50 TO 60 DEGREES COOLER ENGINE OIL! ON OUR HARLEY DAVIDSON! ULTRACOOL!
Vložit
- čas přidán 30. 08. 2023
- Hello! In this video I'll show you how to keep your Harley Davidson from overheating and running cooler. Resulting in an enjoyable riding experience. Website is below.
Don't forget the exclusive discount code valid through August 2023.
Discount Code: Sturgis23
www.ultracoolfl.com
Enjoy the video and please like share and subscribe.
Subscribe for upcoming content.
Trask Performance:
Call Eric at 623-289-2026 from Trask Performance for all your Harley turbo questions. You can also click on the link below to contact Eric.
contacttraskperformance.phone...
2022 Harley Davidson Road Glide Special in Redline Red. Trask Performance Assassin Stage 2 Turbo Kit. Screamin Eagle 131 Stage 4 Kit. BST Carbon Fiber Twin Tek wheels.
2019 Harley Davidson Road Glide CVO in Mako Shark Fade with the Screamin Eagle 131 Stage 4 Kit.
Head light - Advanblack Attach Headlight
King tour pack - Advanblack
Liner for the King tour pack - Advanblack
Inner fairing - Advanblack
Carbon fiber front fender - Big Bear Choppers Performance
Carbon fiber dash - Hofman Designs
Carbon fiber rear fender - Hofman Designs
Carbon fiber wheels - BST Twintek
Tires - Dunlop American Elite
Chain drive kit, alloy art - bullet proof cycles
Swing arm - Trac Dynamics
Clutch - Evolution Industries
Compensator - Man-O-War
Rotors - Galfer rotors
Turn lights - Custom Dynamics
Cam chest kit - S&S 550 Kit
Turbo system - Trask Performance Assault Stage 2 Kit
Scramin Eagle 131 Stage 4 Kit
Transmission - Baker Drivetrain Grudge Box
#harleydavidson #bagger #baggernation #performancebagger #roadtrip #roadglidespecial #motovlog #motorcycle #motorcycle #vlog #vlogs #vlogger #tracdynamics #turbo #roadtrip #race #life #funny #roadtrip #goals #turbo #harleydavidson #horsepower #motorcycle #motorcycle #food #torque #race #carbonfiber
I bought this system, 3 years ago maybe 4. I live in the UP. They gave me a cover for the heat exchanger nice cover with magnets. They told me I might have trouble getting the temp up in cooler weather. I built a 114 twin cam and that's where this system was going. It's an ultra. I live about 21 miles from town. let's say 30 from work. With Harley's I always install a merlin temp gage that measure oil tank temp and head temp. Really head temp is engine temp it uses a head bolt for a probe. This way I can see the temp as I'm riding I did use the freeze frame data from the ecm too.
Any way I was dead wrong. When i got off the phone with them when I bought it I thought there is no way I'm going to need that cover. It was free. A harley that doesn't warm up enough this I gotta see.
I have been riding motorcycles all my life. Most of them Harley's all of them in Michigan's upper peninsula. I will tell you this system does what it says.
I even got a crown royal bag from my watering hole and cut up a 1 liter pop bottle to cut the air flow over the oil filter. I used a 6 inch bungi to hold the bottle on the filter.
On the hot side you can literally feel the motor cool down. When I see the temp coming up I start watching the led. when it comes on it doesn't take long and the temp is coming down.
When I bought it the guys told me "That's a lot for an oil cooler".
I told them I have over 10 grand in this motor it's cheap one time insurance. I am extremely happy with it's performance so far. There is no reason that it will not keep giving me great service.
I gave a high flow oil filter to the fella that bought a softail I built. That bike always ran hot. Carbed stroker. The filter did not solve the Issue but it did noticeably cool that bike down.
Wow! Thank you for sharing your experience! Thats great to hear!!!
Key thing he says in the first minute, basically the more power added to your bike, the more heat you will generate.
96ci, twin cam, Road King. Cooler and filter. Damn!! Gotta a couple 88's too...
Bought one several months ago and J.J. was awesome to communicate with. I got the unit in like 3 days after ordering. Crazy fast. Install took about 3 hours because I have the front faring so I had to take all that apart. Before I installed it, my stock 114 was hot when I parked it. I had no upgrades or anything and it got hot. I could smell the black paint baking on the engine after it was parked. Lot's of metal clicking when it cooled. Not anymore. Bike is significantly cooler! Very little clicking from the metal in the engine cooling and no smell. It made a real difference.. And I love the little blue light when it comes on. The Ultracool fan unit was worth every penny and more. I also installed the stock fan behind the oil cooler so I think both of these products are a must have for the M8.
That’s awesome to hear! I had a similar experience when I bought the Ultracool fan. I got about 10k miles on it and no issues with it.
I just saw a report on the oil filter, stating they free up 7 or so HP!
Cool vid! Will probably get the oil filter assembly. Thanks for the info!
Thank you!
I'm rock'n the XL Flow oil filter. Same filter just twice the size. Only sold by Cycle Solutions here in Florida. Ask for Chris.
I run it on my Glide, waiting for Bike Week to hit them up for my 3 Digit Fat Boy. 😂
Just a game changer. 2FD
SQUID
ET1(SS/SW/MTS) US Navy, Ret.
My buddy needed a ride-a-long to pick up his Road Glide after a Stage 2.8. So I picked up the XL for Killmonger (Fat Boy).
I'll be stopping by your tent during Daytona Bike Week. I need a solution for my XL Flow and the Ultra Cool install.
ET1(SS/SW/MTS) US Navy, Ret.
Keeping these engines cool is critical. Sounds like a great product. Ride safe and enjoy. 👊👍✌️
Yup. Agreed! Thanks!
Definitely grabbing one!
Awesome my Hermano.
I definitely need this!
No issues with mine. It’s been great.
Boss interview brother. Family business...salt of the earth.
I really F-up not driving down the road from the 120th in Milwaukee.
Appreciate it!
I have been using the UltraCooler and FLO filter on my 2012 SG since April, 2023 after some engine work. They work great! I will use these on every other Harley I get.
Happy to hear. Same here. I also have it on my Cvo build. Currently being built.
Running flo filters need to get the ultra cool setup for my turbo bike for sure great products
They make a difference. Especially, on high HP applications. Use code Sturgis23 for 10% off. If it doesn’t work just call JJ he’ll make it happen.
2022 Heritage. My oil runs around 225-230 on a 90* day running 75mph.
No need to spend 500.00
Thats awesome!
SOUNDS LOUD …BUT NECESSARY.
Mine hasn't kicked on yet. Haven't been stuck in gridlock with it, but so far it doesn't go above 200 degrees with the oil filter installed.
That’s great to hear! Mine doesn’t turn on unless I open the throttle up for a while.
Crazy, that thought passed my mind when I got caught in parade traffic Saturday.
Chestnuts roasted on an open fire. Not cool.
lol. Not at all
i have had mine on for about a month now with the filter and my oil temp has not gone over 205,,yet to kick the fan on
Very nice! Same here. It’s come on a few times. But not many after tuning it pretty hard.
Cómo podemos adquirir este equipo en México
Hola. Ordenalo en su website. Y lo manda por FEDex o UPS. Gracias por ver el video!
DK products has had this for years.
How much?
It’s about $500. But they’re website has the prices. Use code Sturgis23 for 10% off.
Oil needs to be at a certain temp to work properly. Too cool and your risking engine damage
Yea but this system turns on when temps get to the right temperature, so in winter time u wont ever see it turn on. It doesnt just stay on 24/7
What do you use to clean filter?
Break cleaner.
Harley states the normal oil temp should be 230 f. Why does everyone think it has to be 50-60 degrees cooler?. Oil needs to be up to operating oil to do it's job. If you think your oil is ruined from being hot, and it will get hot NORMALLY, sent it out Blackstone labs or some other company whose job it is test oil . You will be amazed how many outfits try to scare you into dumping perfectly good oil, to buy whatever snake oil they are selling. If reusable oil filters were such a good Idea, all the engine mfgrs would be using them. Do any of them use them?. Must be a reason. Police depts don't use anything more than factory oil coolers, and engine fin cooling fans. Why ? because thru real world testing they have found they do everything that's needed by the engine. They let their engines run thru an entire traffic stops, without all the fatal damage these venders say will happen if you don't use their modern marvels of technology. Feeling heat coming off a motorcycle will be annoying and damaging to the rider, than the engine. Running low on oil, or running the wrong type or weight oil will do more damage to your engine than heat will. ,,
Hello! Thank you very much for the info shared. Very good points. Thank you for commenting!
Harley Davidsons Seize all the time when they over heat.. Liquid cooled bikes do not so long as they have an electric fan that kicks in while they are idling.
So true…. Oil has to be hot to make French fries
For people with stage 4 kits and they live in hot areas u will benefit from this im in cali and i see 350 temps (m8) on hot day and you lose noticeable power when motor is above 300 being able keep temps down so you wont be as sluggish. If you go to twistys in any area in summer youll see temps climb and drop in power. If you ride your harley like a cruiser yea you dont need it but having a stage 4 kit with not extra cooling you will fuck it up especially if u commute far in hot summers. I know bunch guys that blew their motors because of heat. The fan isnt always running it only start running when it hits a certain temp, so in winter ull never see it turn on.
I can see cooler oil but I’m not buying into the mesh oil filter. If I was running a top fuel bike then maybe but not for an engine that goes for longevity. A recent testing just proved that a pleated fiber oil filter removes more trash for oily than mesh. Proper oil run at designed temps should flow through a pleated filter as per mfg results. My 2020 came with the redesigned oil pump and was not changed when the 131 kit was installed. If the extra lubrication of adding a turbo is needed then I get that. Always wanted a Trask turbo on my bike, sounds like a hoot.
If you use AMSOIL Signature 20/50 you won't need to spend $500 !
Thanks for the info.
please look for a German partner who imports the cooler 🙏👍🏻
Are you in Germany?
@@2147crew yes , last week in Las Vegas, but now back here in Germany
@@MrOdin68 got ya.
Jagg oil coolers are better
Awesome! I’ll need to look into them.
Why are they better?