3D Printed Piper CUB Model Airplane (107cm). Print, Build, Paint, Fly, Have Fun. Free Build.
Vložit
- čas přidán 11. 06. 2022
- 3Dlabprint Piper Cub RC model airplane making. Printed with LW-PLA (Light Weight) filament.
A great RC model, flying very stable.
* 1 x Motor: 2212 980KV Motor: s.click.aliexpress.com/e/_Dlo... OR tr.banggood.com/custlink/v3DY...
* 1 x Brushless 30A ESC: s.click.aliexpress.com/e/_Dnc... OR
s.click.aliexpress.com/e/_Dek...
* 1 x 8060 propeller: s.click.aliexpress.com/e/_DCO... OR
tr.banggood.com/custlink/vvKR...
* 1 x LiPo Battery 11.1V 1000 mAh: s.click.aliexpress.com/e/_DEn...
OR 11.1V 1300 mAh: s.click.aliexpress.com/e/_Dd8...
* 4 x Micro Servo (MG90): s.click.aliexpress.com/e/_DCf... OR s.click.aliexpress.com/e/_DD1...
* Radio Control: s.click.aliexpress.com/e/_DCP... OR s.click.aliexpress.com/e/_DCP...
* Lipo Battery Charger: s.click.aliexpress.com/e/_DF5... OR
s.click.aliexpress.com/e/_Dlw... OR
www.banggood.com/custlink/vKm...
* ESUN PLA-LW filament: s.click.aliexpress.com/e/_DlN... OR s.click.aliexpress.com/e/_DmZ... OR s.click.aliexpress.com/e/_Dkf...
* Super CA Glue with Spray Adhesive Activator (like this): shorturl.at/cLZ27
OR s.click.aliexpress.com/e/_DD4...
Radiomaster TX16S Mark II: s.click.aliexpress.com/e/_DCZ...
Piper Cub 3D Files: 3dlabprint.com/shop/piperj3cub/
Full flight video (No edit): • 3DLabprint 3D Printed ...
Full flight video (hand lounch) (No edit): • 3DLabprint 3D Printed ...
Thanks for watching. If you want to support, join this channel.
/ @kendin-yap
Technicial Specifications:
Wingspan: 1068 mm / 42.0 inch
Lenght: 675 mm / 26.6 inch
Height: 310 mm / 12.2 inch
Wing area: 18,15 dm2 / 1.94 square feet
Wing loading: 31 g/dm2 / 15.3 oz/square feet
Center of gravity: 44 mm / 1.73 inch from leading edge
Airfoil: LHK12 modified by 3DLabPrint
Print weight (LW PLA Painted): 270 gr / 9.52 oz
Takeoff weight (with 3s 1000 mAh lipo): 620 g / 21.87 oz
Required control system: 4 channels, 4 micro servos
Suitable battery (3S): 11.1V 1000Mah - 1100Mah Lipo battery
Suitable motor: 2212 Brushless Motor (900-1400KV)
Suitable propeller: 2 Blade 8x6 (8060)
Filament: LW-PLA (ESUN)
#rcairplane #diyairplane
All of my videos : bit.ly/2Z9QVYK
Thank you for watching. Please Remember to Share and Subscribe for More Amazing Videos. - Jak na to + styl
Im going to be honest here; i was expecting some barely flying plastic thing but im really surprised (in a good way) of the building quality and looks of this cute Piper Cub. Well done, hats off to you Sir!
Yes
I like that bit of cinematography where the shot is from inside the fuselage. Well done.
My grandfather had a Cub back in the 50's, he flew it from Washington to Oregon to go on dates with my Grandma (he was way cooler than me:P). He also loved to and could build pretty much anything, seems like a fun project.
What a fantastic video - thank you for answering a load of questions through making such a thorough job. You have fantastic attention to detail. Clear Skies!!
One of the best assembly vids ive seen. Well done
Estos son los videos que animan a la gente a hacer cosas por uno mismo. Excelente material, gracias!
Nice plane! It has a lot of great design features.
I just buy a new 3D printer because of your kind contribution! Cheers !
Thanks for your updated session.
was super satisfying to watch
Brilliant... I love the filament hinges!!!
Teşekkür...!
herzamanki gibi 10 numara 5 yıldz.. süper oldu.
que aeromodelo lindo....parabéns!!!!!
Another masterpiece from this man,the only channel that i don't joke with it's upload notifications 😅 good job man💓 Hats off to you,i would bring my questions later after studying the video😍
WORLD CLASS bir kanalsınız. Maşallah. Gurur verici. Teşekkürler video için.
professional work, Thanks my friend ♥️♥️♥️♥️♥️♥️♥️
Pilotajında süper işçiliğine üstad tebrikler...
Really well done. Great job
Great design man really cool 👍
Prodüksiyon gelişmiş elinize sağlık 😁
Thanks for your updated session. I'll watch your later. I'm in my work LOL - I need your tutorial soooo much
Wow your amazing with all your ideas you inspired me to build my own foamboard airplane. I'm going to maiden it this week. 😊
perfect!
Elinize sağlık yine süper olmuş.
Yine harika bir proje 👍
excellent work!
Güzel bir proje daha. 👍
very nice !!! tank you !!!
"Usta, zor olanı kolay gösterenmiş" Eline sağlık usta
Good stuff as always
Aí fica fácil demais , tudo de bom !
Ellerine sağlık yine efsane olmuş 🔥🔥🔥
Harika olmuş
çok güzel uçak emeğine sağlık kolay gelsin 👍
Thumbs up!!!!
Nice video
Bravo bro
To prevent the wings from sagging due to sunlight, we recommend 1mm carbon rods instead of filaments.
It's melted??
@@achmadiqbal80 pla easy to deform under heat
Mantap om
Desde Argentina te felicito por lo simple y practico. Estoy armando uno, espero que me salga parecido al tuyo !
çok başarılı bir çalışma olmuş bu uçağı uçururken kuyruk kısmına renkli duman ekleseydiniz harika bir şov olurdu elinize sağlık
Sana helal olsun kardeşim
En sevdiğim model
Mükemmel
harika...
First like and first view...love from India ❤️
Just started building that model. The holdup was getting a printer that could do a decent job of printing it (that being a Qidi X-Max3).
Beautiful hand painting work looks good I do same thing I hand paint with sign painting paint and brushes like old school sign lanterns for my pinstripes and designs on my 3d printed planes or sometimes I'll 3d print it in the main color then paint the design on to it saves time and few bucks in paint
I wouldn't recommend painting PLA black when you want to use it outside on a sunny day! ;)
Awesome build and footage though!
abi videoların çok güzel inşallah çok daha büyürsün emeğin in karşılığını alırsın
New sub!
I love your videos! I would like to show you my project of DIY plane mixing 3D printing + foamboard!!!
That's the way you do it ...
this is awesomeeee, i might print this because ive got a 3d printer, some extra filament, and time. and i really want to start flying rc planes
okay i downloaded the files, what do i do now, i cant open tem in my slicer, so like how does this work
@@Evan-rq2ee Bro please share the downloaded file , i cant download it
New sub ! Liked 🚀😊😄
New sub! Liked 🙏🚀👍👍
Show !!!!!!!!!!!!!
Abi gerçekten harika işler yapıyorsun eline sağlık. Tu-95 tarzı pervaneleri birbirinin tersine dönen bi uçak yapabilirmisin?
Clever hinging...
Thank you for files
Which slicer did you use? I've been playing with this print for a few days and I've hammered out all the issues, except the flanges where the parts come together sometimes don't fit correctly. What slicer did you use? I tried Cura, but might switch to Prusa.
I used Simplify3D for this plane. (Factory Files)
👍👍👍
👍👍
Can you use a soldering iron to connect the parts together?
HI i have question i might travel to turkey and wanted to fly rc airplanes there do u have any ideas what is required for license to get to fly there also the shops i can buy parts from if u can plz inform me also promodel donst have much of parts if u can tell me about more shops ty!!
Where did you get the rudder and elevator push rod from? Can't find any long enough.
Hi, I watched this on my tablet. Your video is so cool I almost got frostbite from watching it. This took a lot of thought and talent to create. I am a retired RC modeler. I have been teetering on getting involved with 3D printing. Your video has pushed me over the edge! My wife is already sorry she let me watch this. LOL I have some questions. What printer are you using? What design software are you using? Where do you get filaments? I is it worth it to buy an extruder? Is there a shareware sight where I can buy designs? THANKS! Shalom/gw
Thanks. 3d printers I use; Original prusa MK3S+ and Artillery Genius. I buy the filaments from a local dealer. It doesn't matter. There are many sellers. I shared a link for aircraft designs in the description area below the video. Piper Cub is free. Apart from that, there are many sites where you can get plane designs for 3D. Some... www.planeprint.com , www.eclipson-airplanes.com , www.3dlabprint.com
That filament is lightweight PLA. It’s a bit trickier to work with than the standard plastics for 3d printing.
Beautiful, I downloaded the project weeks ago and soon the mold and I make a video in my channel, if you want to see I printed eclipson but 1.4 👍🏻
hello.
it so beautifull...
can you add mpu6050 and oled to your handmade 6 channel arduino nano radio control?
mpu6050 is more important...
I think it is a simple cub model
Reis acaba ejderha tarzı bir uçak yapar mısın ?
Hi, did you have any problems with unsupported areas of the nose? I am trying to print in lw PLA as well but bridged areas come out really ugly!
I had a problem when I tried it with Artillery Genius. But then I printed with Prusa MK3S+ (S3D factory file). And it was okay. When I tried it with Ender 3 V2 and ready-made G-Code, I was able to print without any problems.
What size 3D printer is required to print the parts?
Did you print this in Vase mode or Normal?
Awesome build! did you print the ESUN LW-PLA parts with the 3Dlabprint provided Gcodes or did you reslice for the ESUN filament? Thanks!
In general, I used the settings specified by 3Dlab. I made minor changes to the nozzle temperature and flow settings. You may need to adjust these two depending on the filament brand you use and your 3D printer.
I love my 3d printer I can litteally 3d print any rc plane I want they looks very scale and beautiful and notade out of foam of any kind and fly beautifuly and no need to monokote or pin pieces of balsa wood to plans and glue pieces of balsa wood together and spend a few .months building an amazing plane that you got 1000 dollars into and then the esc desides to have a brown out of decides to go bad and boom beautiful balsa plane or store bought 600 dollar plus beautiful foam plane gone in seconds. That's why I love 3d printing my own planes they look beautiful fly like a true balsa plane with a little weight and fly way better then any store bought foam planes. And if I crash my 3d printed plane I can just print a new part in a hour or so or just print a whole new plane in about 24 hours for the cost of 10 cents or less in plastic
İlk defa uçurmuyorsun belli ki 😅
I have a Bambu Labs printer using Bambu Studio, which isn't recognizing the interior geometry of most of the parts. Just the external geometry. Fuselage #1 printed just fine. Everything after that has been a bust.
The bamboo silcer is very new. I don't think it has some of the print settings needed for airplanes. Designers will probably make improvements on this issue in the future. Prusa silicer also did not support this a few years ago.
Didi you use the pre sliced Gcodes??
Tolles Video, sehr gut gemacht! Danke! Ist es möglich, dass Sie hier Ihre Druckparameter für das eSun LW/PLA zur Verfügung stellen? Das wäre großartig! Danke!
Elinize sağlık. Daha öncede videolarınızı görmüştüm. Uzun zamandır bu hobidesinizdir diye tahmin ediyorum. IMUK'u görünce şaşırdım :) Proje dosyasında değişim yaptınız mı yoksa direkt yazdırdınız mı?
Teşekkürler. Akış ayarını değiştirdim sadece. Gövde 53, kanatlar 55. Başka bir değişiklik yok.
If I print this plane of ABS will it fly??? The thing is my printer cannot print PLA.
Hi, quite new to rc and doing this for a school club. How did you connect/pair the remote to the controller system? Is there a general guide to do so? thanks.
This is not the same for every brand, but in general matching the transmitter and receiver is a simple procedure. Search with the word "BINDING" for the brand and model you are using. You can find many resources.
Can you share your printing profile or printing settings? it looks really good!!
I used the S3D (Simplify3D) settings shared by the designer. I just changed the stream value. Flow value for body parts: 53 , for wing parts 54
wht r the lengths needed for the rods?
elinize kolunuza sağlık bu model uçağı satarmısınız kumanda hariç?
Any rc plane require to check air directions .. please tell me
Being that I live in a 5th wheel, don't have space for 3d printer, do you sell the printed parts for people to build their own planes. I understand I will need to get al the extra stuff to make if fly
I'm not trading. There are companies that provide 3D printing services. You can research them.
Would it be a problem printing this in Pla+, weightwise? I have some yellow Pla+ laying around you see🙂
Printed parts will be approximately 40% heavier. That's a little too much for a small plane. It does not prevent it from flying. But Stall speed will increase.
Elektronik sistemini ben de kendi tasarladığım uçağa yerleştireceğim ama uçağa kamera monte edip canlı olarak daha gerçekçi uçuş deneyimi yaşamak istiyorum.
Bhai ESC brushless banao
pil olarak 4000 mah kullansak ne olur
Elinize sağlık harika olmuş. Lw pla yi nereden temin ettiniz?
seninfabrikan.com/filament/esun/epla-lw/1-75/ ben buradan almıştım.
What's your settings? I've also printed the model using eSun LW-PLA but the stringing is crazy.
Settings vary by machine. You should use the settings that the designer posted on his site to get started and find the appropriate settings for your particular machine with a bit of trial and error.
What happens if I print it with normal PLA? Will it work? As far as I understood it weights around 700g without electric.
With normal PLA, its weight will increase. And the flight time will be shorter. It will also be less stable. But it will still fly.
do you remember the wall thickness you had in the printed parts ? Mine are 0.40mm with the origianl gcode, i think they should be near 0.60 (based on the user guide)
0.61 - 0.62
@@Kendin-Yap which flow did you use? i'm unable to go over 0.4
öncelikle sizleri yeni keşfettim gerçekten çok güzel bir kanal. Fakat bu tarz RC modeller yaparken en zor kısım olan elektronik devreleri haberleştirme (Kumandayla Kontrolcü haberleşmesi ve ayarlaması) bölümünüde anlatırsanız proje tamamen bitirilebilir
Teşekkürler. Bu tip konuları daha önceki uçak yapımı videolarımın bazılarında gösterdim. Ayrıca sadece elektronik bağlantı ve ayarları gösterdiğim videolarım da mevcut. Daha önceki videolarımı incelemeniz faydalı olabilir.
@@Kendin-Yap Evet kanaldaki bütün videoları izledim ve onlarıda gördüm çok teşekkür ediyorum sizlere. Bu arada konu dışı olacak fakat RC parçaları basmak için Creality Ender 3 Pro modeli yeterli olurmu acaba ?
@@NoobArchers Ender 3 bir çok 3D uçak için uygun. Bazı tasarım firmaları Ender 3 için hazır G-code dosyalarını da veriyor. Ama Tekerlekler gibi Esnek TPU malzeme kullanılması gereken parçalar için çok uygun değil.
Great build, just how did you print this, can you share your printer settings, and how do you print without stringing? Thanks
You can’t print lw-pla without stringing which is why all these 3D printed plane companies use as little travel as possible. He probably just used the g-code that comes with it. I’m going to start printing this tomorrow and the only change I’m making for the ended 3 pro is the retraction in the g-code.
@@polar1991 I was able to get great results with PRUSA Slicer, worked much better than CURA, just one last question do you print this plane wall width with 0.4 or 0.8 wall width? 0.4 seems to thin for me.
@@arrie1978 I haven’t figured that out yet. There is a guy named Troy McMillan which has a channel that is all about 3D printed rc planes and he has a video on the best settings for lw pla planes. Hope this helps
Bir roket gibi bir şey yapabilir misiniz? En yüksek hangi noktaya kadar çıkarabiliriz?
Can I ask what type of paint did you use looks stunning
acrylic spray paint