BUILDING A CURVED RANGE HOOD
Vložit
- čas přidán 23. 08. 2024
- The final piece in a kitchen I’ve been wrapping up. This curved range hood ! It will be painted on the top curved section , stained on the lower white oak section.
.
Music: www.bensounds.com
.
.
#customcabinetry #rangehood #venthood #concave #curvedhood #kitchencabinets
Your sense of humor is …unique
When you said the upper part would be painted at the end....I was like....painting over walnut veneer?
You must do a decent amount of veneer work to have the confidence to seam that front panel in the middle. No way I'd nail that seam lol
Great build God bless!
Love your content. The only reason I think your videos don’t receive millions of views are because the processes are beyond that of an intermediate cabinet maker/ carpenter. I have been building cabinets for a few years now and work a remodeling contractor and I’ve learned so much. Would like to see a video on how you go about decorative toe kicks and applied toe kicks.
My favorite hood shape. Absolutely beautiful!
Thank you !
I love love love your channel.
Thanks ! Glad to hear it
Thank you! Yes, I enjoyed it very much. Not the exact style I am going for but the process will help tremendously! You did an excellent job.
Thank you !
Yes, I really enjoyed this video. Would love to see the fan insert installed and the hood installed in the kitchen. Any chance of this?
Great video.
I was watching to see
how to trim veneer
on the curves.
Unfortunately that part was skipped??
But i learnd a lot thank's.
"I was watching to see how to trim veneer on the curves." Me, too. In another video perhaps?
I actually just trimmed it with a razor blade then sanded . So that part was easy it was the laying it down without getting any wrinkles that was hard which was why I wasn’t focused on that actual filming . Will do better next time !
Thanks !
Very nicely done! I hope you have more content coming!
Thanks ! Finally just posted a new vid !
I use to make skeleton venthoods now I just cut shape miter corners freehand on table saw then curf backs glue and assemble install nailers and done
Look up Ventura homes lubbock texas and I've done all venthoods and 99 percent of fireplace treatments.
ماشاءاللہ بہت ہی خوبصورت انداز اپنایا ھے کیچن بنانے کا اسلام علیکم بھائی
Looks like you do great work, but may I suggest that if your goal is to monetize CZcams try slowing down the time lapse to 2x speed. Makes the video much more comfortable to watch.
Thanks you ! And thanks for the feedback . I just made a new vid finally and have some real time building not speed up at all. I just had this thought it would bore people if it wasn’t sped up but I think I was wrong . I’m Learning
Nice work
Thanks !
Another cool video and concept. I’m glad to read that it’s held up for eight months or more. I’m curious if you used a special finish for it? I imagine it would get greasy over time, like any hood.
Thanks ! Yes it’s been in over a year now still looking perfect which I expect will be the case for a very long time to come
It’s finished with conversion varnish
Yes regular wipe down cleaning would be beneficial . Grease won’t stick to conversion varnish the same way it would to regular paint it can be wiped down more easily at least in my experience.
Why did you use two layers of 1/8" MDF? What would have happened if it was only one? Great video!
I just wanted it to be a little thicker for structural rigidity . Thanks !
@@cabinetwise : thanks - great video!
😂❤🎉 This hood is absolutely gorgeous! I wish I could make one like that, but I guess that’s quite above my skill level. Thx for the laughter, you are very funny! 😂
Do you sell these?
Why thank you ! I don’t usually sell them individually they are usually part of a whole kitchen remodel . . Glad at least one person gets my humor 🤣
Great video man, if you don’t mind sharing what are the dimensions of the hood? I want to attempt to copy that shape and curvature. What is the top width in proportion to the bottom? If you don’t mind sharing
Hey! Why’d you chose mdf instead of plywood? I’m looking for reasons as I’m getting mixed advice. Also what glue did you use for the corners and laminating the mdf? What glue for the veneer? How well has it stood up to moisture and heat?
I actually just wanted to try it out . Both ways would be fine . I used tight-bond glue which I rolled on with a paint roller . That was about 8 months ago now and it’s installed and has held up great so far . I don’t anticipate any problems .
Ok love the channel watch all the old ones ( just found u bout 2 weeks ago). But now I gotta ride u a little like a stump broke mule !!
“ that music is amazing I mean I threw away all my music and replaced it with that!! I mean I never thought hey you a pro craftsman you can learn so much faster watching videos at 10x and attached to just hardcore blazing music”!
I know it’s boring to you however; that’s how ppl like me who are licensed and bonded learn by watching a pro and picking up tips & habits of a pro carpenter! I do finish and some cabinets but would like to expand my knowledge base! I hv done range hoods but was all jacked to see this then wow?
I know I can fly a kite ? But really I want to learn? By the way almost all your teaching channels skip the music or severely limit it?
I know I can fly a kite?
Ok I will keep watching buddy!
I know I can fly a kite!
Nothing like royalty some horrid free music to blast your eardrums 😂 forget about all the actual talented artists who charge money and copyright strike ! Pfft who needs em. In hindsight I’ve leaned that less is more in that area haha. I was just learning to make a vid back then . New stuff coming will be much better quality. Thanks for watching !
What model of Pacific hood has the controls undernieth
For the trim around the base, is that just some base cap?
Yes 👍 that’s it
How did he get the shape or geometry
It reminded me of a turret roof where only three sides were covered on a hexagonal half lapped base an O/G ribbed mortased rib one was open slat second was closed third was masonite
I really try to make everything simple so it started with sketching out a template on 1/4” plywood then refining it to get the right shape . Then everything is built off the template
more content on building----less content on you reading----otherwise, pretty good video----thanx
Noted 😂 yeah back when I made this I had no subscribers and didn’t expect it would get so many views . Just sort of goofing off . I definitely have a different approach in my newer vids . Appreciate it !
Agreed, good looking work but not sure why you're filming yourself reading your narration notes -- and reading like a first grader. Just makes it too hard to get in to watching.
Go watch something else then. He didn't hold you at gun point and force you to watch his content.
@@jwill9877 that's pretty much what I said I did! But perhaps he'd want constructive feedback on how to make his videos more appealing to increase views in the future. Anything else you'd like to tell me to do while you're at it?
@@jeffbrazill764 yes there's more I'll tell you. first off you didn't say that and you watched the whole video and even came back to comment. Second you were condescending. That's not constructive feedback. Besides if you want good sound editing and special effects and entertainment, watch a Michael bay movie. This guy drops gems on his videos a most people are here to learn. Looks like you missed his sarcasm. He said "I need to stick to the script" probably for people like you who comment under the guise of "constructive criticism" when in reality they are trying to learn something far more advanced then they are even capable of building.
@@jwill9877 nice, keep going!
Thanks for that ! I do appreciate constructive feedback tho. . I do have strange humor I guess 😅. Just posted my first new vid in a while so hopefully I’m getting better !
so hard to watch this!
😂I agree but it got more views than I expected so I was hesitant to delete it. Hey I’m a work in progress 🤷🏼♂️ I think my newest vid is better personally .