I have built up two 10-22s. Kidd triggers in both, probably the most important item. One gun is mostly Kidd, it has a Volquartsen receiver I used before Kidd receiver was available but otherwise is mechanically all Kidd including the barrel. My other one is a Ruger receiver/Green Mountain Barrel but mechanically all Kidd. As others have said people shoot these and put away their other 10-22 builds.
I watched every video I could find on removing & replacing 10/22 bolts. Most don't even include the actual replacement but mention that it can be difficult. It definitely is difficult, and, for me, that was an understatement. I tried my best to keep the new Kidd bolt handle perpendicular to the bolt, but all I could do was get the new bolt stuck time after time. That was followed by maddening attempts to get it out in order to start over. After about 90 minutes of terribly frustrating repetitions of the process, without being able to tell what I was doing differently, the bolt fell into place without even being pushed. I learned nothing from this process -- i.e., I have no idea why the bolt was placed easily on the final try. I think it would be easy for Mr. Kidd to devise and include a little tool to keep the bolt handle retracted and perpendicular during installation of the Kidd bolt. From watching numerous videos, I can tell that even for experienced gunsmiths this task is tough, almost dreaded by some. For 10/22 owners without experience, it can be nearly impossible. For $110, that tool should be included. (I'm almost positive that they use such a device on the Ruger assembly line.)
Using a Kidd bolt in my build using a factory receiver, Volquartsen trigger internals, Whistlepig aluminum barrel, in a Hogue stock. Using a Centerpoint (walmart) red dot. The product with best fit and finish is easily the Kidd bolt. Keep up the good work over at Kidd!
do you guys have a drop in part for the ruger 10 22 that will lower the trigger pull from the stock 5 pounds to less than 1.5 pounds? I like sending aluminum cans sailing and a 5 pound trigger pull is too much. I need a lighter trigger pull that will allow me to pull the trigger faster without getting tired so I can put three or four cans in the air at the same time.
@@coolguyguns10xKIDD I've got the bolt and recoil buffer ordered today. I've already got the magazine latch plunger, charging handle, guide rod, and springs. I'm gonna be saving cash out of each paycheck and hopefully by Xmas I'll have the 2 stage trigger assembly and threaded receiver pins and my dream .22 will be completed! The stock and furniture is Samson B-Tm folding stock, the receiver and barrel is factory ruger, and the rest of the components are KIDD. THank you Mr Kidd for making such high quality 10/22 components. I really appreciate how quick you guys always reply back and you get all your products in my hands so quickly. Cheers Mr Kidd.. I hope you're living the good life because your product's reputation are flawless in the 10/22 world. Imo
I found you from another video and ordered a new barrel bolt and buffer for my sons. I can wait to get it all in for him he will be stoked
I have built up two 10-22s. Kidd triggers in both, probably the most important item. One gun is mostly Kidd, it has a Volquartsen receiver I used before Kidd receiver was available but otherwise is mechanically all Kidd including the barrel. My other one is a Ruger receiver/Green Mountain Barrel but mechanically all Kidd. As others have said people shoot these and put away their other 10-22 builds.
Just ordered one. Hoping it’s as nice & brings some life into my 10/22! Thanks
I watched every video I could find on removing & replacing 10/22 bolts. Most don't even include the actual replacement but mention that it can be difficult.
It definitely is difficult, and, for me, that was an understatement. I tried my best to keep the new Kidd bolt handle perpendicular to the bolt, but all I could do was get the new bolt stuck time after time. That was followed by maddening attempts to get it out in order to start over. After about 90 minutes of terribly frustrating repetitions of the process, without being able to tell what I was doing differently, the bolt fell into place without even being pushed. I learned nothing from this process -- i.e., I have no idea why the bolt was placed easily on the final try.
I think it would be easy for Mr. Kidd to devise and include a little tool to keep the bolt handle retracted and perpendicular during installation of the Kidd bolt. From watching numerous videos, I can tell that even for experienced gunsmiths this task is tough, almost dreaded by some. For 10/22 owners without experience, it can be nearly impossible. For $110, that tool should be included. (I'm almost positive that they use such a device on the Ruger assembly line.)
What happened was you leveled up
I cover the blade of a screwdriver with electric tape and I'll use that to assist with compressing the assembly evenly.
Using a Kidd bolt in my build using a factory receiver, Volquartsen trigger internals, Whistlepig aluminum barrel, in a Hogue stock. Using a Centerpoint (walmart) red dot. The product with best fit and finish is easily the Kidd bolt. Keep up the good work over at Kidd!
Hey how is that rifle holding up 5 years later?
Thank you.
thank you.
do you guys have a drop in part for the ruger 10 22 that will lower the trigger pull from the stock 5 pounds to less than 1.5 pounds? I like sending aluminum cans sailing and a 5 pound trigger pull is too much. I need a lighter trigger pull that will allow me to pull the trigger faster without getting tired so I can put three or four cans in the air at the same time.
Me likey!
was that a 17 mach2?case
I from Canada can I order a bolt from you
Try eBay, a lot of things are known to slip thru that way, or try I Run Guns, they can usually get anything legal from the States.
I bought a black one
Thank you
@@coolguyguns10xKIDD I've got the bolt and recoil buffer ordered today. I've already got the magazine latch plunger, charging handle, guide rod, and springs. I'm gonna be saving cash out of each paycheck and hopefully by Xmas I'll have the 2 stage trigger assembly and threaded receiver pins and my dream .22 will be completed! The stock and furniture is Samson B-Tm folding stock, the receiver and barrel is factory ruger, and the rest of the components are KIDD. THank you Mr Kidd for making such high quality 10/22 components. I really appreciate how quick you guys always reply back and you get all your products in my hands so quickly. Cheers Mr Kidd.. I hope you're living the good life because your product's reputation are flawless in the 10/22 world. Imo
I'd be ok paying $100 for a new bolt in a $130 rifle if it guaranteed to actually improved the accuracy.
$130 huh? Let me know where so I can buy a dozen