Excellent explain. My petrol consumption now 13 KMPL . After tuned according to your instruction the water coming through silencer. I will check now milage
I applied all the steps proferly but my Mehran 800 reduced from 18 to 10 something, a local mechanic said that u should adjust your air fuel mixture screw in start position of engine with 1500 rpm, after lettig the air fuel mixture screw fully tighed you should slowly unscrew until you get smoth engine sound without any vibration. Now what I do there is no leakage of Petrol and surprisingly no lagging in engine power even the adjustment of screw in any position, I am stugged the engine behaves normaly on any position of screw with more fuel consumption. The overall condition of my engine is 10/ 10.
Thank you very much. This vedio is very helpful to me for reducing black smoke and improving the tunning of my car...Maruti 800... Thank you..Great Job..
Sir, your knowledge is great and you explain it wonderfully, i own a maruti 800,1996 model same as yours and it has cold start problems like it starts and stops and after that needs a long cranking to start.
Once you pull the HT cable from the Coil then you will not get spark from it, especially from the wrong side(9:35), the sound of spark that you hear is not from the HT Cable but rather the Coil. Ideally you are to pull the other end or even the Cylinder one Plug and then check for spark. That said, Awesome video! Cheers!
Thanks man. Your engine sounds very very smooth. The tuning method you told was very very precise. Even the workshops do it just by getting a feel of the engine. Can you please do a video of the engine and exhaust sound.
Salaam Dear Aveem... I am from Pakistan, I just watched the video and learned alot... Here this car is Called Mehran, which I have too owned it... Its a 2007 and by God it burns alot of petrol i think not more than 10km/pl... So I for the perfect timing I have downloaded this video and going to do the same things as you shown... And will let you inform about the result.. Thanking you in advance lol...
@@Hrithik_Jayanth . Yes i did it and quite succeeded. But a minor missing after a KM run. Should i open the front screw a half rotaion more or else? Thanks for your reply
Thanks for helping out.regarding mileage Zen are known for bad mileage.but anything above 17 kmpl is satisfactory.will try out the fuel injector cleaner soon.
Ok Dear i want to ask 1 thing here, why would we need to open front side screw? Company settings by default is that screw always meant to be fully tight. Why you recommend to open it 1.5 round?
how can you get spark when engine is not running and just by moving the distributor....and how on earth a distributor can produce a spark...what is ignition coil there for then....best way to to adjust the ignition timing is to simply use a timing gun..thanks
the mechanism of producing spark is, if there is a high voltage (inside the capacitor or condenser or coil) which is connected to a small gap (like a spark plug), then sparks start flying off from one end to another. If the key is turned on, then the high voltage is generated and so, it should work. Do not confuse a car with a bike because in a car, the ignition system is controlled by a battery whereas in the bike, it is controlled with a dynamo. The distributor is a rotating switch. As the engine rotates, the distributor rotates and makes contact with one spark plug wire to send spark into that spark plug. Then it rotates some more and transfers the spark into the next spark plug. In my spark plug tuning video, I create a second spark gap between the fat wire and the body of the car so that I can see the spark for myself. You might be wondering how spark is generated if the positive side of the fat cable is unplugged. But the thin negative wire connecting the condenser to the distributor is still connected. So, when I bring the fat cable to the body, the circuit becomes complete. At this moment, if I align the distributor perfectly, only then the switch is turned on and I can see the spark. Hence, I get the perfect timing. And please don't tell me that timing gun is better. That is non sense. If you are tuning the distributor, you can exactly pinpoint the location of spark sound and accurately align the distributor. If you use a timing gun, then the light generated will have an inherent delay. So, that is an inaccuracy. And the light will not come for only a microsecond for the timing gun to be pinpoint accurate. The gun will remain lit for a range of time so the error in adjustment could be a couple of degrees. And spotting with gun is time consuming and requires expertise. But everyone can hear the sound of spark. I hope this clarifies your doubt.
Nice information for max km /liter.Especially ,the the current distribution unit ,and time setting by the marking(yellow) on the shaft(?).Really nice presentation!👌👌👌..👍.
Aveem I am having frequent problem of overflow if the car sits for 2 days. And I see continuous supply of petrol in the small butterfly even in ignition off condition. So what is the problem with this car?? Pls reply.
Hello Aveem, I am glad that you are helping maruti owners with your best, i am thankful for that. I was wandering if i am able to install a tachometer (rpm) in my 1998 model 800? Please suggest any ideas or any video related to this if possible. Thanks.
Hey. I have to buy a tacho in order to make the video. I thought no one would be interested in it. But since you asked, I will make it. But it will take some time.
Thanks brother, I have seen custom tachometers in alto and some other vehicles over youtube but i want one for my 800 that may work perfectly and accurately. I will be waiting, Thanks for the quick response.
Wow. Quite detailed video on tuning carburettors. And the distributor thing I didn't understand. Could you make a dedicated and more detailed video on it. ?
Hi bro, Isnt 4 anticlockwise rotation too rich for a maruti zen.I have this doubt because the jet sizes are different.So isnt the same tuning from an 800 redults in rich mixture in the zen.i have read from some of the tbhp sites that the factory setting for a zen is 2.5 rotations only.Pls carify
Thanks for your video. I have a doubt, in my car oil and carbon depositing on spark plugs, it re deposits even after cleaning within three days. What does it mean ? Plz guide
hii brother I have 1998 car and I recently changed coolent & it turns black in colour. so tell me what is the problem. what is symptoms of back compression. I tried your settings but not getting millage. so what can I do
Consider three conditions that I'm facing: 1) car doesn't turn off at Idle. 2) But it starts missing while accelerating and turns off even it has reached its optimum temperature. 3) After this setting I'm getting a mileage of 15kmpl To over come this problem I've increased the idle and quarter a turn of fuel intake. Still the response is not satisfactory. What to do? Reply soon.
hi. thanks fo the video. In between i would like to ask one thing. In the video you remove the distributor cover and put the vehicle in 4th gear and pull to see the marking of belt. . But before that u rotate a thing inside the distributor to opposite direction. But closing the distributor cover is not shown, or in which position it should be kept before closing disrtributor cover. thanks
You can put the car in 4th gear and remove distributor cover or vice versa. Not so important. But you should not rotate the center piece with your hand. You simply push or pull the car until it roughly points in the direction I have shown you. Then push or pull further until you see a marking on the flywheel and then align it with your indicator. The centerpiece at this stage will roughly still be in the same direction. Now, put the distributor cover back on and complete rest of process.
i like your video great information, like IIT people can give the information i used your technic in maruti in zen the pickup and mileage very top improvement yar., Hat off for your video
Hi Bro, My maruti 800, 1999 model is giving only 4kms per liter of petrol what my be the exact problem, no petrol leakage found, let me know if its leak where to find because of low milleage'
Mai air fuel mixture screws jitna tight krlo ya loose krlo engine mai koi change ni ata. Our sparts plugs kholo to us pr petrol hota hai.. ye kya masla hosakta hai.
Walekum assalam bhai.. In cold starting does you pull choke or it is normally starting? My 800 carb fuel screw was in full tight condition.. Does it effect in mileage?
Hi bhai i bought one maruti 800 it's 2003 model euro 1 & i have not done any thing yet, the issue is it's doing missing after a mile the race is not working, should i turn it up like you showed in the video or there's more to do.
What is the flywheel marking number please reply sir. Iam waiting for your reply. I finished carborater tuning.but I confused fly wheel marking T or 1 more markings on flywheel topside.
Should we fill the fuel injector bottle completely or is there any instruction for Lt/ml. Plz let me know? Asveen. And thanks for the video once again.
Hello, Thankyou for the helpful information. I am in Kenya, I drive a peugeot 305GR. I am having trouble with cold and warm starts and I'd like to tune it. Well this method work on it or how should I go about it please
I think the mixture is lean so it is lacking power or engine needs advance firing which can be adjusted through distributor. Best to use tachometer while tuning. It has to be kept at optimum RPM.
My 97 model maruti 800 In morning at 6.00AM if we starts it is vibrating and slowly increasing the rpm. After few minutes it is running and starting normal. What to do to solve this? But once it is heated up it is running normally. The whole day in starting no vibration and starting and running very normal.
adjust idle rpm, check ignition wires attached to spark plug..if needed replace them along with new spark plugs...clean point set condenser and distributor cap.
To my mind you are adjusting mixture screw on assumption. It does not take into account the need of the optimum efficiency & power. There is other method to adjust the mixture while engine is running hot.
Dear aveem you made a mistake that you should remove the high tension spark lead from the distributor center point end side not from ignition coil end side for spark timing adjustment besides the fly wheel marking not always means that your engines piston #1 is on TDC Compression stroke it needs verification by removing the tapped cover as well as it can be at TDC induction stroke as well their are always two possibilities and their are too many other factors as well that needs to be understood as well in order to take a mileage of 25km/ litre of petrol
Some of the other factors are wheel bearings Tyre pressure oil type used air filter clogging engine head and valves must be zero sized gear oil cooling system and fuel quality and many more factors
Yes one of the pipes from vaccum was discconected.also the intake rubber pipe from the carburetor for Ac is blocked.there is no floe of petrol when Ac was switched on
the rubber pipe is for air. It is not for petrol. So you wont see any petrol flowing at all. Just reconnect those pipes and see if it works. If not i can guide you further. I have sent you my mail id in one of your comments
Thanks bro ur tuning helped.getting good mileage of 16+ on highways in speeds at 80 kmph.but as for the adjustment of screws,I'm running on 3 rotations back mixture screw and the front screw I have adjusted to 1.25 rotations as per the smell.is this OK?
It should be 4 rotations for the back mixture screw. The front screw is OK. If you are satisfied with the result, it is OK.You will get 18kmpl on highways at the speed of 80 with full load with AC if there is no fault. For the ultimate accuracy in tuning, open one of your spark plug and see whether the tip is white of pinkish brown or black. It should be light pink to pinkish brown. Then you know that you have the perfect mixture. If it is black, tighten the back screw half rotation. If the spark plug is white, loosen the back screw half rotation. That is the final step.
hello sir thanks for sharing ur experience with other people i just wanted to ask 2 things 1.best position for ideal and how to judge it 2.how to increase pick up of maruti 800 to max.
Ashfaq today when I started my car it's lacked accelerator response but after warm up water started falling from muffler then some black smoke came then engine started vibrating and went off now it's not starting. Other details I have send u mail yesterday Subject "Kind Attention Sir ".
dear aveem i showing ur show and i also trying to my 800 car but i can't found this type of mileage found; what is the reason of this ???? help me ! my mileage status approx 12 to 13 kmpl
Excellent explain. My petrol consumption now 13 KMPL . After tuned according to your instruction the water coming through silencer. I will check now milage
Now what is cars milage 🤔
Results ??
I applied all the steps proferly but my Mehran 800 reduced from 18 to 10 something, a local mechanic said that u should adjust your air fuel mixture screw in start position of engine with 1500 rpm, after lettig the air fuel mixture screw fully tighed you should slowly unscrew until you get smoth engine sound without any vibration. Now what I do there is no leakage of Petrol and surprisingly no lagging in engine power even the adjustment of screw in any position, I am stugged the engine behaves normaly on any position of screw with more fuel consumption. The overall condition of my engine is 10/ 10.
Thank you very much. This vedio is very helpful to me for reducing black smoke and improving the tunning of my car...Maruti 800...
Thank you..Great Job..
Sir, your knowledge is great and you explain it wonderfully, i own a maruti 800,1996 model same as yours and it has cold start problems like it starts and stops and after that needs a long cranking to start.
Thank you Aveem, this video helped me all the way over in New Zealand!
You'll have Maruti 800 in new Zealand
just great....thanks bro....you r helping maruti 800 owners so much.....thanks a thousand times bro....!!!!!
Once you pull the HT cable from the Coil then you will not get spark from it, especially from the wrong side(9:35), the sound of spark that you hear is not from the HT Cable but rather the Coil. Ideally you are to pull the other end or even the Cylinder one Plug and then check for spark. That said, Awesome video! Cheers!
Thanks man. Your engine sounds very very smooth. The tuning method you told was very very precise. Even the workshops do it just by getting a feel of the engine. Can you please do a video of the engine and exhaust sound.
My maruti / fx give 10 km / liter
@@bhutto1000my own suzuki fx is doing only 7-8 km, how do i tune it.?
Beautifully explained...!!! Cool, calm and patient...!!! Keep it up...
YOUR EXPLANATION IS VERY SIMPLE AND EASY TO UNDERSTAND. SURELY I WILL FOLLOW YOUR INSTRUCTIONS TRY TO TUNE MY MARUTI 800
THANK YOU
REGARDS
Salaam Dear Aveem... I am from Pakistan, I just watched the video and learned alot... Here this car is Called Mehran, which I have too owned it... Its a 2007 and by God it burns alot of petrol i think not more than 10km/pl... So I for the perfect timing I have downloaded this video and going to do the same things as you shown... And will let you inform about the result.. Thanking you in advance lol...
Please let us know about the success
@@Hrithik_Jayanth . Yes i did it and quite succeeded. But a minor missing after a KM run. Should i open the front screw a half rotaion more or else? Thanks for your reply
In addition I have a question, Ur car, I seen in video, has magnet instead of point. Is it have effect on fuel consumption or else?
In addition I have a question, Ur car, I seen in video, has magnet instead of point. Is it have effect on fuel consumption or else?
@@asadkhan_tv what mileage u got ?
U explain so calmly...
Thanks for helping out.regarding mileage Zen are known for bad mileage.but anything above 17 kmpl is satisfactory.will try out the fuel injector cleaner soon.
Great you are presenting like a teacher .
Ok Dear i want to ask 1 thing here, why would we need to open front side screw? Company settings by default is that screw always meant to be fully tight. Why you recommend to open it 1.5 round?
suzuki alto vxr 1000cc k lea kitny scrwe untied krny ha idle k ?
WOW ...... it's great instructions ...... I update my vehicle as well ...... Thanks buddy ...... keep it up ......
how can you get spark when engine is not running and just by moving the distributor....and how on earth a distributor can produce a spark...what is ignition coil there for then....best way to to adjust the ignition timing is to simply use a timing gun..thanks
the mechanism of producing spark is, if there is a high voltage (inside the capacitor or condenser or coil) which is connected to a small gap (like a spark plug), then sparks start flying off from one end to another. If the key is turned on, then the high voltage is generated and so, it should work. Do not confuse a car with a bike because in a car, the ignition system is controlled by a battery whereas in the bike, it is controlled with a dynamo. The distributor is a rotating switch. As the engine rotates, the distributor rotates and makes contact with one spark plug wire to send spark into that spark plug. Then it rotates some more and transfers the spark into the next spark plug. In my spark plug tuning video, I create a second spark gap between the fat wire and the body of the car so that I can see the spark for myself. You might be wondering how spark is generated if the positive side of the fat cable is unplugged. But the thin negative wire connecting the condenser to the distributor is still connected. So, when I bring the fat cable to the body, the circuit becomes complete. At this moment, if I align the distributor perfectly, only then the switch is turned on and I can see the spark. Hence, I get the perfect timing.
And please don't tell me that timing gun is better. That is non sense. If you are tuning the distributor, you can exactly pinpoint the location of spark sound and accurately align the distributor. If you use a timing gun, then the light generated will have an inherent delay. So, that is an inaccuracy. And the light will not come for only a microsecond for the timing gun to be pinpoint accurate. The gun will remain lit for a range of time so the error in adjustment could be a couple of degrees. And spotting with gun is time consuming and requires expertise. But everyone can hear the sound of spark. I hope this clarifies your doubt.
Wah boss today i learn new tecnique. Every time i dissassemble plug wire and u tell that unplug main wire i will try this .....
Thank you , it's really helpful to me
U videos inspire me . I want to buy a 1994 Maruti 800. Are parts still available for this old car. How long will carb cars b allowed in roads
Nice information for max km /liter.Especially ,the the current distribution unit ,and time setting by the marking(yellow) on the shaft(?).Really nice presentation!👌👌👌..👍.
Aveem I am having frequent problem of overflow if the car sits for 2 days. And I see continuous supply of petrol in the small butterfly even in ignition off condition. So what is the problem with this car?? Pls reply.
Hello Aveem, I am glad that you are helping maruti owners with your best, i am thankful for that. I was wandering if i am able to install a tachometer (rpm) in my 1998 model 800? Please suggest any ideas or any video related to this if possible. Thanks.
Hey. I have to buy a tacho in order to make the video. I thought no one would be interested in it. But since you asked, I will make it. But it will take some time.
Thanks brother, I have seen custom tachometers in alto and some other vehicles over youtube but i want one for my 800 that may work perfectly and accurately. I will be waiting, Thanks for the quick response.
Wow. Quite detailed video on tuning carburettors. And the distributor thing I didn't understand. Could you make a dedicated and more detailed video on it. ?
i want to make my car sound like muscle car but in cheap price how can i do it
Your explanation is so wonderful Mashallah. Plz tell me what kind of jet in front of carburetor which u open 1 and half.
Hi bro,
Isnt 4 anticlockwise rotation too rich for a maruti zen.I have this doubt because the jet sizes are different.So isnt the same tuning from an 800 redults in rich mixture in the zen.i have read from some of the tbhp sites that the factory setting for a zen is 2.5 rotations only.Pls carify
hats off bro. how simple the explanation. keep it up!
Thanks for your video.
I have a doubt, in my car oil and carbon depositing on spark plugs, it re deposits even after cleaning within three days. What does it mean ? Plz guide
You should be doing more videos, if possible, on injector cars. Very smart procedure. Appreciate it.
hii brother I have 1998 car and I recently changed coolent & it turns black in colour. so tell me what is the problem. what is symptoms of back compression. I tried your settings but not getting millage. so what can I do
Just a year ago, you had brown bumpers and grill. What happened to those?
Can I use this setting in zen carbonator ? Pls tell me .
Brilliant pieces of great advises! JazakALLAH!
Bro you can use timing gun to keep timing mark perfectly . Instead why we should put 4th gear and push the car.
Thank you so much.Your video has worked perfectly on my maruti.The video was very helpful and it works well.
What about the mileage now..? how much you are getting after this ?
Consider three conditions that I'm facing:
1) car doesn't turn off at Idle.
2) But it starts missing while accelerating and turns off even it has reached its optimum temperature.
3) After this setting I'm getting a mileage of 15kmpl
To over come this problem I've increased the idle and quarter a turn of fuel intake. Still the response is not satisfactory. What to do? Reply soon.
hi. thanks fo the video. In between i would like to ask one thing. In the video you remove the distributor cover and put the vehicle in 4th gear and pull to see the marking of belt. . But before that u rotate a thing inside the distributor to opposite direction. But closing the distributor cover is not shown, or in which position it should be kept before closing disrtributor cover.
thanks
You can put the car in 4th gear and remove distributor cover or vice versa. Not so important. But you should not rotate the center piece with your hand. You simply push or pull the car until it roughly points in the direction I have shown you. Then push or pull further until you see a marking on the flywheel and then align it with your indicator. The centerpiece at this stage will roughly still be in the same direction. Now, put the distributor cover back on and complete rest of process.
i like your video great information, like IIT people can give the information i used your technic in maruti in zen the pickup and mileage very top improvement yar., Hat off for your video
Hi Bro, My maruti 800, 1999 model is giving only 4kms per liter of petrol what my be the exact problem, no petrol leakage found, let me know if its leak where to find because of low milleage'
What is the air fuel mixture screw turns for zen carburettor
sir i have a another question that ..can we add front door speakers in maruti 800. if we can add so i wan't to know which speakers are best.
What to do my 800 carburettor model
Cold engine shakes
Great video, nice info!
Can u make a tutorial, how to fit brake booster in M800 carburettor!
Mai air fuel mixture screws jitna tight krlo ya loose krlo engine mai koi change ni ata. Our sparts plugs kholo to us pr petrol hota hai.. ye kya masla hosakta hai.
The carburettor thing works on Suzuki Maruti Zen 2000.thanks buddy
Walekum assalam bhai.. In cold starting does you pull choke or it is normally starting?
My 800 carb fuel screw was in full tight condition.. Does it effect in mileage?
Thank you for this very valuable information.
Tnx bro.. It's really helpful.. 🤩🤩🤩 Tnx from sri lanka
Hi bhai i bought one maruti 800 it's 2003 model euro 1 & i have not done any thing yet, the issue is it's doing missing after a mile the race is not working, should i turn it up like you showed in the video or there's more to do.
Dear asfaq bhai you explain very nicely..... keep it up
i can observe only two marks on my flywheel first is number 2 and after a long gap there's a yellow line/mark..on it
What is the flywheel marking number please reply sir. Iam waiting for your reply. I finished carborater tuning.but I confused fly wheel marking T or 1 more markings on flywheel topside.
after doing your method my 800 dropped milege from 10 km to 7 km per litre.. what is the reason?
King David explanation needed!
Me also getting this type problem and it come black smoke
your work is so good
Good explanation bro, I really enjoy it
Should we fill the fuel injector bottle completely or is there any instruction for Lt/ml. Plz let me know? Asveen.
And thanks for the video once again.
Hello, Thankyou for the helpful information. I am in Kenya, I drive a peugeot 305GR. I am having trouble with cold and warm starts and I'd like to tune it. Well this method work on it or how should I go about it please
hi thanks for this video.i have 1993 model 800 adjust mileage settings as you said.after settings done i feel little lacking in pickup.is it correct?
I think the mixture is lean so it is lacking power or engine needs advance firing which can be adjusted through distributor.
Best to use tachometer while tuning.
It has to be kept at optimum RPM.
Sir kindly tell how much nomber of firwheel set for good milige. and how much set RPM ?
Regarding the vapouriser the pipe from the purge section is disconnectrd to open.would u pls tell me where that pipe should be connected
My 97 model maruti 800 In morning at 6.00AM if we starts it is vibrating and slowly increasing the rpm. After few minutes it is running and starting normal. What to do to solve this? But once it is heated up it is running normally. The whole day in starting no vibration and starting and running very normal.
adjust idle rpm, check ignition wires attached to spark plug..if needed replace them along with new spark plugs...clean point set condenser and distributor cap.
Good video,sir after doing the work return pipe fuel coming little drop also petrol leaking at that place,plz reply
Is it compatible for zen carbatour
Bohoot bohoot dhanyavad
Super explained
Ager mai air adjust kerta hon 4 times loss aur patrol walla front jet full close tight rakhta hon tu kia ho ga plz answer me
Maruti 1000 esteem का भी सेटिंगsame होगा क्या
To my mind you are adjusting mixture screw on assumption.
It does not take into account the need of the optimum efficiency & power.
There is other method to adjust the mixture while engine is running hot.
LOL....... CHECK WIRE DIRECTION WHEN DISTBTR TIMING....... HOW SPARK COME OUT FROM DISTRIBUTER WHEN IT IS UNPLUGED FROM HT
Dear aveem you made a mistake that you should remove the high tension spark lead from the distributor center point end side not from ignition coil end side for spark timing adjustment besides the fly wheel marking not always means that your engines piston #1 is on TDC Compression stroke it needs verification by removing the tapped cover as well as it can be at TDC induction stroke as well their are always two possibilities and their are too many other factors as well that needs to be understood as well in order to take a mileage of 25km/ litre of petrol
Some of the other factors are wheel bearings Tyre pressure oil type used air filter clogging engine head and valves must be zero sized gear oil cooling system and fuel quality and many more factors
My car is not giving spark while rotating the distributor
My zen petrol carburetor model engine rpm is not increasing when a.c switches, due to this engine idling is changed
Same problem to my zen also
Tanks, very informative... please explain about pcv valve function in maruti 800 carburetor model..
Great information about Maruti 800 . Thank you
I have a Maruti 800 Carb Model 1999. Its Middle Spark Plug remains Black but rest of remains clear. What is the Problem?
Aveem, can you tell me what's a mileage maruti 800 carburetor engine gives in LPG, what is range in 14kg LPG tank...!
Ji maruti 800 carbrator or mpfi which best mileage and maintance
Very good bro.. did you do all this on cold carburator or did you warm the engine first?
Bhai apne cleaner ko tank mai dala kya usko petrol k sath use run karna hai
Yes one of the pipes from vaccum was discconected.also the intake rubber pipe from the carburetor for Ac is blocked.there is no floe of petrol when Ac was switched on
the rubber pipe is for air. It is not for petrol. So you wont see any petrol flowing at all. Just reconnect those pipes and see if it works. If not i can guide you further. I have sent you my mail id in one of your comments
i own my suzuki omni (india) white smoke shown in starting ,in running its disappear,when running misfiring coming how can i fix my problem
Bro what is the braking system in this car, is it all 4 drum or part disc brakes?
Which engine should be used in carb 800
Thanks bro ur tuning helped.getting good mileage of 16+ on highways in speeds at 80 kmph.but as for the adjustment of screws,I'm running on 3 rotations back mixture screw and the front screw I have adjusted to 1.25 rotations as per the smell.is this OK?
It should be 4 rotations for the back mixture screw. The front screw is OK. If you are satisfied with the result, it is OK.You will get 18kmpl on highways at the speed of 80 with full load with AC if there is no fault. For the ultimate accuracy in tuning, open one of your spark plug and see whether the tip is white of pinkish brown or black. It should be light pink to pinkish brown. Then you know that you have the perfect mixture. If it is black, tighten the back screw half rotation. If the spark plug is white, loosen the back screw half rotation. That is the final step.
I get 19-20kmpl at 80-85kmph.
Front screw is fully tightened and back screw is about 1 turn
Hloo sir is it a.c car . .is it effective or not if I put a.c in carb type car
hello sir thanks for sharing ur experience with other people i just wanted to ask 2 things
1.best position for ideal and how to judge it
2.how to increase pick up of maruti 800 to max.
will it work on iswara ?
Salam Alaikom about my car with 12 litre i can get 100 KM what do you think plz.
Bro please tell me that are you really getting 22 kmpl in your Maruti 800 carburetor version with the AC on. I am getting 10 kmpl .
Bhaii..bht sare log hain jo aapke video dekhte h..lekin English smjh nhi pate ..to bhai please hindi me bhi ye video bnao
Is this method working for maruthi Zen carb...Model?
800 car ki speedometer tej chalne mai kam speed show kar ra hai kya karna chahiy
Ashfaq today when I started my car it's lacked accelerator response but after warm up water started falling from muffler then some black smoke came then engine started vibrating and went off now it's not starting. Other details I have send u mail yesterday Subject "Kind Attention Sir ".
I have 98 model 800.my usage is city limits..give e tips to have a good milage.
My maruti 800 is consuming oil and white smoke is coming help to solve the problem.
Thank you for this instructions i am from Algeria
Petroll cleaner is totally safe or any problms
dear aveem i showing ur show and i also trying to my 800 car but i can't found this type of mileage found; what is the reason of this ???? help me ! my mileage status approx 12 to 13 kmpl
Do i need to tune the timing after tuning the carburetor