The oil separator was my first mod on F150 (2019 SPORT) ingot silver. The 2nd was the tail gate opening assist! Then the rear seat latch. Then WeatherTech floor mats. Then the shorty antenna. (NOTE: Many are not aware the dual purpose of the stock antenna. It protrudes slightly above the cab of the truck to indicate maximum safe height. If you bump the stock antenna, your overhead clearance is too short!!!) Then LED backup assist lights under the rear bumper. Then the light strip under the tailgate. Then (switched) wiring all the way in the back insides of the bed for 12v plug and USB ports on both sides. Then a DashCam, powered by the rearview mirror. Then finally covered the whole bed with an A.R.E. cab high shell w/ a BEDRUG. Just recently purchased a vinyl boot between cab and shell. Now I want side step rails.
2017, F-150 Lariat, 2.7 EB. First 7 Mods: laser-cut floor mats front/back (various brands - I've been impressed with Husky => W.T.), mud flaps (again, Husky => W.T.), Tint (varies on your location), Catch Can (JLT v3.0), Seat Covers - rear minimum, center console cover (various options/personal preference), rubber anti-slip truck bed mat (presuming you already have a spray-in liner)... ok 8: under back-bench-seat storage...
@@theoverdriveconsumerchanne4424 Yep! Being a white truck, it was a gotta-have in my book and was probably #9 in the sequence above... I wish I could share pics here... The latest mod was the BuiltRight rear seat latch - who knew that there was so much unused (but until now, inaccessible) space behind the rear seat-back?! Also, I am a fan of dashmats - they reduce the glare back from the dash to the windshield then back to the driver, protects your dash from U.V. and, for me, just 'softens' the view/experience overall - the "Ultimat" fits like a glove. Oh... and AVS side-window 'shades/wind deflectors'...
@@theoverdriveconsumerchanne4424 Added a backseat-back latch (BuiltRight) this past week and forgot to mention the stubby antenna earlier... I'll get pics up on IG/FB.
This type of video is excellent. I can use this information. Thanks, But The camera should spend more time on the truck and the modifications you worked so hard on rather than your face. Nothing personal, but show the truck! Camera work on the mods.
Thanks for taking the time to comment and for watching! This was one of the first videos I made. I have made additional mods since this one (just about all of them I have posted a video for). I think I’ll make another one soon with all the mods to date.
It’s coming very soon Bryan! Stay tuned! Right after thanksgiving I should get my heads in and they will be installed as soon as possible. Thank you for taking the time to comment and for watching; it means a lot to me! Don’t be a stranger, come back by and see us! Daniel
My ‘21 XLT Sport came well equipped but I did the tint and even the same antenna lol! Instead of the wheel well inserts I had the rear wells Line-X’d when they did the bed liner. Best damn investment I could make on that truck, even more so than the Rough Country seat covers and Weathertech floormats all around
Honestly, driving a normal sized car behind these generation F150 is BLINDING, like something about the height of the headlights, installing brighter onese is gonna suuuuucckk lol
Great point... I made sure my new leds were aimed properly so that it would mot blind anyone. With the projectors you can get them dialed in. No complaints from on coming traffic. Thanks for taking the time to comment and for watching! Daniel
Ford sells tens of thousands of F150s every month, sometimes even more. All the advice and insight in this video? Bet it gets a million views sooner than you think!
Thanks for taking the time to comment and for watching! I’ve done more since this video. I’ll do another video this summer with the most recent mods to date!
Don’t get one if you live in cold weather........unless you don’t mind standing in a blistering wind chill day waiting 30sec for your tailgating to open
sure... If your truck is 2018 and newer you will need two sets and 2015-17 should be good with one. www.amazon.com/gp/product/B084FM2Y5S/ref=as_li_tl?ie=UTF8&tag=overdrivecons-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B084FM2Y5S&linkId=f6c9856bf4c4e327e814e96e25bb502b
Haha that was one of my first videos… I've gotten better… at least I felt like I have gotten better. Thanks for watching and taking the time to comment!
There is a lot of chatter about catch cans both for and against the need for one. I'm not knowledgeable enough to pick a side. At the least, it won't hurt anything and should give you some measure of peace of mind. I may consider one for my recent purchase.
I’m a believer! I just put one on my wife’s new expedition. I posted my results of just 3000 on my new f150... please check it out the link below if you haven’t seen it already. Thank you for taking the time to comment and for watching! Also congrats on your new ride, I’m sure it’s nice! czcams.com/video/PHJmoPqik-w/video.html
Fyi engine love water ,water cleans carbon off valves and pistons oil catch can slows down blowby gases and can possibly push oil out of you engine front and rear seals on high throttle load the engine will run a very long time without a catch can unless you have the 3.5 then you may want one
Get a luverne brush guard. Husky floor mats that go all the way around inside including the center hump areas. No leather seats? Thats fine. Get the clazzio seat covers. People think i have stock leather seats now. They fit that good. And look that good.
Here you go boss! Thanks for watching! www.amazon.com/dp/B0134UWBPO/ref=cm_sw_r_as_gl_api_glt_fabc_88S6NJETM76CP6VWPX47?linkCode=ml2&tag=overdriveco01-20
Yeah I did the same wheel well liners... what a BITCH... i was told to take the wheels off to make the install easier, but of course i ignored that advice and just powered thru it...I also went with the husky floor mats.. kept the floor nice and clean during winter months
Bruh, there is no reason that those liners should have been that hard to install. Seriously, it should have been the simplest install ever but no. If I recall correctly the passenger side went on line you would expect but that drivers side; it took me 2 hours. Thanks for taking the time to comment and for watching!
@@theoverdriveconsumerchanne4424 I agree that taking the tires off would have made the job easier but in my case, I have a sloped driveway (and can't fit the truck in the garage) so I/we just had to slog through it. Driver's side was 10 minutes... Passenger side was a serious PITA - finally went to local Big Box store for a 1" hex/cap screw that I was able to get started crooked but finally straightened in the hole... then painted it black with nail polish. It *should* have been much easier. My ONLY disappointment with Husky products and I let them know that in no uncertain terms.
Thank you.. Interesting, personally, I believe in aiming my headlights to ensure that on coming traffic isn’t impacted. Not sure where you’re going with this comment.
I am aware of the dual injection starting in 2018 year models and I still believe through my testing of several F150s it is still worth having. I have many videos on the subject actually. 🥰
@@theoverdriveconsumerchanne4424 The can if I'm right catches the oil blow by so that junk doesn't go back in your motor. I don't see how dual injectors would help with this.
@@DEDBRD-di4yj yes dual injectors do help, but I’ve done a lot of testing on the matter (plenty of videos on the subject on the channel) and it’s my belief it’s still beneficial to have one. If you can prevent extra sludge from going into your engine why not do it? Thanks for taking the time to comment and for watching!
They all have dual injection however, I still want to prevent that junk from going back in the engine. My thoughts are, why allow that junk to be blown back in the engine when you can catch it. Thanks for taking the time to comment and for watching!
It shouldn’t be a problem however any service department could try to deny your warranty. If It is an issue you can simply replace the factory hose and remove the can and it’s back to “factory.” It’s honestly not a big deal and well worth doing in my opinion. There are a couple things the dealership has to do to my truck under warranty as soon as a loaner is available. I will not be removing the can for the work because I believe it will not be an issue. It’s no different than adding a k&n cold air intake. I’ll let you know differently if I experience problems. However for me, it’s worth the risk to protect my engine. Thanks for watching and providing feedback! Daniel
Can we see the mods on the truck? Or are you the mod because that’s all you showed, your face. Not to be a jerk but why make a video to show upgrades then only film yourself?!?
The tailgate assist is behind the taillight so it’s sorta hard to show that. I would reference the video where I installed it but I figure you’ll bash me in that video too. However I do appreciate you taking the time to watch my video.
@@theoverdriveconsumerchanne4424 It's not really just you. I have issues with most You Tubers that just keep the camera on their mug. It would be better to look at your truck the whole time. I still appreciate your video.
It’s not the first time I’ve heard that on my older videos. The newer videos I try to focus more on on the subject rather than me. I’ll try to do better. I appreciate the criticism.
This is a automated message, Daniel, the channel creator is on a remote island and can not respond to comments at this time. He will respond when humanly possible.
It was the second video I made! I will do a complete up to date mod video soon! I’ve done a whole lot to the truck since making this video. Thanks for taking the time to comment and for watching!
Hey man you have to start somewhere... this was one of my first videos. I have made some improvements since and now offer a better video today. Also to note, I have since made more mods since I created this video and will soon do a update covering all of my mods. Will will be a mix of my face and my truck. Thanks for taking the time to comment and for watching!
Dave, thank you for the feedback and for watching; it means a lot to me! It sounds like you had a bad experience. LEDs are actually being put in new vehicles and improve the safety of the drivers by being able to see the road better. The “idiots” are the ones that don’t properly aim the lenses so that they don’t blind oncoming traffic. My leds will be aligned properly and will not be a hinder traffic . I welcome you to watch! In the next 2-4 weeks I’ll have my installed posted. Thanks again! Daniel
The oil separator was my first mod on F150 (2019 SPORT) ingot silver. The 2nd was the tail gate opening assist! Then the rear seat latch. Then WeatherTech floor mats. Then the shorty antenna. (NOTE: Many are not aware the dual purpose of the stock antenna. It protrudes slightly above the cab of the truck to indicate maximum safe height. If you bump the stock antenna, your overhead clearance is too short!!!) Then LED backup assist lights under the rear bumper. Then the light strip under the tailgate. Then (switched) wiring all the way in the back insides of the bed for 12v plug and USB ports on both sides. Then a DashCam, powered by the rearview mirror. Then finally covered the whole bed with an A.R.E. cab high shell w/ a BEDRUG. Just recently purchased a vinyl boot between cab and shell. Now I want side step rails.
2017, F-150 Lariat, 2.7 EB. First 7 Mods: laser-cut floor mats front/back (various brands - I've been impressed with Husky => W.T.), mud flaps (again, Husky => W.T.), Tint (varies on your location), Catch Can (JLT v3.0), Seat Covers - rear minimum, center console cover (various options/personal preference), rubber anti-slip truck bed mat (presuming you already have a spray-in liner)... ok 8: under back-bench-seat storage...
You've got that dude decked out now! Are you going to do the wheel wells? Thanks again for watching and supporting the channel!
@@theoverdriveconsumerchanne4424 Yep! Being a white truck, it was a gotta-have in my book and was probably #9 in the sequence above... I wish I could share pics here... The latest mod was the BuiltRight rear seat latch - who knew that there was so much unused (but until now, inaccessible) space behind the rear seat-back?! Also, I am a fan of dashmats - they reduce the glare back from the dash to the windshield then back to the driver, protects your dash from U.V. and, for me, just 'softens' the view/experience overall - the "Ultimat" fits like a glove. Oh... and AVS side-window 'shades/wind deflectors'...
@@gtj1715 we have a facebook channel and intsagram... Lets see them pics! look at the bottom of one of the most recent videos.
@@theoverdriveconsumerchanne4424 Added a backseat-back latch (BuiltRight) this past week and forgot to mention the stubby antenna earlier... I'll get pics up on IG/FB.
Thats about sum good ideas...I likes em.
This type of video is excellent. I can use this information. Thanks, But The camera should spend more time on the truck and the modifications you worked so hard on rather than your face. Nothing personal, but show the truck! Camera work on the mods.
Thanks for taking the time to comment and for watching! This was one of the first videos I made. I have made additional mods since this one (just about all of them I have posted a video for). I think I’ll make another one soon with all the mods to date.
Would definitely love to see the headlight install and how they look after
It’s coming very soon Bryan! Stay tuned! Right after thanksgiving I should get my heads in and they will be installed as soon as possible. Thank you for taking the time to comment and for watching; it means a lot to me! Don’t be a stranger, come back by and see us! Daniel
My ‘21 XLT Sport came well equipped but I did the tint and even the same antenna lol! Instead of the wheel well inserts I had the rear wells Line-X’d when they did the bed liner. Best damn investment I could make on that truck, even more so than the Rough Country seat covers and Weathertech floormats all around
Great minds think alike! Haha Man what a great idea to line-x the wheel wells! Congrats on the new ride!
Honestly, driving a normal sized car behind these generation F150 is BLINDING, like something about the height of the headlights, installing brighter onese is gonna suuuuucckk lol
Great point... I made sure my new leds were aimed properly so that it would mot blind anyone. With the projectors you can get them dialed in. No complaints from on coming traffic. Thanks for taking the time to comment and for watching! Daniel
@@theoverdriveconsumerchanne4424 yeah bud! Always lookin for info*, great little video here eh
Riiiiiiight… my f150 has the weakest headlights I’ve ever owned.
The jlt oil catchcan was the first mod. I did on my 3.5
Cheers! 😎👍
Outstanding, great minds think alike!
Thanks for taking the time to comment and for watching!
@@theoverdriveconsumerchanne4424
Good video!
Ford sells tens of thousands of F150s every month, sometimes even more. All the advice and insight in this video? Bet it gets a million views sooner than you think!
Wow thanks for encouragement! What is the best engine oil?
Thanks for taking the time to comment and for watching!
The amount you had in your oil catcher I had for about a year of having it installed
Wow! I think it depends on how heavy your foot is 😂. I used to have a heavy foot but these gas prices got me driving lighter.
Nice melon. Intresting stuff. Does any of this void warranties Billy?
Good one ha… and yes it all voids the warranty. I was even surprised that the trailer hitch ball mount receiver even voided the warranty. It’s crazy.
good vid
Thank you! I hope it helped. I am working on several more videos, so stay tuned in! Thank you for watching!
Good tips. Thank you
You’re welcome! Thanks for watching!
Very Righteous✊🏿
Thank you for sharing! 🙏
Thanks for taking the time to comment and for watching! I’ve done more since this video. I’ll do another video this summer with the most recent mods to date!
Yeah it's helping a lot of F150 owners for sure.
Get the auxito led lights for your front end. Mine are otherwordly.
Thank you!
Nice video…would’ve liked to see more of the parts though
It was one of the first videos I did. I’ve learned a lot since then. Thanks for watching. I’m working on videos for my 23 F150 now.
I got the RV trailer hitch to pull 10,000 lbs.
Where did you get the factory tailgate assist? Could you maybe do a video just on it? Thank you again for the great content and quality video.
This is a dealership I buy OEM parts from on Ebay they are the best! ebay.us/mZqWJH
Let me know if I can help in any way! Daniel
@@theoverdriveconsumerchanne4424 this is perfect! Thank you again.
Don’t get one if you live in cold weather........unless you don’t mind standing in a blistering wind chill day waiting 30sec for your tailgating to open
Can you add the link for the LED bulbs that you mentioned? Tks
sure... If your truck is 2018 and newer you will need two sets and 2015-17 should be good with one.
www.amazon.com/gp/product/B084FM2Y5S/ref=as_li_tl?ie=UTF8&tag=overdrivecons-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B084FM2Y5S&linkId=f6c9856bf4c4e327e814e96e25bb502b
@@theoverdriveconsumerchanne4424 it says back up lights, are all 4 just for back up lights or the other two for something else?
@@daviddion3731 Yeah their descriptions are terribly inaccurate. Here is my video on it. czcams.com/video/HtAu8nULtMI/video.html
Got me thinking
I mod everything I get hahah. What are you thinking about upgrading?
Thank you Sir, next investement (A camera Man). Good recommendations though.
Haha that was one of my first videos… I've gotten better… at least I felt like I have gotten better. Thanks for watching and taking the time to comment!
Would definitely like to see the LED install. Thanks.
czcams.com/video/cCmNm51CMRM/video.html
Here you go! Thanks for taking the time to comment and for watching!
There is a lot of chatter about catch cans both for and against the need for one. I'm not knowledgeable enough to pick a side. At the least, it won't hurt anything and should give you some measure of peace of mind. I may consider one for my recent purchase.
I’m a believer! I just put one on my wife’s new expedition. I posted my results of just 3000 on my new f150... please check it out the link below if you haven’t seen it already. Thank you for taking the time to comment and for watching! Also congrats on your new ride, I’m sure it’s nice!
czcams.com/video/PHJmoPqik-w/video.html
Fyi engine love water ,water cleans carbon off valves and pistons oil catch can slows down blowby gases and can possibly push oil out of you engine front and rear seals on high throttle load the engine will run a very long time without a catch can unless you have the 3.5 then you may want one
Like the shirt ;)
Thank you… I do enjoy my freedoms. Thanks for watching!
I added NOVA-Series LED Projector Headlights to mine. crazy amount of light. but get "flashed" all the time. Then I show them my Hi-beams.
Congratulations on the new lights... I’ve heard those are great lights. I ended up going moto xb hybrids. They are nice.
The JLT is illegal in California but i don’t care… it actually benefits the truck and the air! Cali laws are so stupid!
Yeah that’s crazy! I don’t think I could live in California. Thanks for taking the time to comment and for watching!
Hey no problem! I’m always looking for new mods to do with my truck.
good tips! does anyone have a link to an oil separator for my 2022 f150 2.7L v6?
Here you go Alex! By the way, thanks for taking the time to comment and for watching. amzn.to/3Y1haz0
Get a luverne brush guard. Husky floor mats that go all the way around inside including the center hump areas. No leather seats? Thats fine. Get the clazzio seat covers. People think i have stock leather seats now. They fit that good. And look that good.
Thanks for the recommendations! I’ll check them out! Also, thank you for taking the time to comment and for watching!
What made you want to sell the 2.7 and get a 3.5?
More towing capacity that’s the only reason. I miss the mpgs I got with the 2.7. It was a great engine and I had no problems.
Where did you order the tailgate assist from
Here you go boss! Thanks for watching!
www.amazon.com/dp/B0134UWBPO/ref=cm_sw_r_as_gl_api_glt_fabc_88S6NJETM76CP6VWPX47?linkCode=ml2&tag=overdriveco01-20
Yeah I did the same wheel well liners... what a BITCH... i was told to take the wheels off to make the install easier, but of course i ignored that advice and just powered thru it...I also went with the husky floor mats.. kept the floor nice and clean during winter months
Bruh, there is no reason that those liners should have been that hard to install. Seriously, it should have been the simplest install ever but no. If I recall correctly the passenger side went on line you would expect but that drivers side; it took me 2 hours. Thanks for taking the time to comment and for watching!
@@theoverdriveconsumerchanne4424 I agree that taking the tires off would have made the job easier but in my case, I have a sloped driveway (and can't fit the truck in the garage) so I/we just had to slog through it. Driver's side was 10 minutes... Passenger side was a serious PITA - finally went to local Big Box store for a 1" hex/cap screw that I was able to get started crooked but finally straightened in the hole... then painted it black with nail polish. It *should* have been much easier. My ONLY disappointment with Husky products and I let them know that in no uncertain terms.
I bought the Ford liners, not sure who actually makes them, , super easy install in about 10 mins.
Where’s the link for the Ford easy assist for the tailgate?
Hey Brandon... Sorry for the late response. Here you go. amzn.to/3p2dtZ6
Thanks for taking the time to comment and for watching!
U have a nice truck.
If u blind me at night.
Their is no telling what will happen
Thank you.. Interesting, personally, I believe in aiming my headlights to ensure that on coming traffic isn’t impacted. Not sure where you’re going with this comment.
Clearly he is a casual that doesn't understand how trucks and the components on it function.
Actually the 2nd gen has port and direct so dont really need that can. Always do your research 😘
I am aware of the dual injection starting in 2018 year models and I still believe through my testing of several F150s it is still worth having. I have many videos on the subject actually. 🥰
@@theoverdriveconsumerchanne4424 The can if I'm right catches the oil blow by so that junk doesn't go back in your motor. I don't see how dual injectors would help with this.
@@DEDBRD-di4yj yes dual injectors do help, but I’ve done a lot of testing on the matter (plenty of videos on the subject on the channel) and it’s my belief it’s still beneficial to have one. If you can prevent extra sludge from going into your engine why not do it? Thanks for taking the time to comment and for watching!
@@theoverdriveconsumerchanne4424 Thanks, defiantly going to order one for my new Tremor.
Do 2020 f150’s need a catch can ? Thanks.
They all have dual injection however, I still want to prevent that junk from going back in the engine. My thoughts are, why allow that junk to be blown back in the engine when you can catch it. Thanks for taking the time to comment and for watching!
After 2018 no. No catch can needed.
@@officeroinker440 so 2018 f150 you don’t need it?
@@baileyjones2591 correct
You have dual injection in the 2018 year model however I believe it still benefits the engine to have one.
catch can voids warranty from what I have been told.
It shouldn’t be a problem however any service department could try to deny your warranty. If It is an issue you can simply replace the factory hose and remove the can and it’s back to “factory.” It’s honestly not a big deal and well worth doing in my opinion. There are a couple things the dealership has to do to my truck under warranty as soon as a loaner is available. I will not be removing the can for the work because I believe it will not be an issue. It’s no different than adding a k&n cold air intake. I’ll let you know differently if I experience problems. However for me, it’s worth the risk to protect my engine. Thanks for watching and providing feedback! Daniel
Why didn’t you show half your Upgrades
I had Covid… I’ll do better.
You really didn't show much of anything. Good start though. I'll keep checking back!
This is the second video I created… I’ve learned a lot sense. Thanks for watching!
@@theoverdriveconsumerchanne4424 ill keep watching. Just bought a used 2019 f150 5.0
Can we see the mods on the truck? Or are you the mod because that’s all you showed, your face. Not to be a jerk but why make a video to show upgrades then only film yourself?!?
Camera work needs some improvement. Would rather look at the truck than your mug. No offense. You didn't even show the tailgate assist.
The tailgate assist is behind the taillight so it’s sorta hard to show that. I would reference the video where I installed it but I figure you’ll bash me in that video too. However I do appreciate you taking the time to watch my video.
@@theoverdriveconsumerchanne4424 It's not really just you. I have issues with most You Tubers that just keep the camera on their mug. It would be better to look at your truck the whole time. I still appreciate your video.
It’s not the first time I’ve heard that on my older videos. The newer videos I try to focus more on on the subject rather than me. I’ll try to do better. I appreciate the criticism.
Did you rob a bank?
This is a automated message, Daniel, the channel creator is on a remote island and can not respond to comments at this time. He will respond when humanly possible.
Dude, stop showing your face and show the mods.
You're really not showing us anything
😬
It was the second video I made! I will do a complete up to date mod video soon! I’ve done a whole lot to the truck since making this video. Thanks for taking the time to comment and for watching!
ID rather see more of your truck then your face in the whole damn video, just saying, come on nah
Hey man you have to start somewhere... this was one of my first videos. I have made some improvements since and now offer a better video today. Also to note, I have since made more mods since I created this video and will soon do a update covering all of my mods. Will will be a mix of my face and my truck. Thanks for taking the time to comment and for watching!
Keep the f##### camera still, I am getting sea sick
Easy there…. This was like my second CZcams video 😎. With that being said sorry about the motion sickness…
just bought a 2020 i think people that added leb headlights r idiots led 3rd brake light cab light brake light don''t blind people
Dave, thank you for the feedback and for watching; it means a lot to me! It sounds like you had a bad experience. LEDs are actually being put in new vehicles and improve the safety of the drivers by being able to see the road better. The “idiots” are the ones that don’t properly aim the lenses so that they don’t blind oncoming traffic. My leds will be aligned properly and will not be a hinder traffic . I welcome you to watch! In the next 2-4 weeks I’ll have my installed posted. Thanks again! Daniel
Do video how to aim the led headlights
Found the guy that can't afford a headlight swap.