Video není dostupné.
Omlouváme se.

Yakima RidgeLine Towers Installation

Sdílet
Vložit
  • čas přidán 13. 06. 2017
  • Take sleek to a new level - the ingenious RidgeLine Towers integrate with flush-mount factory side rails so you can build a real rack that carries more. Strong and versatile, they attach easily and have a sleek design that aligns with your vehicle’s aerodynamic attitude.
    Combine with RidgeClips & any Yakima crossbar to complete your roof rack system.
    Learn more here: www.yakima.com/ridgeline-towe...

Komentáře • 9

  • @thevoyageur2152
    @thevoyageur2152 Před 7 lety

    Worked great guys thanks for the video instructions!!

  • @rhianonallen2947
    @rhianonallen2947 Před rokem

    Now if you have any tips for loosening the clips to make adjustments without having them fall completely off, that would be appreciated.

  • @johnmichl2648
    @johnmichl2648 Před 3 lety

    Like Maddy, I'm not getting the gas cap sound either. I've actually twisted the hex driver and thought it was about to break.

  • @Maxfli82
    @Maxfli82 Před 6 lety

    Thanks. Thinking of buying this system. Question: can you place the crossbars anywhere along the side rails as long as they are 27” apart or is there a set mounting point for them. I have a 2016 Kia Sedona

  • @maddyanderson7137
    @maddyanderson7137 Před 3 lety

    My bar adapters aren’t making the gas cap sound?

  • @christybrennand6710
    @christybrennand6710 Před 3 lety +3

    The background music is way too loud.

  • @IPv6Freely
    @IPv6Freely Před 5 lety

    These don't fit my car even though I bought the correct parts.

    • @YakimaRacksOfficial
      @YakimaRacksOfficial  Před 5 lety

      Hi chris,
      Please reach out to our support team here yakimasupport.zendesk.com/hc/en-us/requests/new?ticket_form_id=385987

  • @brentlestage9633
    @brentlestage9633 Před rokem

    There are some major inconsistencies with this video and the product manual that came with the RidgeLine towers. First off, it’s a waste of time to get everything set, positioned, torqued and measured when it is later revealed that you will later need to remove the rack from the vehicle in order to install the rubber bottom seal strip (which btw you don’t actually need to do). Additionally, useful info worth mentioning that was not highlighted in either your video nor the product manual was that, if the towers are mounted too close to the inboard side of the vehicle’s rails, you will NEVER be able to mount the side covers. Time to make an updated, more detailed video, Yakima, as your product manual is also seriously lacking. 👎🏻