong?

[@stevenscott3971]

i took my plates out to check them put back in and now clutch wont work

[@ezrabunnell3602]

where are the clutch springs?? i took my 01 down and it doesnt have anything but that doaphram spring. and but my 03 does have springs.

[@mismatchuk7431]

not sure about oil on the clutch plates i thought the r1 was a dry clutch or am i wrong ?

[@speedracer7763]

Can you put the clutches back together without the small plate and inner springs I think that’s what they are called

[@alexjones3200]

What kind of oil did you use to re oil the disks?

[@K9_199]

did you have two piece rings on at