2021 Onwards | Honda DCT Reset (Instructional)

Sdílet
Vložit
  • čas přidán 10. 07. 2024
  • 2021 Onwards Honda DCT Reset
    If your DCT is shifting roughly or pulling away is a little "jumpy" ???, then try this procedure and in most cases, it will sort your Honda DCT gearbox out.
    Thank you for your support watching the exeter-rider channel
    ----------------------------------------------------------------
    #hondadct#hondadctreset#hondanc750x'dctgearboxreset#dctreset
    Please like my Facebook page - Exeter-Rider...
    (Instructional)
    Instagram (Still getting the hang of it) exeterrider3
    ----------------------------------------------------------------
    Enquiries email - exeterrider@hotmail.com
    ----------------------------------------------------------------
    Product links I use for filming and parts on my bike -
    Honda NC750x FOLDING mirrors I use amzn.to/3temPSd
    GoPro Hero 9 Action 5k Camera - amzn.to/2HFd8KF
    Great value intercoms at £40 each amzn.to/2V5e12J
    Honda NC750X Bar Riser's amzn.to/2MKMIWV
    Kaoko throttle lock amzn.to/2UK8q1F
    WD-40 chain wax amzn.to/34M3rkM
    USB charger amzn.to/2RFjRpX
    Castor wheel for turntable MK1 amzn.to/3e3mdrL
    Puig Touring Screen amzn.to/2B613uE
    Folding mirrors amzn.to/37zYlJV
    Drift Ghost X action helmet cam amzn.to/3fouI0R
    Helmet amzn.to/2Y1Nxks
    Go pro hero 8 amzn.to/2YCXBj0
    DJI mini drone amzn.to/2UJ2ZzZ
    #hondadctreset#dct#reset#hondanc750x#dctreset--------------------------------------------------------------
    2021 Onwards Honda DCT Reset
    The link to buy your ACF-50 is here
    The best option here for Spray gun-
    amzn.to/2xGgx6Q
    The link to buy your ACF-50 is here-----
    ACF-50 Motorcycle And Automotive All Metal Anti-Corrosion Spray 369ml
    amzn.to/2wcK8V5
    amzn.to/3cXxslD
    ---------------------------------------------------------------------------------------------------------------------------------
    Workshop Tools -
    2021 Onwards | Honda DCT Reset
    Battery optimiser 36.99 amzn.to/2Zh5Nq2
    Carb balancer £20.10 amzn.to/3g7ybVn
    Amazon socket set £55.99 amzn.to/3tdd5sb
    Granville 0173 80/90 5L Hypoid Epex Gear Oilamzn.to/2QXZAhX
    Engine oil nc and beemer amzn.to/3vfVOza
    Oil filter cap tool amzn.to/3tQyzLR
    Feeler gauges amzn.to/32P0UpQ
    Copper crush washer pack amzn.to/2PpWQJM
    funnel with nozzle amzn.to/2RS4H3t
    FOLDING MIRRORS amzn.to/3temPSd
    Silverline Spanner set amzn.to/33zV4Jk
    Long Reach magnet find - amzn.to/3tA5yDf
    Extensive Amazon socket set amzn.to/3o5JUFH
    2021 Onwards Honda DCT Reset
    #2022#2021#dctreset#dct#honda#motorcycle#nc750x#africatwindct
  • Auta a dopravní prostředky

Komentáře • 93

  • @exeterrider
    @exeterrider  Před 7 měsíci

    Please note the bike also has to be OFF the side stand as well when doing this.
    If you could "like" this video and Subscribe for more content like this I would really appreciate it Thanks

  • @jimsadler8704
    @jimsadler8704 Před 2 lety +4

    What an extremely useful slice of information for Honda owners with a DCT gearbox, and no doubt a money saver not having to go to a dealer. Well done, ER.

    • @exeterrider
      @exeterrider  Před 2 lety +1

      It works well too. Many haven't ever done this in years of owning there bike and it's like a new bike literally when they recalibrate there bikes.

  • @ray8328
    @ray8328 Před 2 lety +5

    I don’t have a DCT bike but I find this info very interesting and informative. Thanks.

    • @exeterrider
      @exeterrider  Před 2 lety +3

      I'm pleased about that Ray thanks for saying 👍

  • @marklevy9
    @marklevy9 Před 2 lety +7

    This is a really simple thing to do. I found the gear changes were a bit clunky especially on the downshift. Did the reset and it solved the problem instantly. So easy to do and literally takes less than 1 min from start to finish. Good tip for any dct bike.

  • @VStrom2019
    @VStrom2019 Před 2 lety +3

    Amazing, simple and easy but so helpful. Thank you 👍

  • @yeoie0257
    @yeoie0257 Před 2 lety

    I've just done this to my 21 model. Wow what a difference! Thank you for sharing this.

    • @exeterrider
      @exeterrider  Před 2 lety

      Yes it makes a huge difference. Thanks Yeoie👍🍻

  • @chrisgraham4340
    @chrisgraham4340 Před 2 lety

    Great vid. Followed the instructions on my 2021 Africa Twin DCT and worked a treat. Really does make a difference! 👍

    • @exeterrider
      @exeterrider  Před 2 lety

      Good news Chris, thanks for the feedback 🙏👍🍻

  • @pg41226
    @pg41226 Před 3 měsíci

    Very clear video! I do this reset every 2000km and after an oil change, but have to watch the video every time because I always forget the D D N D sequence 😂 It noticeably changes the driving experience of the dct. Only to be done with a hot engine

    • @exeterrider
      @exeterrider  Před 3 měsíci

      I also have to watch the video everytime I reset the DCT 😂Glad it helped you thanks

  • @mistseeker1975
    @mistseeker1975 Před 10 měsíci

    Thanks so much for this; my ncx had erratic starts and switched off at traffic lights sometimes. This seems to have helped.

    • @exeterrider
      @exeterrider  Před 10 měsíci

      Good news 👍it's like a new bike isn't it 👌👍😊

  • @robindalton1790
    @robindalton1790 Před 3 měsíci

    Very useful video, thank you for sharing with us and saving us time, money and worrying about the fault 😊

    • @exeterrider
      @exeterrider  Před 3 měsíci

      Glad it was helpful! My pleasure : )

  • @oldbirdonabike2493
    @oldbirdonabike2493 Před 2 lety +1

    Thank you so much for putting this up, I’ve got the 2021 model & have just gone over 4500 miles on it and am hoping this reset might cure the almost stall it occasionally does when pulling away. It fact it did cut out a couple of weeks ago pulling away from Bridge Motorcycles. I believe this may be more a ride by wire problem rather than the dct as I’ve never experienced anything remotely like this on my two previous dct’s. Anyway, I’ve reset it, had a quick blast up over Princetown and fingers crossed it’ll sort the problem out. Thank you

    • @exeterrider
      @exeterrider  Před 2 lety

      Hi, good to hear from you again Thankyou. Yes it will help that situation, but not cure it. I think it's the remap thats caused the issues coupled with tighter emissions control..... Damn euro5. Ride safe, hope to meet you sometime 👍🍻💯

  • @dmiky318
    @dmiky318 Před rokem

    Thank you for your video you helped me solve some problems with my bike thank you very much

    • @exeterrider
      @exeterrider  Před rokem

      Nice of you to send the feedback thanks 👍

  • @user-sw2lv3zp6o
    @user-sw2lv3zp6o Před 2 lety

    Interesting.

  • @FernandodeRibera
    @FernandodeRibera Před rokem

    Thank you very much. After following your procedure, my FORZA 750 (2021) 's DCT now runs smoothly without any problems. Regards from Spain

    • @exeterrider
      @exeterrider  Před rokem

      Great feedback, I'm really pleased, thanks Fernando👍🍻

    • @FernandodeRibera
      @FernandodeRibera Před rokem

      @@exeterrider A long, long, long time ago, over 35 years ago, I spent a summer learning English in the small town of Totnes, 30 miles south of Exeter. I have fond memories of it.

    • @exeterrider
      @exeterrider  Před rokem +1

      @@FernandodeRibera ahh yes, I'm working in totnes this week. Nice place 🍻

  • @ccooper8785
    @ccooper8785 Před 2 lety +3

    Just about to try this to cure the poor gear changing on my NC when I remembered that it is a manual and it is all down to my general advanced cackhandedness....

  • @dolphinride5157
    @dolphinride5157 Před 2 měsíci

    I would not know of this reset operation if not for this channel. There is no mention of it in the owners manual. Thank you for this information. I do wonder why Honda didn't put this into the manual since it seems quite important.

    • @exeterrider
      @exeterrider  Před 2 měsíci +1

      I guess it would make sense to them to keep it quiet so when you take your bike in for a oil service then they would do it and it would make it seem like that oil service worked miracles!

    • @francoschiavon655
      @francoschiavon655 Před 4 dny

      perche' non andresti piu' in officina honda

  • @Bykersam
    @Bykersam Před 2 lety +2

    L72 👍, nice informative share, alas I have a 2018 model but still interesting to watch. Would you do a video for earlier models and does it follow through with other DCT models like the AT? Stay blessed and safe on two wheels, your biker brother Traveller MIA 🇬🇧

    • @exeterrider
      @exeterrider  Před 2 lety +2

      czcams.com/video/STr8VI8DB50/video.html hi MIA, I have already made one for older models. Thanks for watching. Ride safe👍💯👌

    • @Bykersam
      @Bykersam Před 2 lety +1

      @@exeterrider cheers buddy I will watch it later for sure 👍👍

    • @quesadilla79
      @quesadilla79 Před rokem +1

      ​@@exeterriderthanx for this 🙏

    • @exeterrider
      @exeterrider  Před rokem +1

      @@quesadilla79 no worries mate

  • @arnaudvasquez7637
    @arnaudvasquez7637 Před 10 měsíci

    Thank you very much for this video. I've had it done by the dealer last year on an 2021 ATAS and it was great but now I've had issues again with my DCT and am considering doing it myself. Do you have any recommendations on how to deal with the "very long to boot up" main screen on the ATAS? Or should I forget about it and just concentrate on the basic lower screen? Thanks again

    • @exeterrider
      @exeterrider  Před 10 měsíci

      The top screen has more info so I would stick with that but yes it can seen to take a long time to boot I know 👍

    • @arnaudvasquez7637
      @arnaudvasquez7637 Před 10 měsíci

      Thank you@@exeterrider Patience is key! 🙂

  • @NooBiker
    @NooBiker Před 2 lety +1

    Useful guide. How often does it need doing?

    • @exeterrider
      @exeterrider  Před 2 lety +2

      Every 1500 miles or so I use the process. With DCT, it can get a bit "jerky" when pulling away and slightly jerky when pulling away. This softens the whole bike out again👍🍻

  • @getgt98
    @getgt98 Před rokem +2

    Tried this on my new NT1100 after 2000 miles. Unfortunately, did not work and the display (M, D, S1, S2, S3) disappeared 🙁🙁 I now have to guess what mode I am in. Any ideas ??

  • @petewebb6952
    @petewebb6952 Před 2 lety +1

    What is the DCT like on a sudden adverse camber uphill hairpin bend (like the Exeter Rd as you enter Moretonhampstead)? The sort of place I might feather the clutch in 2nd or even 1st gear…

    • @exeterrider
      @exeterrider  Před 2 lety +2

      It's actually easier I find, use the throttle as you normally would and the DCT works it all out for you. Very clever stuff.

    • @petewebb6952
      @petewebb6952 Před 2 lety +1

      @@exeterrider - ha. A bit like a leap of faith. I must try it one day. Maybe Bridge have a demo.

    • @exeterrider
      @exeterrider  Před 2 lety +2

      They do already mate, pop down and try it. They had a nc and a 750forza👌🍻👍

    • @oldbirdonabike2493
      @oldbirdonabike2493 Před 2 lety +1

      Try the bike from Bridge & if you want to feel how good the DCT is on the Moretonhampstead Road stick it in Sports Mode. That road is made for the bike 😃

  • @mindspinn311
    @mindspinn311 Před 2 lety

    Do you recommend doing this before the first service, or is the dealership going to do it anyway as part of that service? I’ve been wondering why sometimes from a cold start I can hear the transmission doing things at idle before I pull away. Maybe mine auto calibrates itself sometimes (CMX1100 DCT).

    • @exeterrider
      @exeterrider  Před 2 lety +2

      To my knowledge, I think dealers do this on the bigger services but do someone's do it on the oil services aswell. Check what I'm saying with the dealer but down the line after a few thousand miles I would start doing this more regularly. As I said, do check with the dealer to see if they do it when servicing 👍🍻

  • @simongilbert2704
    @simongilbert2704 Před 2 lety

    very helpful ,,, but on a 2021 bike how did you get it to that stage in the first place ? what happened . cheers simon .

    • @exeterrider
      @exeterrider  Před 2 lety

      Routine adjustment much like adjusting a chain. 👍🍻

  • @K3vly
    @K3vly Před 2 lety

    Any chance of doing a full dash set up , Including the date that seems to be backward or american style I,e 222705 instead of 270522

    • @exeterrider
      @exeterrider  Před 2 lety +1

      I have so much to film at the moment but it is on my "to do" list

  • @Mihaivis
    @Mihaivis Před měsícem

    Hi! You guys had ever encountered starting the cold engine and immediately it stops, then starting normal on 2nd go?

  • @lyndonp3391
    @lyndonp3391 Před 2 lety

    Hi Exeter!.
    Quick question please.
    Does it make any difference if this reset is done on the centerstand/sidestand/upright/ rider on...?.
    Or any which way?!.
    Many thanks.
    🖖

    • @exeterrider
      @exeterrider  Před 2 lety +1

      Hi Lyndon, it's a centerstand or Rider on job..... Its easier to do just sat on it tbh. Are you the famous Lyndon P?

    • @lyndonp3391
      @lyndonp3391 Před 2 lety

      @@exeterrider Ha no. I'm just a chap who used to live in St Agnes who owns an Nc!.
      Many thanks for reply ER, been a subscriber for a while now,and your vids went a long way towards me getting the ncdct.
      Great channel. 👍

    • @exeterrider
      @exeterrider  Před 2 lety +1

      @@lyndonp3391 Brill Lyndon. Glad you're enjoying it. I can't see me selling mine ever, just to good at many things 👍🍻

  • @kevinlewis3200
    @kevinlewis3200 Před 11 měsíci

    Will this work for keyless ignition by pressing the on button and turning the off/lock ring?

    • @exeterrider
      @exeterrider  Před 11 měsíci

      I couldn't comment Kevin sorry. I have only done this on bikes with key ignition.

    • @kevinlewis3200
      @kevinlewis3200 Před 11 měsíci

      @@exeterrider Hello again, I have just tried the procedure on the X-ADV (2022) at 85C using the console on button and stop knob and it worked. The pronounced jerk on pull away has gone. Thanks for your help

    • @exeterrider
      @exeterrider  Před 11 měsíci +1

      @@kevinlewis3200 thanks so much for the update there Kevin, it means when I get asked again I can say yes it does work. Thanks 👍👍

  • @gatti493
    @gatti493 Před 2 lety

    Hi pal this looks similar to my africa twin dct 2020 1100 , would this be the same although you have stated 2021 ??
    My bike has 3500 miles on it and has just stalled first time but has been threatening to stall on previous occasions, I'm hoping this may be the issue??

    • @exeterrider
      @exeterrider  Před 2 lety +1

      Not sure it will help that issue tbh, but there is no harm in trying.

  • @mangusta57
    @mangusta57 Před rokem

    Hi, I have Honda 2022 NT 1100 D can I reset my DCT same way?

    • @exeterrider
      @exeterrider  Před rokem +1

      I don't know tbh, I would guess so!?

  • @robertherman1146
    @robertherman1146 Před 2 lety

    In late November Honda issued a recall on some 2021 NC750X DCT bikes in USA, Europe and Japan. They’ve determined a software problem in the fuel injection control module programming. Contact your Honda dealer/service dept. They will update the software for the fuel injector module, as well as the software for the DCT. I tried adding a link to the recall notice but YT deleted it.

    • @exeterrider
      @exeterrider  Před 2 lety

      Yes I have heard of this. Glad you know about it too👍🍻

  • @kronometer_viktor
    @kronometer_viktor Před 2 lety

    Should it work with keyless models? (Forza750)

  • @UncleWally3
    @UncleWally3 Před 2 lety

    Aside from a design flaw, what causes the need for a reset in the first place?

    • @exeterrider
      @exeterrider  Před 2 lety

      No design flaws . Anything mechanical with constant moving parts such as clutch and auto boxes have many tolerances and adjustments to be made. So the reset just adjusts the 2 clutches and gearbox selector solenoids for perfect shifting : )

  • @joecaljapan
    @joecaljapan Před 2 lety +2

    Konami code vibes on that reset procedure

    • @exeterrider
      @exeterrider  Před 2 lety +1

      Not sure that makes sense but, it dosent do much for vibes no👌🍻

  • @marklevy9
    @marklevy9 Před 2 lety +2

    To do the reset you should hold the d button down, turn they key AND WAIT FOR THE YELLOW ENGINE LIGHT TO GO OUT and then do the reset as shown

    • @exeterrider
      @exeterrider  Před 2 lety

      That happens pretty much instantly on the 2021 compared to older models I found, do you think the same mark? I'll pin this one though incase I'm missing something 👍🍻

    • @marklevy9
      @marklevy9 Před 2 lety +1

      @@exeterrider I have a 2021 and yes it is fairly quick, but worth just keeping an eye on it especially as the reset is the same for all dct bikes regardless of the age and button types.

  • @medkaoutara2473
    @medkaoutara2473 Před 20 dny

    Hi brother i try it with my xadv 2021 but the problem i have is the d flashing is not working , any help , i make the same steps

    • @exeterrider
      @exeterrider  Před 20 dny

      Hi, engine needs to be really hot before you do the process 🔥👍

  • @lorimcquinn3966
    @lorimcquinn3966 Před 2 lety +1

    Is there a specific reason for this to happen? IE. Changing out battery, disconnecting battery for service work?

    • @exeterrider
      @exeterrider  Před 2 lety +1

      Generally speaking it's a good thing to do every 2000 miles or so just to keep the DCT selectors tuned.

    • @lorimcquinn3966
      @lorimcquinn3966 Před 2 lety

      @@exeterrider Thanks for the info.

    • @exeterrider
      @exeterrider  Před 2 lety

      👌👍🍻

  • @johnbaker9483
    @johnbaker9483 Před 2 lety

    Does the engine has to be warm.. can it be done from cold

    • @exeterrider
      @exeterrider  Před 2 lety +1

      No it needs to be fully hot, not just warm. It won't work from cold.

    • @johnbaker9483
      @johnbaker9483 Před 2 lety

      This works really Well..

    • @exeterrider
      @exeterrider  Před 2 lety +1

      @@johnbaker9483 amazing isn't it 👍👍🍻👏

  • @kevincruz7627
    @kevincruz7627 Před rokem

    After i do this my motorcycle wont start.. what should i do?

    • @exeterrider
      @exeterrider  Před rokem

      Sounds like you have other issues I think. 1000s of time this process has been used and there's no issues. Perhaps a side stand issue?