5:34 i'm using a gan SM, and i just got that and i'm considering switching XD the thing is an edge in my sm has 2 backward magnets glued in all because i'm an idiot, so i might switch EDIT: on like my 4th solve i got a pb 3 seconds below my last one this is my new main
The geometry of the scoop on the edge piece isn't the same as the YuLong, it's a true scoop instead of just a cylindrical curve. That means this cube moves better than the YuLong as the true scoop is a more advanced design.
No glue? *[Buys this cube and another potential cube that works better with magnets but it is without magnets in its stock mode (Things like The Valk3, Yuxin Little Magic, MF3RS2 or use the strongs magnets of the Mr.M to magnetize a normal MF3RS3 and fix the weak magnets of it), takes out all the magnets, makes magnetic another cube and uses this cube like the budget buddy :D]*
Ty in Ph its 325 which is like 9 and is cheap but i had doubts ty speed cube review Everytime I want to buy a new speedcube I check ur channel to see if its good coz ur accurate ty so much ur part of my cubing life
Hey Shawn! I have a question for you. So I just ordered this 3x3 from SpeedCubeShop and I got the pro set up service do you think that the pro set up will make that big of a difference or will it be almost the same. It would be nice if you could reply fast. Also this video was great as all of your videos are. Keep up the great work and have a nice day!
I have been happy with all of my set up puzzles. Having a cube out of the box that isn’t completely dry or overly tight or loose can make a big difference
1. I went over the cubes I used at the last competition video. My "mains' change almost daily. 2. My PBs are not something I ever care to share. I care so little about my times that I actually do not know what my PB single or average is for any timed solves.
I actually don't mind and like the noise and feedback. I guess I am ADD. It's obviously not so bad that people will toss out and get rid of the cube. And it is the cheapest magnetic out there. Gotta' take the good with the so called bad. It's only annoying if people have to listen to the noise or solve silent. Just put on some headphones and problem solved. Maybe the noise is a feature. Who knows?
You could have world record times with the Little Magic. If you are having problems with it. Clean it out, I would have tighter tensions to work on accuracy, and if you like, add magnets.
You’re like a rapper at 6:06
That frosted plastic texture on this looks like popcorn ceiling
I agree... it’s garbage
1:13 best grip texture
Mr. M:im the Best Budget Cube
Yuxin little Magic M:Hold my beer
Nova Cuber YJ Yulong v2 M: Hold my beer
Budget is 10 minus
TS Cubes wut
@@kanayuen3355 10 dollars or less
@@queensgambitdeclined it’s 8 bucks
5:34 i'm using a gan SM, and i just got that and i'm considering switching XD
the thing is an edge in my sm has 2 backward magnets glued in all because i'm an idiot, so i might switch
EDIT: on like my 4th solve i got a pb 3 seconds below my last one this is my new main
I like your turning style
It's so soothing
( Right adjective I think )
The geometry of the scoop on the edge piece isn't the same as the YuLong, it's a true scoop instead of just a cylindrical curve. That means this cube moves better than the YuLong as the true scoop is a more advanced design.
It is a ss gem but magnetic
TheBlackBeltCuber doesn't the gem have black plastic (with colors on it)?
Ben Baron yes, the mr m has primary internals instead
This is my main and its awesome!
No glue?
*[Buys this cube and another potential cube that works better with magnets but it is without magnets in its stock mode (Things like The Valk3, Yuxin Little Magic, MF3RS2 or use the strongs magnets of the Mr.M to magnetize a normal MF3RS3 and fix the weak magnets of it), takes out all the magnets, makes magnetic another cube and uses this cube like the budget buddy :D]*
i came here for review to ,, it costs NPR 1350 in Nepal ,,,After seeing this video i am ready to buy it
I didn't know you were color neutral. How did you learn to become color neutral?
I have a whole video on the transition and “5 tips” on the channel from about a year ago
Bram Ridders being color neutral isn't that hard you know
I am sub 20 now
2:22 super Cube for $10
Is it like mainworthy for a new cuber been cubing for only 3 months but Im really on a tight budget tho.
Of course. A sub-10 solver could use it
Ty in Ph its 325 which is like 9 and is cheap but i had doubts ty speed cube review Everytime I want to buy a new speedcube I check ur channel to see if its good coz ur accurate ty so much ur part of my cubing life
Hey Shawn! I have a question for you. So I just ordered this 3x3 from SpeedCubeShop and I got the pro set up service do you think that the pro set up will make that big of a difference or will it be almost the same. It would be nice if you could reply fast. Also this video was great as all of your videos are. Keep up the great work and have a nice day!
I have been happy with all of my set up puzzles. Having a cube out of the box that isn’t completely dry or overly tight or loose can make a big difference
Nice vid!! Can you make a vid on your PBs and mains? Thx!
1. I went over the cubes I used at the last competition video. My "mains' change almost daily.
2. My PBs are not something I ever care to share. I care so little about my times that I actually do not know what my PB single or average is for any timed solves.
SpeedCubeReview Ok thanks!
aweosme, i cant wait until i can try it
I actually don't mind and like the noise and feedback. I guess I am ADD. It's obviously not so bad that people will toss out and get rid of the cube. And it is the cheapest magnetic out there. Gotta' take the good with the so called bad. It's only annoying if people have to listen to the noise or solve silent. Just put on some headphones and problem solved. Maybe the noise is a feature. Who knows?
Are the magnets glued into place? The magnets seems like being glued despite of the presence of slots... somehow like a mass produced gts 2m?
I show them in the video. No glue
icic thx!
What should be my main
Thats my main
can you review a qiyi qimeng in your next video
Shawn Boucke I Just like The mr m and its my main i like all of your video JedcoopeR nayaracam
I subscribed
My bro challenged me to solve a 3x3 before you so i did. i paused the video
The Rubik's brand is the best cube on the market. Beat my PB of 2 minutes last year with it.
Amesh i can beat you easily boi
17.60 on the van air :p
*gan
Amesh 10.4 on the sm
MJBCuber 13.91 on MF3RS2M
Wow that's a long cube name
Does anyone know what magnet strenght is in mr m 3x3?
lol I have this cube xD
Cool I'M early! Great video BTW
What’s the speed like? And it also see,ed that the corner cutting was horrible, is it really?
It’s not horrible. No one should ever need over 45° corner cutting
SpeedCubeReview alright, what’s the speed like? Also can it do small cuts easily? Because that’s what I really need
Any modern cube can and like most modern cubes it’s too fast out of the box.
What is the strength of the magnets?
Arman Ahmed Rahmatullah really strong lol
Now I have yuxin little magic which actually sucks
You could have world record times with the Little Magic. If you are having problems with it. Clean it out, I would have tighter tensions to work on accuracy, and if you like, add magnets.
This or the YuXin 3x3?
Depends on what you like. Watch both reviews and see what interests you more
This or the MGC?
Check the MGC review I made
My MF3RS2 M just died today, do you think this would be a decent replacement or should I just go MF again?
Change up a bit
I think the Little Magic M could be good
How did it die?
Dropped it one too many time, I guess? One of the white core pieces on an edge actually snapped.
I would say qiyi thunderclap v1.
Could you help me to improve my tps
The big thing is going slow and reducing pauses. TPS will improves in time.
how much was that??
I got it from the shop linked in the description.
You can SEE THE CUBE DIPPPED IN GREASE! SHENGSHOU WHY!
It's not greasy at all. If anything it's too dry.
44 views 4 minutes since you uploaded...
which method do u use to solve the cube the fastest one
There is no fastest as you can get equal times with CFOP, Roux, and ZZ.
Please make a tutorial video on 2bld please
It’s the EXACT same as 3x3. You only do corners. czcams.com/play/PLL7KvA5mhPX0KwgSUZEYUKgjNJEBGyher.html